Construction of Herbivorous Enclosure

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Providing and laying of stone soling/boulders (Hand Packed) including ramming, dressing and watering all complete.(Incl. all sorts of carriage)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal) crushed.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal) crushed.

Reinforced cement concrete work in beams suspended floors , roofs having slope upto 15 degree, landings balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases upto floor five level excluding the cost of centering , shuttering, finishing and rienforcement with in 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded crushed stone aggregate 20 mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Second class sand/ boulder back fillling hand packed including ramming watering all complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. @120 kg/cum

Centering and shuttering including strutting, propping etc. And removal of form for a) Foundations, footings, bases of columns etc. for mass concrete.

b) Suspended floors, roofs, landings, balconies and access platforms.

c) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Brick work with FPS bricks of class destination 75 in super structure above plinth up to floor 5" level in cement mortar l:6 mix (1 Cement : 6 Coarse Sand).

15mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand).(External/Internal) inculding all Mechanical and Head load carriage with complete job

PEBBLE DASH PLASTER Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.

Providing and laying vitrified floor tiles in different sizes (thickness to be speeified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (lcement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( l cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length ( total length 90m), having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ meter (cost of M.S. angle, C.C. blocks shall be paid separately)

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers' specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers' specifications: Two or more coats applied @ 1.25 liter/l0sqm over and including one coat of special primer applied @ 0.75liter /l0sqm.

Providing and laying water proofing treatment on horizontal/vertical faces by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @l.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. For the purpose of measurement the entire treated surface will be measured

Providing and fixing in position collapsible steel shutters with vertical channels 20xl0x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles,including applying a priming coat of approved steel primer

Supplying and fixing grilled rolling shutters manufactured out of 16mm dia.M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured.) and arrangements for inside and outside locking operation complete, including the cost of providing and fixing necessary fixtures

Extra for providing mechanical device chain crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

SANITARY AND PLUMBING ITEMS Providing and fixing 3 layer PP-R (Poly propylene Random eopolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching. refilling etc a) PN-10 pipe , 50mm OD (SDR-11)

PN-16 pipe, l6mm OD(SDR-7.4)

Providing and fixing PPR Unions PPR Union 50mm

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) a) 50 mm nominal bore

a) 60 mm nominal bore

DRAINAGE DISPOSAL Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: within a lead of 50 metres: All kinds of soil

Dry random masonry in foundation & plinth using quarry stone.

Reinforced cement concrete work in beams suspended floors , roofs having slope upto 15 degree, landings balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases upto floor five level excluding the cost of centering , shuttering, finishing and rienforcement with in 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded crushed stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. Qty vide concrete item 1:1.5:3 above @ 130kg/cum

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. A) Pipe l00mm

Floor trap 100 mm

Door T 100 m

collars 100 m

Providing and fixing of tripple layer water storage tanks of approved quality and make viz (SINTEX, NATIONAL, PLASTO etc) complete job.

Carriage of materials by Mechanical Transport including loading, unloading and stacking a) Sand av. lead Distance 90 km

b) Stone aggregates below 40 mm nominal size average lead of 90 km

c) Stone aggregates below 40 mm nominal size average lead of 90 km

d) Bricks (Average lead of 90 km)

e) Stone (Average lead of 90 km)

PART - B (ELECTRICAL WORKS) Wiring for Light point/Exhaust Fan/ Wall Fan/Ceiling fan Point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed (underground) including PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm (excluding the cost of earth wire). FR PVC insulated multistrand copper conductor single core cable etc required

Wiring for 6/16 amp switch socket outlet power point with 3x4mm sq (P+N+E) FR PVC insulated 1100 volt grade multistrand copper conductor wire concealed/recessed manner through fresh 25mm dia PVC conduit including cost of cutting/making good chases in brick work rough plastering & including the cost of supplying & fixing mounted 4no. l6amp modular 5/6 pin combined socket outlet along with 16 amp modular control switch both mounted on GI box etc in each switch box and to be completed as per specification and as required including bend, socket etc.

Circuit wire to be laid through in Fresh PVC conduit for sub mains using following sizes of multistrand PVC insulated copper wire including the cost of PVC conduits complete job. a) 2x2.5 sq. mm + lxl.0 sq. mm earth wire

b) 2x6.0 sq. mm + 1x1.0 sq. mm earth wire

c) 2xl0 sq. mm + 1x1.0sq. mm earth wire

Providing and fixing of LED of standard quality and make with desired wattage including deep concealed box of standard quality complete. 14 Watt LED

Supplying and fixing following way, single pole and neutral, sheetsteel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 2x24 way, Double door

Supplying and fixing following rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. b) MCB double pole 10 to32 A

c) MCB 4Pole 63 A

Providing, laying testing and commissioning of double run 35 mmsq 3 'Z2 core XLPE Al. cable Armored cable in existing duct/Rack.

Supplying and making end termination for following size of cables 3.5 /sing1e core PVC insulated and PVC sheathed / XLPE aluminium conductor cable/ single core copper wire of 1.1 KV grade as required. (dowels make)

Providing/installation, testing and commissioning of Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre lone etc. with charcoal/ coke and salt as requried

Providing and laying of 25mm x 3mm Copper earthing strip including galvanized nut and bolts as per site requirement.

SAHIL SHARMA (BID ID -2694089)

RAJPOOT EARTH MOVERS AND CONSTRUCTION COMPANY (BID ID -2694011)

AMNEET PAUL SINGH (BID ID -2693994)

TRIKUTA INFRATECH AND DEVELOPERS PVT LTD (BID ID -2693517)

SANJEEV KUMAR SHARMA (BID ID -2693960)

M/S DEEPAK KUMAR GUPTA (BID ID -2694009)