RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Water Tender Type 'X' For Fire Brigade Use ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Water tender type 'X' for Fire Brigade use Specification Generally in compliance to IS:6067 latest regarding material
Requireddesign
Requiredconstruction
Requiredworkmanship and finish
Requiredaccessories and equipment of water * 1/15 tender type 'X' for fire brigade use Scope Water tender type 'X' are used in replenishing the water of crash tender while engaged in fighting an aircraft fire so that the fire fighting operations may continue longer without interruption. These are also used in town and rural areas where there is acute shortage of water. * Water tender type 'X' for Fire Brigade The appliance shall carry 6 000 litres of water
Requireda centrifugal pump capable of delivering not less than 3 200 litres of water per minute at 0.7 MN/cm² and other accessories. The appliance shall carry 6 000 litres of water
Requireda centrifugal pump capable of delivering not less than 3 200 litres of water per minute at 0.7 MN/cm² and other accessories. Capacity 6000 6000 Cabin and Chassis Chassis Suitable to carry minimum 15000 MT GVW
Required4 x2.Engine fitted on the chassis shall comply with the respective normes in force at the time of delivery of chassis. Suitable to carry minimum 15000 MT GVW
Required4 x2.Engine fitted on the chassis shall comply with the respective normes in force at the time of delivery of chassis. Make of Chassis TATA MOTORS * Chassis Model Number LPT 1613 * Vehicle Emission Compliance BS-IV * Engine Type 6 cylinder
Requiredinline
Required4 stroke
RequiredLiquid cooled
RequiredTu rbocharged
Requiredinter cooled
Requireddiesel engine developing not less then 150 bhp * Clutch Single plate dry friction type hydraulically actuated * Gear Box Synchromess gear box having 6 forward and one reverse gear * Type of Front Axle and Suspension System Heavy duty forged I beam
Requiredsemi elliptical leaf spring suspension * 2/15 with hydraulic double acting shock absorbers Type of Rear Axle and Suspension System Single reduction
Requiredhypoid gears
Requiredfully floating axle shaft with semi elliptical leaf spring suspension * Type of Steering Integral hydraulic power assisted steering * Brakes Parking Duel circuit fully air braking system with pneumatically operated brakes on rear wheels * Chassis Frame Type Ladder type heavy duty frame with riveted or bolted cross members * Wheels and Tyres of 16 PR including spare wheel 7 * Fuel Tank Capacity 225 * Electrical System 12/24 volt with 120 AH Battery with Alternator * Cowl Standard Cowl duly painted in Red color with instrument cluster
Requiredrear view mirrors
Requiredwiper system
RequiredOriginal driver seat
Requiredsafety belts * Gross vehicle mass including crew
Requiredwater and equipment 16200 Above 16000 Safety Features Anti Lock Braking system(ABS) * Pump Pump Type Centrifugal pump either single or multi-stage type. Anti friction bearings
Requiredexternal to the casing
Requiredbe provided so as to avoid any bearings within the pump casing. A drain cock plug shall be provided at the bottom of the casing.In ease light alloy castings are used
Requiredthese shall be of die-cast and without any blow holes
Requiredinternal cracks
Requiredetc.In ease light Centrifugal pump either single or multi-stage type. Anti friction bearings
Requiredexternal to the casing
Requiredbe provided so as to avoid any bearings within the pump casing. A drain cock plug shall be provided at the bottom of the casing.In ease light alloy castings are used
Requiredthese shall be of die-cast and without any blow holes
Requiredinternal cracks
Requiredetc.In ease light 3/15 alloy castings are used
Requiredthese shall be of die- cast and without any blow holes
Requiredinternal cracks
Requiredetc.The pump shall be preferably completely covered. However
Requiredall the controls on the panel and the gauges shall be uncovered. alloy castings are used
Requiredthese shall be of die- cast and without any blow holes
Requiredinternal cracks
Requiredetc.The pump shall be preferably completely covered. However
Requiredall the controls on the panel and the gauges shall be uncovered. Normal Pressure output Performance at 7 Kgf/cm² when working through two nos 2500 mm length of specified suction hose 3200 liter/min at 3 meter lift * Normal Pressure output Performance at 7 Kgf/cm² when working through Four nos 2500 mm length of specified suction hose 1200 liter/min at 7 meter lift * Normal Pressure output Performance when working through two 2500 mm length of specified suction hose 2250 litre/min at 8.8 kgf/cm² at 3 meter lift * Pump casing and impeller material Lead tin bronze (Grade LTB 2 of IS 318) * Impeller ring and impeller neck ring material Lead tin bronze (Grade LTB 2 of IS 318) for lead tin bronze pump * Pump shaft material Stainless steel (Grade 04Cr18Ni10 of IS 6603) * Material for all parts which form water ways or come into contact with water Stainless steel * Normal pressure impeller Dynamically balanced * Self adjesting mechanical seal with interface plate suitable to withstand dry run of pump upto 2 minutes without any damage Yes * A control lever for engaging and disengaging the pump
Requiredwith suitable locking devices shall be Yes * 4/15 provided in the driver's cab Pump Efficiency(Power and RPM required shall be less than available with engine) (%) 60 * Pump RPM Pressure Throttle Control Panel Manual Throttle Manual Throttle
