Repair Work

Amount

Providing and laying cement concrete 1:2:4(1cement:2 sand:4 graded stoneagg.20mm nominal size)and curing complete including cost of from work in foundation and Plinth.

White glazed tiles 6mm thick is flooring ,treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement :3 sand)finished with flush Pointing in white cement.

White glazed tiles 6mm thick is skirting risers of steps and dado 12mm thick in cement mortar 1:3(1 cement :3 sand)and jointed with cement Slurry

Providing corrugated G.I. Sheet roofing fixed with galvanized iron J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafters and trusses .(063mm thick sheet).

Steel Work welded in built up sections, trusses and framed work including cutting,hoisting ,fixing in position and applying a priming coat of red lead paint .In beams joists channels ,angle tee flats with connecting Plates or angle cleats as in main and cross beams ,hip and jack rafters, purlins connected to common rafters and the like.

Providing and fixing angle iron Door, windows, clearstory window frame manufactured from street iron section of 40x40x6mm,thickness including, hinges ,jamb,lockjamb,beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means ,lugs with split end tail to each jamb welded or rigidly fixed by mechanical means, lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved street primer after Pretreatment of the surface as directed by engineer in charge.

Providing and fixing 1 mm thick M.S. Sheet garage door with frame of 40mm x 40mm x 6mm angle iron 3.15 M.S. gusset Plates at the junctions and corners, all necessary fitting complete including applying a Priming coat of red lead Paint using flates 30mm x 6mm for diagonal braces and central cross Pieces.

Painting two coats (excluding Priming Coat)on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matters(Enamel paint other than white)

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises ,internal rounded angle, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth in c.m. 1:6(1cement :6sand)

White washing with lime on undecorated wall surfaces two coat to give an even shade including thoroughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter.

P/F to wall ceiling and floor galvanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor (15mm nominal bore).

Providing and fixing vitreous china wash down water closet squatting pan (Indian type W.C.)size 580mm (earth work, bed concrete footrest and trap to be measured and paid for separately)(Orissa Pattern).

P/F Vitreous china wash basin with single hole for Pillar tap with C.I. or M.S. Brackets Painted white including cutting holes and making good the same but excluding fittings(flat back 630mm x 450mm).

Providing and fixing C.P. Brass waste for wash basin or sink(32mm dia).

Providing and fixing brass bib tap (Superior or heavy type) 15 mm dia.

Providing and fixing C.P. Brass Pillar tap with capstan head 15mm dia.

Providing and fixing C.P.Brass angle valve 15mm without nuts and pipe.

Providing and fixing PVC Connection with brass union 300/450mm length 15mm nominal bore.

Providing and fixing brass full way valve with wheel 15mm nominal bore.

Providing and fixing brass ball valve (Horizontal Plunger type) High Pressure with Polythene Plastic Floats 15mm nominal bore.

Providing and fixing P.V.C. Floor trap ISI Marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc,complete(110mm x 90mm).

Providing and fixing high pressure P.V.C. Spigot and socket, waste and ventilating pipe ISI marked including fixing with approved adhesive etc. complete(110mmdia)

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc, complete (110mm dia).

Providing and fixing PVC P or S trap for water closed (Squatting Pan)ISI marked including jointing the trap with the Pan and PVC pipe with approved adhesive etc, complete(110mm dia).

Providing and fixing 100mm dia chromium Plated grating of superior quality for floor ,gully or nahani trap.

Hem Raj

Jugal Kishore

ROSHAN LAL VERMA