NIT No. 27(2025-26)M-4 ITEM No. 38

Select, Excess (+), Less (-)

Tender Inviting Authority: EE(E&M)M-4

Name of Work: -Procurment of Starter panel up to 10 HP submersible pump set for T/Wells installed AT Palla Yamuna Flod Plain area

Contract No: NIT No. 27 (2025-26) Item No. 38

Sl. No. Item Description Item Code / Make Quantity Units Applicbale % of Basic Rate (on which Service Tax will be calculated) Applicbale % of Basic Rate(on which GST will be calculated) Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P GST in % Service Tax in % GST Amount in INR Service Amount in INR Total Unit Price in INR

1.01 Indoor LT Cubical type Indore electrical Panel board Floor/Wall Mounted of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items. 1. MCCB 63 Amp, 4 Pole-1No. 2. RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No 3. Fully automatic star delta starter of 10HP, 3Phase oil immersed type 1No 4. Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No 5. Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No 6. LED Indicating lamps with fitting (a set of 3 lamps) 1Set 7. Shunt capacitor of 5 KVAR with three phase isolator 1No 8. Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No 9. Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No 10. Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thumbing etc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved. SOR 10.2.2 item1 Nos. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select %

Please Enable Macros to View BoQ information