RequiredElectronic Canbus TFT LCD Display Throttle
RequiredElectronic Canbus Segment Display Throttle Mounting of Pump Rear of the appliance
Requiredcoupled to the prime- mover of the chassis through a power take off * Primer Heavy duty type Power Take Off (PTO) suitable to transmitting full Torque of engine to 1st gear Yes * Lever for engaging shall be provided in Driver cabin with proper locking arrangements Yes * Mounting of PTO on heavy duty cross members and support brackets between longitudional member of the chassis frame * Provision to check oil level and drain plug at bottom Yes * Cooling of PTO A cooling coil made of copper shall be provided in side the PTO at the bottom to prevent the oil of the PTO from heating. * Water Tank Water Tank Construction In case of rear mounted pump
Requiredsingle tank of 6000 Liter * Water Tank Making The tanker(s) of required capacity suitably baffled to prevent surge constructed out of mild steel
Requiredtreated for anti- corrosion shall be suitably mounted on * 5/15 the chassis in a manner keeping in view the proper load distribution on the axles. Water Tank baffles The tank shall be suitably baffled with minimum 2 nos of baffels fitted longitudinally and two nos baffels fitted transversly to prevent surge when the vehicle is braking
Requiredcornering or accelerating. The baffles shall be arranged in a manner to facilitate the passage of a man throughout the tank for cleaning purposes. * The tank body and baffles shall be minimum of 3 mm thick sheet except bottom which shall be 4 mm thick Yes * Lifting eyes for repaire or replacement at suitable places on tank Yes * Water Tank Fitments The tank shall befitted with a 50 mm bore overflow pipe . A 63 mm instantaneous hydrant connection
Requiredincorporating a strainer with NRV
Requiredclose to the pump control shall be provided for filling the tank through 75 mm bore pipe . An 100 mm bore pipeline shall be taken from the tank to the suction inlet of the pump incorporating an 100 mm quick butterfly type valve. Drain valve shall be at the bottom of tank. * Anti Corrosive Treatment The tank shall be given adequate anti-corrosive treatment from inside after fabrication if it is not galvanized. Inside surface shall be prepared by sand * 6/15 blasting before painting. Epoxy treatment should be given inside the water tank for corrosion resistance. Epoxy treatment shall consist of one coat of primer with 2 coats of finish. The tank with its fitments shall withstand hydrostatic pressure of 0.3 bar. Water level indicator for the tank Visual level gauge of glass tube shall be provided at the control panel calibrated 1/4
Required1/2
Required3/4 and full preferably calibrated in liters also * Covered main hole Diameter (minimum) 450 mm dia bolted main hole for filling water on Top.Main hole cover shall be made of 3.15 mm * Diameter of cleaning hole at bottom of Tank(minimum) 250 * Tank connection with pump
Requiredhose reel and valve The tank shall be connected to with the pump
Requiredhose reel and valves in such a way thay any function such as Hydrant - Tank
RequiredHydrant - reel
RequiredTank - pump - reel
RequiredHydrant Pump - reel and OFF * Hose Reel One hose reel shall be provided at the rear of the appliance with 60 m long of 20 mnl bore hose connected by screw 'C' type quick release couplings and terrrlinating with a 8 mm shut off' nozzle having 8 mm nozzle. The reel may be fitted with friction
Requiredbrakes and locking device * Body Work & stowage Body Work Enclosed accommodation for driver
Requiredofficer in charge & four crew members * 7/15 would be provided in a double compartment drivers cab. For this the original cabin of the chassis shall be extended & the tilting mechanism suitably reinforced. The floor of crew cabin shall be provided with 3.0mm thick aluminium chequered plates.First aid box shall also be provided.Mudguard arches to be covered with 1.60 mm Aluminium chequered plate. Seating Two front seats
Requiredone for officer and one for driver shall be provided in the cabin. One seat for 4 to 5 Crew members shall be provided behind the officer and driver seats. The seats shall be of good quality and latest design (bucket type) seats with 100 mm thick cushions. Also good quality removable and washable seat covers shall be provided * Cabin Structure The entire structure of appliance including that of drivers cabin would be welded structure made of 14/16 SWG SS pressed section
Requiredsquare tubes
Requiredangles and channels with aluminium paneling. * Cabin Doors four doors (2 each side). The door shall open outwards. Cabin doors shall be provided with splinter proof safety glasses and shall also be provided with their movement mechanism. * First aid box made of Yes * 8/15 fibre glass shall be provided and fitted in the cabin at suitable location for 10 persons & contents as per The Factories Act Non-slip type steps and rails shall be provided in the cabin to assist the crew members to get in and out Yes * The crew cabin structure shall be so designed so as to avoid any vibration/rattling/d eformation in the intended usage of vehicle Yes * Two numbers of large sun visors and rear view mirrors shall be provided on each sides Yes * Cabin shall have one roof light and two sidelights Yes * The cabin & lockers shall be composite construction with sufficient rigidity
Requiredreinforcement & will be kept as light as possible Pressed sections of sufficient strength will be used Yes * Lockers to secure stowage of all equipment's Adequate Nos. of lockers shall be provided for stowage of all equipment. The height of the lockers from the bottom to the top of opening shall be not less than 600 mm & the depth not less than 600 mm. Flooring of lockers should be of aluminum 3 mm chequered sheet . The exact size of lockers will be designed and installed for accommodating equipment and accessories. * 9/15 Stowage Safety All the compartments for stowage of equipments shall be covered with Aluminium Roller Shutters. These smooth operating shutters shall be made of extruded aluminium profiles duly powder coated. The shutter doors shall be equipped with electro- magnetic switch on the door tracks to provide automatic switch on/off of compartment lights. All the space on sides of the vehicle
Requiredbelow the chassis frame level shall be utilized for stowing equipments and shall be covered with rollers shutters. * Hose Tunnels Hose tunnels shall be provided to carry four 2.5 Meter lengths of suction hoses on convenient location. Drain holes will be provided preferably at the bottom of the tunnel & hose stowage compartment. The internal paneling of suction hose tunnel should be plain aluminum sheet of 16 gauge thickness & the floor of 3 mm thickness. * Ladder Gallows Gallows shall be provided to carry a 10.5 m aluminium extrasion ladder. The design shall be such that the ladder can be released without difficulty from a reasonably accessible position and shall embody rollers to permit easy withdrawal by one man. Means shall also be provided for locking the ladder when stowed * 10/15 Accessories Head Lamps 2 * Fog Lamps 2 * Reversing Lights a lamp suitably situated to assist reversing. * Multicolour Red- White-Blue LED light Bar situated on the head of the driving compartment as per CMVR Yes
RequiredSAE Class 1 Type Yes
RequiredYes
RequiredSAE Class 1 Type Warning Lights Yes
Requiredmulticolored Warning Lights No
RequiredYes
Requiredmulticolored Warning Lights
RequiredYes
Requiredmulticoloured Warning Lights with in-built Scene Lighting Trafficators - Illuminated with indicating light on instrument panel or in any other prominent position in driving compartment Yes * Wild Screen Wipers Yes * All tools required for normal routine maintenance of the appliance which are not included in the kit for the chassis Yes * Siren Battery operated Yes * Search Light adjustable to given flood or beam light
Requiredmounted in a convenient position but capable of being readily disconnected and mounted on a tripod away from the appliance
Requiredcomplete with tripod and with not less than 30 m of TRS cable on a reel mounted on the appliance * Spot Light - adjustable
Requiredmounted in a convenient position on the rear side of the driving compartment Yes * Inspection Lamp - Yes * 11/15 protected type on wander lead with plug A socket shall be provided in the control panel in the driver's cab for plugging in the lamp Tail Lamps - two of combined stop and tail Yes * Rear Reflectors Yes * Cab
Requiredinstrument panel and locker
Requiredlight Yes * Airfield obstruction marking lights Two such lights shall be mounted. Out of these
Requiredone shall be in front and the other at the rear. When switched 'ON' these lights shall be visible from all angles
Requiredin the air and from a distance of 6 m from the appliance On the ground. Revolving beacon ray type of lights shall be preferred. * VHF radio telephone A battery operated crystal controller mobile VHF radio telephone with a choice of two frequencies shall be installed on the appliance. * Public Address System - battery operated system with mike in the driver's cab and speaker on the top bf the vehicle Yes * The entire appliance shall be painted fire red on the outside The company name shall be written onboth sides with yellow colour and before final painting of fire tender two coats of anti corrosion and primer coat shall be applied Yes * Performance Maximum speed on level road (fully laden) (km/hr) 75 * 12/15 Acceleration from a standing start through the gears ( fully laden) 50 km/h in 55 seconds * Capability of fire tender of being started from rest and move upon a gradient of 1 to 4 Yes * Performance of Brakes When travelling at 48 km/h on a level dry surface the foot brake shall be capable of stopping the vehicle within a distance of 15 m from the point at which the brake is applied. The hand brake shall be capable of holding the fully laden appliances on a dry surface gradient of 1 in 4 when in neutral gear. * Stability of complete Fire tender The stability of the appliance shall be such that when under fully equipped and loaded condition ( but excluding crew)
Requiredif the surface on whicel the appliance stand is tilted to either side
Requiredthe point at which over-turning occurs is not passed at an angle of 30 degrees from the horizontal. * Certification Manufacturer's name or trade-mark on Fire Tender Yes * Marking for Capacity of the water tank in Liters on fire Tender Yes * Marking for Year of Manufacture on Water Tender Yes * Warranty Time 12 Any applicable numeric value Warranty Distance 10000 Any applicable numeric value Battery Warranty 12 Any applicable numeric value Numbers of Free Service 3 Any applicable numeric value 13/15 Transportation Charge in Rupees Per Km 23 * Complete Fire Tender including Chassis
RequiredPTO and Body approval from ARAI/VRDE/ICAT No Yes
RequiredNo Chassis Certification including form 22 A from ARAI/VRDE ICAT Yes * * Bold specifications are the golden parameters.
