Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Tender Found in Order | |
| 2 | L2₹26.5 L+₹79,578 (3.09%)Rejected-AOC | L2 | Rejected-AOC Other than lowest tender |
Tender Value
Refer Docs
EMD Value
₹58,600
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO T-45 AT CHOWKIBAL AND PROVN OF BATHROOM NEAR BLDG NO T-84 AT CHOWKIBAL TRANSIT CAMP UNDER GE 874 EWS
2022_MES_548292_1
GE 874/EWS-31/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹58,600
Yes
12 Nov 2022
27 Aug 2022
19 Sept 2022
27 Aug 2022
17 Sept 2022
3 Sept 2022
Amount
B/R and E/M Portion
Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out Soft/loose soil all as directed.
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc in hard /dense soil all as specified.
M&L plain Cement concrete as in foundation, filling & mass concrete type D2 1:4:8 using 40 mm graded aggregate all as specified.
M&L Brick work with sub class 'B' brick straight or curved on plan exceeding 6 mean radius built in cement mortar 1:4 all as specified.
M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4.
Returning and filling including spreading leveling watering and well ramming in layers n.exc 25 cm in hard/ dense soil all as specified.
Removal of excavated materials not exc 50cm and depositing where directed at a level n.exc 1.5m above the starting point all as specified.
M&L Mild Steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.
M&L Mild Steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.
M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone agg as in beams, cantilevers, bressummers, lintel over 1.5mtr span complete all as specified and directed by engr in charge.
Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
M & L for rendering 15 mm thick on Brick masonry surfaces or surfaces other than fair face of brick work in cement mortar 1:4, finished even and smooth without using extra cement.
M&L for rendering 10mm thick cement mortar 1:6 as in internal Plastering to fair face of brick masonry walls and finished even & smooth without using extra cement.
Stractural steel work such as Roof trussed (framed) purlins crane guntries rail & fastening and heavy bracket (beam tea angle channel or flat section of Fe 410 -W (GdeE- 250) quality-A ) including distance pieces cleats etc all as specified.
M & L two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth all as specified.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any color having tensile strength of 550Mpa as in roof covering /cladding to wall , fixed with self tapping screws as specified.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M & L two coats of cement based paint on external wall surfaces over a coat of primer including preparation newly plastered surface complete all as specified.
M & L two coats of oil bound distemper, on internal wall surfaces over a coat of primer including preparation newly plastered surface complete all as specified.
M&L Moorum/red bajri filling in floors or paving, laid in layers n.exc. 15 cm thick, spread, leveled and rammed including watering.
M&L hard core filling under floor, with broken stone or boulder exc 63mm and n.exc 100mm gauge of sand stone complete all as specified.
M&L for 75mm thick PCC type D2 1:3:6 (40 mm graded crushed stone agg) as in sub base of floor.
M&L for colored glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surfaces such as skirting, dados etc jointed in neat cement slurry and pointed in white or colored cement to match, set and jointed in neat cement slurry and over 15mm thick backing coat in cement mortar 1:4 laid, complete all as specified and directed.
M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm and n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over 15mm thick screed bed in cement mortar 1:4 laid over and including 25mm thick PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate, complete all as specified and directed.
M & L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints.
M&L 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.
M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.
M&L Glazed and Skelton shutters 2nd class soft wood 30mm thick,open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc supplied and fixed to chowkhat.
S&F soild PVC door frame of size 50mm x 47mm made out of 5mm plaint color PVC sheet reinforced with MS square tube, and fitted in opening all as specified.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain color PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete omplete with glazing bars, dove tailed or welded including one shop coat of zinc chromites primer complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handles,steel peg stays complete with glazing bars dovetailed or welded,complete all as specified and directed.
S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed.
Mild steel butt hinge medium weight cold rolled 100mm size.
S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section.
S&F Aluminium handles, cast type, anodised 100mm.
S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed
S & F 250mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.
S & F aluminum handles, cast type, anodized 150mm long.
S&F MS butt hinges 75mm long medium weight.
S&F 125 mm long aluminium alloy, anodised barrel tower bolt of extruded section.
S&F Aluminium handle, cast type, anodised 100 mm long.
75 mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, surfaces finished even and fair using extra cement, complete all as specified and directed.
S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I.
S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.
S&F tubing galvanized iron medium grade with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm.
S&F 20 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed
S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 15mm dia
M & L for Vitreous china wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste Pipe complete.
M&L for Vitreous china squatting Pan "Orrisa Pattern" size 580 x 440mm white with integral foot rests incl flush pipe of PVC 32mm dia for low level cistern fixed in repair complete all as specified
S&F vitreous China bowl urinal flat back, size jof 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)
S&F PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets 10 Ltr capacity fixed in repair complete all as specified and directed.
Soap dish, vitreous China white, approximate size 160x 160x90mm.
S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified.
Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions
M & L for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type.
S & F Waste coupling of PTMT (half or full thread ). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB , sink.
Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked).
S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement
S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.
S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified.
S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, complete all as specified.
S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified.
M&L for PVC (SWR) WC connector with lip ring 110mm.
M&L for PVC (SWR) vent cowl for 75 mm dia all as specified.
Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified.
S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union
Lagging on pipe of internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842
S&F ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as directed.
Grating doom 100mm dia of PTMT Minimum weight 25gms.
M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 100mm bore pipe all as specified.
M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed.
Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.
Construction of 20 users septic tank (brick construction) including inlet and out let chamber with top of slab at ground level including necessary earth work and disposal of surplus soil to a distance not exceeding 50m supplying and placing vent pipe, in position to manhole cover brick construction and all other relevant works, complete, all as specified and shown on drawing No CESZ/TD-1080/2011 Sheet 1/1 dated 01.12.2011.
Soakage well of size 1.80m x4.50mtr Excavation in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC slab cover including RCC precast man hole cover having 6 mm plate embeded alraround/fibre reinf covered with angle iron frame vent shaft in sludge chamber etc.
Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness.
Dismantling of timber scantlings 40 sq cm and over in section in any position in unframed work.
M &L for second class soft wood as in scantling clean sawn fixed in position.
M & L for second class soft wood as in scantling clean sawn fixed in position but except wood.
Dismantling of boarding, any description, fixed in any position with nails(in floor etc)
M & L for 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps.
M&L 2nd class hard wood, 35 mm wrought treads with rounded nosings, with 20 mm wrought risers on tongued both edges, glued, wedged and blocked complete
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.
M&L 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work.
Plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails.
Dismantling brick work or stone masonry built in cement mortar.
Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc.
Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering.
Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutter).
Taking down chowkhats or frame not exc 1.5 Sqm each ( without taking off shutters from the frame).
Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads.
M & L sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 in each pane, 3mm thick.
S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed in repair all as specified.
M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths.
M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of old wooden surface exc 10 cm width or girths.
Demolition of reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L Reinforced cement concrete Type B1 1:2:4 (using 20 mm graded aggregate, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.
M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc
M&L Raking out joints/ pointing to masonry or brick-work in single detached joints for flashing, etc. as in cement or cement lime mortar.
M&L raised pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto course all as specified and directed by Engineer-in-Charge.
Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.
Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for 3 pin 5A socket outlet on the same board controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.00 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.
Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor
Supply & fixing Switch modular type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
Supply & fixing Switch socket combination 2 in 1, 5 and 6 Amp Modular type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips
Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp Modular type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips
Supply & Fixing Socket outlet 2 in1, 3 pin 6 Amps Modular type complete all as specified and directed.Make : Havells/Anchor/ Philips
S&F rectangular boards/ blocks 30x25x4cm depth closed recessed, complete all as specified and as directed by Engr-in -charge.
House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay, complete all as specified. Make: Havels/Anchor/Polycab/SSK.
S&F Single phase Voltage protection relay of trip setting 85 to 500 V AC complete with connecting testing and commissioning. All as specified and directed by Engr-in-Charge
M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white colour casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.
Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor
Supply and fixing lamp holder bracket type, PVC/polycarbonate type with skirt cap suitable for batten fittings, complete all as specified and direted.Make : Havells/Anchor
Supply and fix LED Bulb 9 Watt. Make Havells/Bajaj.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection single door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
Supply and fixing MCB SPN 40 to 63 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Supply laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts graded standard aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed. Make Havells/Polycab/Gloster
Supply laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts graded standard aluminium conductor of size 16 sqmm 2 core complete all as specified and directed. Make Havells/Polycab/Gloster
S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 16 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.
S & F in repair PTMT nipple 20 mm suitable for HDPE water tank, (Minimum weight 15mm 38gms/20mm-45gms /25mm- 65gms)
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.
Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron earth lead strip 32x6mm by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earthing pit and cover 55mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) common salt, charcoal and testing on completion, all as specified and directed.
S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 25 mm bore GI tubing.
M/S AB AHAD RATHER
Bidder Name
M/S AB AHAD RATHER
M/S AB HAMID GEELANI
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .