Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹10.7 LAdmitted-Finance S 94 K 1 5 63 KANPUR U P | KANPUR | U P | -1.70% | ₹10.7 L | L1 | Admitted-Finance |
| 2 | L2₹10.7 LAdmitted-Finance | -1.00% | ₹10.7 L | L2 | Admitted-Finance |
Tender Value
₹10.9 L
EMD Value
₹1.1 L
Closing Date
13 Apr 2026, 12:00 pmClosed
EE Maintenance Division 2 (Civil) PWD Lucknow
EE Maintenance Division 2 (Civil) PWD Lucknow
Dalibagh Colony sthit Bangla No.-4, Lucknow Zila Judge awas(camp karyalaya)me do shatigrast bathroomon ki marammat,va fittings badalna, shatigrast kitchen ka navinikaran, deemak rodhi upchar, aantarik bhaag ki shatigrast plaster marammat va rangai p
2026_PWDBL_1134261_5
630/E-Tender/2025-26 dt. 01.04.2026
Open Tender
Civil Works - Buildings
30 days
Lucknow
Please refer Tender documents.
2 documents required · 2 mandatory
₹860
₹1.1 L
EE Maintenance Division 2 (Civil) PWD Lucknow
21 Apr 2026
8 Apr 2026
13 Apr 2026
8 Apr 2026
13 Apr 2026
8 Apr 2026
9 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 13.88 | - | sqm | - | - |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead DAR 15.56 | - | sqm | - | - |
| 3 | 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DAR-13.4.1 | - | sqm | - | - |
| 4 | P/A white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.80 | - | sqm | - | - |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DAR 13.62.1 | - | sqm | - | - |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre DSR 13.41.1 | - | sqm | - | - |
| 7 | Providing and laying rectified Glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours White, lovry Grey Fume Red Brown laid on 20 mm thick cement mortar 1:4 (1 cement :4 Coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete. 11.39 | - | sqm | - | - |
| 8 | Providing and fixing 1st quality ceramic, glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thck bed of cmeent mortar 1:3 ( 1 cement 3 coarse sand) and jointing with grey cmeent slurry @ 3.3 kg per sqm, including pointign in white cement mixed with pigment of matching shade complete. 8.31 | - | sqm | - | - |
| 9 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter DSR 12.41.2 | - | Rmt | - | - |
| 10 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm DSR 12.42.1.2 | - | nos | - | - |
stage.html
html • 0.03 MB
technical_2117508.pdf
techsummary_2117508.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.92 MB
T1_630.pdf
Tender Documents • 1.57 MB
BOQ_2117508.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid