Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹67.9 L
EMD Value
₹1.4 L
Closing Date
9 Mar 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
15 conditions · 3 needing a document upload
Electrical License: The tenderer/Firm should have valid electrical contractor license on their own name or firm name issued by Electrical licensing board of any state. The license should have been issued on a date prior to the date of tender opening. Copy of License shall be uploaded online failing which offer will be rejected.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month before the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar nature of work: "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc. (with or without supply of items / equipment) for 230V, 1phase or 415V, 3phase system or higher voltages".
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Extension of Cover Over Platform so as to cover the entire remaining length of all platforms at Parbhani, Purna and Mudkhed stations. -Electrical Arrangements.
NED-E-GS-05-2025-26
NED-E-GS-05-2025-26
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹1.4 L
9 Mar 2026
16 Feb 2026
23 Feb 2026
49 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 67,89,280 | ||
| — | 650.00 | — | — | ||
| Supply and fixing of 20 W LED Tube Light fittings conforming to specification no. SCR/LED (ID) LIGHT FITTINGS /002 (Amdt.4)-2017 or latest. Make:Havells /Syska /Crompton/Bajaj or similar | — | — | — | 2,44,400 | |
| — | 650.00 | — | — | ||
| Supply of 4' 40 W LED surface mounting /Suspended Batten Light fittings conforming to specification no.SCR /LED (ID) LIGHT FITTINGS /002 (Amdt.5)- 2023 or latest. Make: Havells /Philips/Bajaj or similar | — | — | — | 6,83,800 | |
| — | 350.00 | — | — | ||
| Supply and fixing of 28W 1200 mm BLDC Ceiling Fan, BEE 5 star rated with remote control and all connected accessories conforming to class 1 of IS:374/1979 with amdts 1 to 6 including labor charges. Make:Gorilla/Havells/ CG/Bajaj or similar | — | — | — | 8,42,800 | |
| — | 100.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module (Coral sparkle silver)duly erected flush to wall with required chiseling and finishing with cement mortar /POP as per required to match the background in an approved manner. Make:Legrand/Havells/ GM or similar | — | — | — | 29,500 | |
| — | 200.00 | — | — | ||
| Supply and erection of modular type 5 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand /Havells/GM or similar | — | — | — | 25,000 | |
| — | 200.00 | — | — | ||
| Supply and erection modular type switch 6A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/ GM or similar | — | — | — | 9,600 | |
| — | 1600.00 | — | — | ||
| Supplying & erecting mains with 2x4 sq mm and earth wire 2.5 sq mm FRLSH PVC copper wire in HMS PVC conduit min. 20 mm dia, as per specification Make:Havells/Finolex /Polycab or similar | — | — | — | 3,00,800 | |
| — | 1650.00 | — | — | ||
| Fixing, supply of wiring material and wiring in PVC conduit pipe with 3x 1.5 sq. mm copper conductors with all connected materials connecting and commissioning of Light assembly/fans in the COP/FOB including supply of PVC Conduit pipe (ISI mark) and all connected accessories. PVC insulated copper wire shall conform to specification IS:694/1977 and PVC conduitshall conform to IS: 9537. | — | — | — | 5,04,900 | |
| — | 100.00 | — | — | ||
| Mobile charging point with trays also (Supply & fixing of mobile phone holder of Size 130 mm x 105 mm x 35 mm as per the approved sample including all accessories and works complete. The rate also includes supply of fasteners for fixing cell phone trays on the walls/pillars/or as advised by Rly. engineer at site.) | — | — | — | 20,000 | |
| — | 40.00 | — | — | ||
| Provision of supply, fixing,connecting, and testing of fabricated junction box (L-56cm, W-23 cm, D-15 cm) made with 18 SWG sheet steel enclosure with door and locking arrangements and comprising of 8 nos of 6/10/16 A SP MCB, 2 nos of 16/32 A DP MCB with neutral and earth links and 8 Nos. busbar supporting insulators and fixing with suitable mounting with MS clamps as per site condition.Make: M/sHavells/Legrand /L&T or similar | — | — | — | 1,21,280 | |
| — | 1500.00 | — | — | ||
| Design, Fabrication, Supply, installing and fixing 225 mm width, 50 mm depth, 2 mm thich sizes perfect G.I tray (cable Tray ) including horizontal stiffener to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable G.I Clamps/G.I angles/G.I flats and with necessary connected hardware etc. | — | — | — | 8,28,000 | |
| — | 120.00 | — | — | ||
| Supply of 50 mm dia 'B' class ERW GI pipe conforming to IS: 1239 Part 1 (2004) and fixing with suitable clamps on wall/building including laying of cable through GI pipe. | — | — | — | 55,560 | |
| — | 4500.00 | — | — | ||
| Supply and laying of ISI marked 4 core 25 sqmm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed, armored with galvanized round steel wire or steel strip and with Aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098 (Part-1) /1988with amdt. no. 1,2 & 3 (reaffirmed 2005) or latest. Make: Finecab/Polycab/Finollex/Havells/KEI or similar | — | — | — | 9,04,500 | |
| — | 800.00 | — | — | ||
| Supply and laying of ISI marked 4 core 50 sq mm cross linked polyethylene (XLPE)insulated LT UG cable, PVC outer sheathed,armored with galvanized round steel wire or steel strip and with Aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988with amdt. no. 1,2 & 3 (reaffirmed 2005) or latest. | — | — | — | 2,53,600 | |
| — | 50.00 | — | — | ||
| Supplying and erecting of any size electrolyte copper patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% copper purity with fixing arrangement (like lug or bottletype lug) to both the end with high grade polyolefin insulation sleeve complete. | — | — | — | 62,150 | |
| — | 30.00 | — | — | ||
| Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching-ON & switching-OFF street light asper daily sunset and sunrise respectively automatically having 4-digit LED continuous time display, relay output 230 V/10A with 10 hrs battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S.box in an approved manner. | — | — | — | 1,76,640 | |
| — | 20.00 | — | — | ||
| Supply of 4 pole power contactors with 230v AC-1 Coil of 32A 2 NO 2NC Power poles.Conforms to IS /IEC 60947-4-1, WITH FINGER PROOF ip 20 terminals Completely Shield for dusty atmosphere Low VA Burden Wide operating band coils with Class H Insulation. Make: Havells/L&T/Schneider or similar | — | — | — | 24,220 | |
| — | 20.00 | — | — | ||
| Supply of 4 pole power contactors with 230v AC-1 Coil of 60A 2 NO 2NC Power poles.Conforms to IS /IEC 60947-4-1, WITH FINGER PROOF ip 20 terminals Completely Shield for dusty atmosphere Low VA Burden Wide operating band coils with Class H Insulation. Make: Havells/L&T/Schneider or similar | — | — | — | 89,100 | |
| — | 20.00 | — | — | ||
| Supply, fixing, connecting and commissioning of SMC cable termination junction box of size 250 x 200 x 105 with shock proof, rust proof, fire resistant, weather proof with IP65 protection suitable for termination of 2/4 core LT UG cables upto 70 sq.mm. 3 phase 415 V including hylam sheet, heavy duty terminal connections, clamping arrangements. | — | — | — | 92,400 | |
| — | 20.00 | — | — | ||
| Design Supply,testing of ON/OFF timer arrangement for ON/OFF operation of platform lighting in MS Sheet enclosure 12 inches X 10 Inches size with door including following accessories complete. (1) 3 Pole contractor,45 A, ACI (25A, AC3) model type MNX 25 Of L&T make or Legrand or Havells.(2) Micon 225 Timer cat ref. no 2 ANDTO of L&T Make Legrand, Havells.(3). On push button with elements of L&T, Legrand, Havells. (4).LED indication lamp.(5). Powder coated MS sheet box Sizes 12 inches x 10 Inches X 6 inches including clamping arrangement. (6) 4-Way terminal connector and internal arrangements. Offer accepted make / brand: SSGE, Model No. SSGE/ODT/16 and All accessories make: L and T | — | — | — | 96,760 | |
| — | 1.00 | — | — | ||
| Supply, installation ,testing and commissioning of 100 KVA,415 V ,three phase 4 wire , 50Hz, diesel Generator set with AMF panel complete in all respect as per specification attached. | — | — | — | 13,51,376 | |
| — | 4.00 | — | — | ||
| Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diamete rLow Carbon Steel with 250-micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete as per RDSO specification No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008. | — | — | — | 44,724 | |
| — | 50.00 | — | — | ||
| Supply, fabrication, laying, welding, and connection of GI Flat of size 25x3 mm from earth pit with GI nut Bolt suitable size. | — | — | — | 4,450 | |
| — | 20.00 | — | — | ||
| Supply and fixing of 25 x 3 mm EC grade copper strip for connecting earth terminal to the bus bar in for maintenance earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008 (Amdt. 1) or latest. | — | — | — | 23,720 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC2022works.pdf
ATTACHMENT
ACS1to10merged.pdf
ATTACHMENT
TBGS05202526FLCOPPAUPBNandMUE.pdf TENDER BOOKLET
ATTACHMENT
100KVADGSetspec.pdf
ATTACHMENT
TBGS05202526FLCOPPAUPBNandMUE.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .