Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹20.6 LAccepted-AOC | 1 | Accepted-AOC Being lowest | |
| 2 | 2₹23.0 L+₹2.3 L (11.0%)Rejected-Finance C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹23.6 L+₹2.9 L (13.8%)Rejected-Finance | 3 | Rejected-Finance Not being lowest | |
| 4 | 4₹24.4 L+₹3.7 L (17.8%)Rejected-Finance 91 DEFENCE ESTATE PHASE II NEAR AMBEDKAR PARK DEORI ROAD AGRA UP | AGRA | UTTAR PRADESH | 282001 | 4 | Rejected-Finance Not being lowest | |
| 5 | 5₹25.6 L+₹4.9 L (23.6%)Rejected-Finance | 5 | Rejected-Finance Not being lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
18 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE AGRA
112, TAJ ROAD AGRA CANTT
REPAIR / MAINT OF INTERNAL ROADS INCLUDING ROAD FURNITURE AT FMC, METCAFF AND CERTAIN PLACES OF AGE B/R-I UNDER GE (EAST) AGRA
2023_MES_623143_1
84314/e8
Open Tender
Civil Works
Item Rate
180 days
AGRA
MES contractors enlisted in Class D category a(v) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹500
GE EAST AGRA
₹60,000
5 Jan 2024
13 Oct 2023
25 Nov 2023
13 Oct 2023
18 Nov 2023
27 Oct 2023
13 Oct 2023 - 20 Oct 2023
Amount
Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.
M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom & finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc complete all as specified and directed.
M&L for applying evenly a priming/tack coat with mechanical sprayer over old black top surfaces with bituminous primer (VG-10) at 5kg per 10 sq metre complete all as specified and directed.
M&L for premixed bituminous macadam using paving bitumen of VG-30 grade with binder content 4% by weight of total mix and complacted to required gradient and camber laid by mechanical paver (consolidated thickness 75 mm or less) with 8 to 10 tonne power vibrator road roller etc complete all as specified and directed.
Material & Labour for 30 mm thick (consolidated average thickness) bituminous premix asphaltic semi dense concerete with 5.5% % binder (of paving bitumen VG-30) content by weight of total mix, rolled & compacted with 08 to 10 tonne power road rolled to required camber and gradient (Laying of bituminous premix asphaltic semi dense concrete with mechanical paver) complete all as specified and directed.
Supply and fixing in repair metal tubular dealineator in repair made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) of size (150x150x300mm) complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in subbase of flooring complete all as specified and directed.
M&L for Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
S & F in repair plastic speed bump is designed so dynamically and compact that it can bear maximum load on it.the body of the running speed bump is made of PE material.two highly reflective reflectors molded in PMMA material are welded with PE base plate through ultrasonic welding process and then fixed on to the speed bump so that dust and water cannot touch reflector's inside are and thus it maintains its reflectivity for a long time.it is available in yellow and black colours.(Dimensions : length -750 mm,width-250 mm,height-75 mm),weight and load capacity upto 100 ton complete all as specified and directed.
M&L for preparation of road surface and applying hot thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as a arrow dashes, letters etc,on road or pavement with using retro reflective thermoplastic road marking paint of approved make applied with machine all as per manufacturer's instructions & colour as directed by GE complete all as specified and directed.
Supply and fixing in repair convex mirror 120 CM in size out door purpose including stand / padestal embedded in PCC block 1:2:4 type B-1 (using 20 mm graded stone aggregate) size 45 x 45 x 60 cm and including necessary earth work & form work complete all as specified and directed.
S&F of dual directional reflective cat eye of impact resistant plastic 100x80x15mm ultra violet resistant yellow colour having micro prismatic/cube corner reflectors suitable for fixing with 2 steel zinc plated 12 x 120 mm nails + epoxy/ bitumen adhesive complete all as specified and directed.
S & F with stainless steel frame of 50 mm dia and 1.8 mm thickness of Stainless steel pipe for framing of Sign board including cutting,welding and framing of stainless steel structure including necessary clamps etc Retro-reflective,double sided,road name,Sign boards comprising of 4 mm thick aluminium Composite panel,(ACP) mill finished or PDVF coated or as specified as base board,micro prismatic retro reflective sheet and electro cut coloured overlay film.the ACP shall have thickness of 4 mm with 0.5mm thick skin of aluminium on both sides.the ACP shall be routed,folded and fixed on the stainless steel frame with VHB tape,24 mm wide and 2.3 mm thick provided through out the length and breath of the frame including riveting at the right angle more than 300 mm center to center ensuring that no riveting is seen on either face of the frame.on the front and backface of the ACP,Microprismatic retroreflective sheet Conforming to type XI of IRC:67:2012 shall be presurre fixed as background sheet which will be over laid with electro cut transparent film of approved make and colour to create a desired road name information message in cluding grouting in PCC 1:2:4 type B-0 (12.5 mm graded stone aggregate ) of size 0.3x0.3x0.45 m below ground level Complete all as specified and directed. Note: Rate shall be deemed to be included all materials,labour,Equipments,fabrication,cutting and welding and any other specific type of work is required for preparation of sign board
M&L two coats of synthetic enamel paint over a coat of primer on new concrete /kerb surfaces stone including prepartion of surfaces complete all as specified and directed.
C P Singh and Co
BHARAT ASSOCIATES PVT LTD
Gupta Automobiles
M/S OMKAR SINGH YADAV
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .