CERTAIN REPAIR TO SEWAGE LINE, MANHOLES, STP AND REPAIRS TO DRAINS BOUNDARY WALL PATH HARD STANDING AND MISC REPAIRS AT 213 TRANSIT CAMP UNDER AGE BR-I OF GE NAGROTA

Amount

Cleaning/clearing of sewage line (including manholes except 1st manhole) 100mm to 350mm bore of any description under ground any depth, removing any type of blockage including desilting, descaling and de-chocking from drain with combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV having facility of high pressure vacuum including provision of hydraulic application through high pressure thermoplastic fiber based water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning including clearing of manhole, sludge water shall be disposed of directed including taking of manhole cover and re-fixing the same after cleaning, complete all as specified and directed.

Dewatering/Desludging & cleaning of manhole of any depth, any size, taking out water mixed with sludge and solid sludge including any foreign materials such as stones, tree hedges etc, removing and depositing sludge at a distance not less than 20 meter in a ditch including necessary excavation of pits and covering with earth & spraying unslaked lime on the covered ditch as well as around the manholes to make hygienic including necessary flushing of manholes with water after desludging, complete all as specified and directed.

Taking out/Pumping out contaminated sewage water from septic tank/soakage well including inlet/outlet chamber after plugging incoming sewage line through combined high pressure water jetting cum suction (vacuum) type machine mounted on HCV Honey sucker vehicle of capacity not less than 6000 Ltr each and facility of high pressure vacuum and removing off the same in the pit to a place , complete all as specified and directed by Engr-in-Charge. Note: One lorry unit will be considered for full load of 6000 Ltr irrespective of taking point.

Desludging the solid sludge from septic tank, soakage well including inlet/outlet chamber, removing out all scum, silt reduce sludge (both organic/inorganic nature) after plugging the incoming sewage line through combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV and facility of high pressure vacuum and removing and dumping off the same in the tank to a place out side cantonment at the place marked for the purpose by local municipality or area controlling authority, complete all as specified and directed. Notes:for ser item No. 1.00 to 4.00:- (i)Soild sludge means bulky mass of sludge which remains at the bottom of septic tank/soakage will after pumping out/taking out sludge water. (ii) Contractors are advised to ascertain the place suitable/earmarked for disposal of sludge/sewage water from local municipality of area controlling authority before quoting their rates. Disposal of wastes at suitable place shall be sole responsibility of contractor and no represention or objection in this regard will be entertained at any later stages.

Cleaning of soil waste pipe (cast iron/PVC ) 75/100mm bore laid in ground any slope or gradient and depth 3m by roding taking out all residue from the lines/manholes including water and depositing at a distance not less than 20m in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch as well as around the manholes to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc, complete all as specified and directed by Engineer-in-Charge.

Cleaning/clearing of IWC/ EWC, gully trap /floor trap including CI pipe / PVC pipe upto first manhole by roding, taking out all residue including waste and testing by pouring water after cleaning etc, complete all as specified and directed by Engr-in-Charge. (Note: Cleaning of PVC/CI pipe from first floor / ground floor embedded in floor or fixed to wall included in this item)

S&F in repair Cast iron oval access covers / inspection cover with bolts rubber gasket to make it water tight for 75mm/100mm bore CI fittings including taking out broken/ unserviceable cover with bolts etc and , complete all as specified and directed.

S&F SFRC manhole cover of size 1000 x 500 x 65 mm thick with angle Iron frame set in CM 1:4, complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipe etc. n exc 10 sq m on plan and getting out in any type of soil, complete all as specified and directed.

Returning, filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil, complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed and at a level not exceeding 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and and mass concreate, complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in coping, bed plates, kerbs and the like benching, including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified.

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided reinforcement cut as required to facilitate demolition, complete all as specified and directed.

Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips qfuality conforing to Gd I, IS 432(part I) or Fe-410 S or Fe- 410-o complete all as specified.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in landing cover slabs for manholes set in CM 1:4, complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using WPC (WPC to be measured and paid separately) finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

Demolition and breaking up 150mm drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar all as specified and directed by Engr in Charge.

Demolition and breaking up 200 mm drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar all as specified and directed by Engr in Charge.

M&L for concrete bed to drain pipes of bore 150mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including necessary shuttering and supports, complete all as specified and directed.

M&L for concrete bed to drain pipes of bore 200mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including necessary shuttering and supports, complete all as specified and directed.

M&L 150mm dia slat glazed stoneware drain pipes laid in tenches and jointed, complete all as specified and directed.

M&L for 200mm bore dia reinforced cement concrete pipes, class NP-2, laid and jointed complete with collars, complete all as specified and directed.

Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or 1/4 section ) in PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching for 150mm dia of pipe, complete all as specified and directed.

S&F in repairs vitreous china squatting pan 'ORRISA' pattern, size 580x440mm white, with integral foot rest including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc including making good to floor, complete all as specified and directed.

S&F in repairs Wash down water closet (Pedestal pattern) with ‘P” or “S” trap vitreous china coloured including all fittings i.e seat cover, cistern super water saver dual, flush, complete all as specified and directed.

S & F in repairs 10 Ltrs capacity PVC valveles, less symphonic action type, flushing cistern low level, white with inlet, ball valve, float and handle including bracket, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for drains etc, complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L 75 mm thick cemnt concrete 1:2:4 type B-2 (using 40 mm graded granite stone aggregate) as in base of flooring/hard standing finished even and smooth without using extra cement complete all as specified and directed

M & L for Glazed ceramic coloured printed tiles (first quality) of size 300 x 200 x 7mm/450x300x7mm thick as in vertical surface, dado/skirting, over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L chequered cemnet tiles concrete 20cm x 20cm x25mm thick set jointedin neat cemnt slurry in floor including 15 mm thick screed bed or bedding layer of CM 1:4 for laying floor finished etc complete all as specified and directed

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:6, complete all as specified and directed.

Dismantling/taking down CI/PVC/AC pipes of exc 50 mm dia with all including fitting complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor , complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) branch piece double equal or unequal, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) branch piece double equal or unequal, complete all as specified and directed.

S&F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends to wall or roof for 75mm bore pipe, complete all as specified and directed.

All as per ser item No.46 here in above but 100 mm bore pipe.

S&F in repair 125/110 mm PVC (SWR) gully trap setting and jointing with solvant cement, complete all as specified and directed

M & L for cleaning of all types of blockage of Nahni traps/floor traps/bottle traps, blockages of WC's, rain water pipes and similar works complete all as specified and directed by Engr-in-Charge. Note :- 1.Labour shall be provided by the contractor on daily basis from 9:00 AM to 5:00 PM incl all Tools & Plants and safety equipments. Each labour shall intertain complaints everyday in working hours. 2.The supervisor of Contactor shall take all complaints from the Complaint Cell and do the all on same day. 3.Futhermore, the feedback shall be given by the contractor/supervisor to concened JE from all aspect. 4. Recovery due to failing non complaince of complaint within period of 48 hrs will be made from the contractor @ 200 Rs per complaint per day

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water complete all as specified.

M&L for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work with or concrete finished even and smooth without using extra cement, complete all as specified and directed

M&L for prepartation of new plastered surfaces of walls and applying two coat of cemnt base paint overa a coat of primer complete all as specified and directed

M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed

M&L for precast cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in copping, bed plates etc of main holes includng necessary form work, complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in copping, bed plates etc of main holes includng necessary form work, complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-0(using 12.5 mm graded stone aggregate) louvers and jallies, 25mm thick (measured solid), including all moulding and set in CM 1:4, complete all as specified and directed

Mild steel work as in posts and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire , etc., including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe-290 Gde E-165 including one shop coat of red oxide primer (incl preparation of surface) complete all as specified and directed

S&F MS flat iron as in hold fast and similar small articles , cut to lingth bend to shape drilled hole and fised with screw etc conforming to Fe-410 or F-310 complete all as specified and directed

Ornamental and intricated design frame work in steel gate complte drilled welding for fixing of steel sheeting or othercovering hooks hinges or steel hanging doors fitting also fasteing and fixing complete all as specified and directed

Galvanised 2 strand steel barbed wire 2.24 mm dia with barbed , 2 mm dia bars at 75 mm spacing & straining and fixing to any type of standarad rails strining bolts including securing or tying at crossing with & provision of galvanised Mild steel wire staples or steel pins etc as directed (each line wire of wire to be measured) complete all as specified and directed

Restraining and resecuring existiong barbed wire of any type incl making good staples etc any type of standared rails straining bolts including securing or tying at crossing with and procision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured separately) Galvanised 2 strand steel barbed wire 2.24 mm dia with barbed , 2 mm dia bars at 75 mm spacing & straining and fixing to any type of standarad rails strining bolts including securing or tying at crossing with & provision of galvanised Mild steel wire staples or steel pins etc as directed (each line wire of wire to be measured) complete all as specified and directed

M&L for preparation of new steel surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified..

M&L for preparation old steel surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified.

S&F 80 cm dia concertina coil galvanished including securing tying at crossing with and procision of galvanished mild steel wire staples or steel pins etc including dismatling of existing concertina coil wire, complete all as specified and directed

Taking down and refixing of angle iron gate(3mtr to 5mtr wide and 2 mtr to 2.5 mtr high) including emedding of pintel hinges in concrete blocks and fixing locking arrangement complete all as specified and directed

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 32,450.00 during AOC Note:- Tenderers shall not quote for this Schedule

Kalsi Engineers and contractors

CHOPRA CONSTRUCTIONS