Special repair of master road dividing sector 32/39, Gurugram and Desilting of Surface , cross and Master drain of master road dividing sector 32/39, 32,38 and 38/39, Gurugram

Providing CCTV survey by Pan Tilt Camera with zooming and rotating 360 degree of pipe line after desilting and proper cleaning of existing SWD for inspection and condition of pipe line and submit the soft / hard copy of the result showing the location and date of survey. The CCTV survey shall be accorded as per GIS attributes and will be verified by GIS team before and after execution of work complete in all respect to the entire satisfaction of Engineer -In -Charge.

Searching of manholes with metal detector and hiring of JCB machine for excavation, dismantling of RCC slab/ footpath and providing requisite labour etc. complete in all respect to the entire Satisfaction of Engineer -in -charge

`Providing and fixing a bench made of recycled plastic waste (recycled trash), of size 1800 mm length × 900 mm width × 450 mm seating height, with sides, seat and backrest made of recycled material, including necessary supports, fittings, spray painting/finishing with approved coating, and fixing by grouting in 1:2:4 cement concrete, complete with all materials, labour and fittings as per relevant BIS specifications. Minimum weight of each bench:

Desilting and cleaning of fully choked RCC 1000 mm Dia pipe including disposal of Silt/Malba completed in all respect.

Desilting and cleaning of fully choked RCC 400 mm Dia pipe including disposal of Silt/Malba completed in all respect.

Providing and fixing factory made precast RCC drain covers of size (1000 x 500 x 100 mm) 2 nos uniformaly fitted in a RCC frame , having concrete of strength not less than M-25, reinforced with 10 mm dia 6 Nos. longitudinal and 11 Nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including the cost of Drain covers, frame, lifting hooks (using cups and strictly matched the finish level of cover), sacting, transporting, placing, fixing, providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete in all aspect, all as per direction of Engineer-in-charge.

Recovery Item- Credit of unusable material received from Milling of BC i.e. 80% of obtained material. The Quantites of the above material have been worked out on the basis of theoretical quantities laid on this road. However agency may visit before quoting rates and asses the extent of retrieved material. There shall be no measurement after actual scarifying / milling and if material after milling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of qouted rate and quantity exhibited in the BOQ shall be made. The reverse rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below reserve price willbe considered for all purpose in case the agency qoutes lesser than reserve price. The price qouted against the recovery material shall have minimum reserve price of 2194.00/- per cum).