Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC 575 TOHANA 125120 | TOHANA | FATEHABAD | HARYANA | 125120 | L1 | Accepted-AOC Lowest | |
| 2 | Rejected-Technical | - | Rejected-Technical Not Qualified with technical specification |
| Sl No | Description | Qty | Unit | The nav Durga Coop LC society Ltd L1 |
|---|---|---|---|---|
| 1.00 | ARM REVOLVE ASSIST
Main Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. Handle: is made of 088 3 mm thick Pipe and 025 mm round M.S bright bar in bending design. All remaining frame is made by 088 *3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild stee!048 D!A pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade6305 `2RS`steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar Bearing bushes: 075mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe. Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.
Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Closing caps: are of PP/NYLON/HDPE materia!. Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads. Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations Powders Coating. All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start and finish position chart stick on | 1 | Each | 24,001 ₹24,001 Lowest |
| 2.00 | GONDOLA SWING
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.. Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.
Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Min Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe.
Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.
Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. stallation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | 1 | Each | 84,076 ₹84,076 Lowest |
| 3.00 | XOXO PANEL
TEXT
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked 151239 Minimum 114 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
A.
Play panel LLDPE (Linear Low-Density Polyethylene), roto-moulded Thickness: 6-8 mm wall thickness. Finish Seamless, anti-static, smooth surface UV Resistance. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.
Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation. Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | 1 | Each | 25,025 ₹25,025 Lowest |
| 4.00 | PLAYFUL PANEL
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 114 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
A.
Play panel designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for engaging graphics through play. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.
Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized
Safety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional). Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | 1 | Each | 31,000 ₹31,000 Lowest |
| 5.00 | DUET
Main Structure Material: Stainless Steel 304 Grade, 1.5-2.5 mm thick pipe or tube
Dimensions: Minimum 60-32 mm outer diameter (OD), 1.5-2.5 mm thickness
Cap HDPE Heigh dencity polyetheline 20mm thickness.
Fasteners Material: Stainless steel fasteners are specified to BS EN ISO 3506. Part 1 covers
bolts, screws and studs.
A.
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended | 1 | Each | 50,555 ₹50,555 Lowest |
| 6.00 | FISHY FUNNY SEE SAW
Main Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Seat: designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring, High-carbon steel or alloy spring steel, 18 mm-20 mm wire thickness, Coil height: Approx. 300 mm.
Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.
Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Shot Blasting surface treatment process using high velocity, steel abrasive Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | 1 | Each | 49,049 ₹49,049 Lowest |
| 7.00 | CHEERFUL CHURN
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic
Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.
mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh
Power Machine Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar.
Bearing bushes: 089mm OD seamless pipe.
Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.
Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | 1 | Each | 66,001 ₹66,001 Lowest |
| 8.00 | Sea-Saw
Main Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully
A. automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Seat: designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring. High-carbon steel or alloy spring steel, 18 mm 20 mm wire thickness, Coil height: Approx. 300 mm. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.
Surface Coating Primer: Shot Blasting surface treatment process using high velocity, steel abrasive Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional). Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | 1 | Each | 24,576 ₹24,576 Lowest |
| 9.00 | SIT `N` SNICKER SWING -
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239
Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zine primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.. Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.
Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut.
Pins: are made up of M.S bright bar.
Bearing bushes: 089mm OD seamless pipe.
Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | 1 | Each | 67,000 ₹67,000 Lowest |
Tender Value
₹4.8 L
EMD Value
₹9,600
Closing Date
8 Apr 2026, 5:00 pmClosed
Pankaj Kumar
Municipal Committee Jakhal Mandi
DEVELOPMENT OF PARK FOR PERSON WITH SPECIAL ABILITIES IN TAU DEVI LAL PARK IN MC JAKHAL MANDI
2026_HRY_512133_1
2026E8FBFAE0 125F 4DF2 841A 1BB1BC675978488ULB
Open Tender
Civil Works
Works
150 days
Fatehabad
civil work 2nd time Retender
2 documents required · 2 mandatory
₹500
₹9,600
Yes
12 May 2026
1 Apr 2026
9 Apr 2026
1 Apr 2026
8 Apr 2026
1 Apr 2026
1 Apr 2026 - 3 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | ARM REVOLVE ASSIST
Main Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. Handle: is made of 088 3 mm thick Pipe and 025 mm round M.S bright bar in bending design. All remaining frame is made by 088 *3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild stee!048 D!A pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade6305 `2RS`steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar Bearing bushes: 075mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe. Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.
Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Closing caps: are of PP/NYLON/HDPE materia!. Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads. Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations Powders Coating. All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start and finish position chart stick on | - | Each | - | - |
| 2 | GONDOLA SWING
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.. Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.
Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Min Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe.
Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.
Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. stallation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | - | Each | - | - |
| 3 | XOXO PANEL
TEXT
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked 151239 Minimum 114 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
A.
Play panel LLDPE (Linear Low-Density Polyethylene), roto-moulded Thickness: 6-8 mm wall thickness. Finish Seamless, anti-static, smooth surface UV Resistance. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.
Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation. Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | - | Each | - | - |
| 4 | PLAYFUL PANEL
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 114 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
A.
Play panel designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for engaging graphics through play. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.
Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized
Safety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional). Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | - | Each | - | - |
| 5 | DUET
Main Structure Material: Stainless Steel 304 Grade, 1.5-2.5 mm thick pipe or tube
Dimensions: Minimum 60-32 mm outer diameter (OD), 1.5-2.5 mm thickness
Cap HDPE Heigh dencity polyetheline 20mm thickness.
Fasteners Material: Stainless steel fasteners are specified to BS EN ISO 3506. Part 1 covers
bolts, screws and studs.
A.
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended | - | Each | - | - |
| 6 | FISHY FUNNY SEE SAW
Main Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Seat: designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring, High-carbon steel or alloy spring steel, 18 mm-20 mm wire thickness, Coil height: Approx. 300 mm.
Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.
Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Shot Blasting surface treatment process using high velocity, steel abrasive Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | - | Each | - | - |
| 7 | CHEERFUL CHURN
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic
Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.
mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh
Power Machine Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar.
Bearing bushes: 089mm OD seamless pipe.
Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.
Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | - | Each | - | - |
| 8 | Sea-Saw
Main Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully
A. automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Seat: designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring. High-carbon steel or alloy spring steel, 18 mm 20 mm wire thickness, Coil height: Approx. 300 mm. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.
Surface Coating Primer: Shot Blasting surface treatment process using high velocity, steel abrasive Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional). Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | - | Each | - | - |
| 9 | SIT `N` SNICKER SWING -
Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239
Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zine primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.. Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.
Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.
Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut.
Pins: are made up of M.S bright bar.
Bearing bushes: 089mm OD seamless pipe.
Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.
Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.
Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. | - | Each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.72 MB
BOQ_590934.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .