Providing of Cycle shed and fixing of main gate at EE/MRT office in EEDC/Erode

Amount

Sectioning &Trimming the Paver block laying yard in all soils Except hard rock by using JCB, leveling, watering and surfacing etc., Complete.

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders in all soils including the cost of all materials, T&P 's, leads, lifts, etc., complete.

Earth work excavating and depositing on bank with initial lead of 10m and initial llift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting, as per standard specification, etc., complete.

Filling with M- sand for filling the foundation and floor including M-sand, filling charges, with all leads and lifts, watering, consolidation etc., complete.

Plain cement concrete in CC 1:4:8, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Brick work in CM 1:5 using class II bricks size of 9" x3" x 41/2" for basement & super structure including cost of all materials, labour charges, curing scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer.

Providing PCC 1:2:4 mix using 20mm HB stone for foundation including cost of all materials, lead and lift etc complete.

Plastering in 1:3, 20 mm thick including the cost of all material, cement, labour charges, all leads, lifts as per standard specification.

Supplying and filling gravel including cost of all material, leveling, consolitating, lead and lift etc. complete

Supplying and fixing of MS structural steel section (ISI) suitable for supporting the metal roofing sheet for cycle shed roof including cost of all materials, labour charges, with painting two coats over one coat of primeing etc complete.

supplying and fixing of sheet using PPGI sheetof 0.44 mm thick powder coated roll forming profile with designed sheets for roof including cost of material, labour lead,lift etc complete.

Supplying and laying of Rubber moulded Hydraulic pressed paver block 83mm thick high strength type conforming IS15658-2007 of Rubber moulded Hydraulic pressed paver block lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone patteren Over a base layer of Plain cement concrete in CC 1:4:8,10cm tk, using 40mm HBG metal including cost of cement, with 6mm HBG stone jolly cushion below the uniform shape of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, 6mm HBG metal jelly cushion 150mmthick laying (joint filling using P.sand) out of pavement cut the pieces to fix the edge vibarating the pavers, sweeping transporting, loading unloding of laying paver block as per standard specification.etc., complete.

Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal for Gate pillar footing including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. but excluding cost of steel reinforcement.

Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal for Gate pillar up to FGL including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. but excluding cost of steel reinforcement.

Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal for Gate pillar above GL including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. but excluding cost of steel reinforcement.

Providing steel reinforcement MS/RTS rods upto16mm dia for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Fabricating,& supplying and fixing of Main gate using structural steel angles, flats, plates, squares etc., as per specification and as directed and painting with two coats of approved colour enamel paint over one coat of red oxide primer including cost of steel and painting materials, lead, lift, labour, as per standard specification, etc., complete.

Wiring with 2 x 1.5 Sq.mm PVC insulated single core unseathed copper conductor Cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with GI switch box in flush with wall with continuous earth line connection of 1.5 Sqmm wire and 6 A Switch 1 Module of open light point/Fan point

Supplying and fixing of 4’ 20W single LED Tube light and fittings complete with ISI mark, electronic choke and condenser with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete. (philips/ Crompton make).

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu