Procurement of different RTD and Thermocouple with pad

Duplex RTD Pt-100, Spring Loaded, Range - Up to 200 deg. C, Sheath- 8mm OD, 400 mm Long, Connection- 0.5 inch BSP, MOC- SS304, Length- 10 mtr, Special Teflon Coated Steel Braided Eight wire

THRUST PAD OF TDBFP and MDBFP RTD, Element- Pt-100X2, Type- Duplex, 3 wire Duplex, Cable- Total length including wire- 4 meters, PTFE insulated lead wire, Bearing babbit temperature measurement, Oil resistant epoxy sealing, Crimp on pot, Adjustable connector, Element length- 12 mm, Element Dia- 3 mm, SS Braided Armour- 30 mm, 150 mm length after adjustable connector including braided armour and Element. Standard- DIN 43760, IEC 751, DIN Standard 60751, ASTM E 1137, Material- SS-316

BFP THRUST BRG RTD, Element- Pt-100, Type- Duplex ,4 wire, PTFE insulated lead wire, Total length including wire -4 meters, Element length-12 mm, Element Dia - 3 mm, 690 mm length after feed through tube including braid armour and element, Feed through tube, length- 60 mm, Dia- 4 mm, Oil resistant epoxy sealing, Material- SS-314, Insulation- Mineral Insulated with Comp. Mgo, Standard- DIN 43760, IEC 751, DIN Standard 60751, ASTM E 1137

CW PP THRUST BRG RTD, Element- Pt-100x2, Type- Duplex, 3 Wire, Head- Die Cast Alu., Weatherproof IP-67 Terminal and Ceramic Block, Cable Entry- 0.5 inch Npt With Cable Gland, Insulation- Mineral Insulated, Sheath Material- SS-316, Sheath Dia- 4.5 mm, Mtg- 0.5 inch Npt Adj. Comp.Ferrule Fitting, Sheath Length- 280 mm Below Head. Standard- DIN 43760, IEC 751, DIN Standard 60751, ASTM E 1137

RJB JOURNAL BRG RTD OF TDBFP, Element- Pt-100x2, Type- Duplex, 3 Wires, Cable- 5 Mtr. Long Fep OR Fep Insulated and Overall Ss Braided Flexible Cable with Sealpot- 40 mm, Spring- 130 mm and Clamp With 2 Nos. O Washer 8 mm x 2 mm With U-Type Lugs, Material- SS-316, Dia-3 mm, Length- 20 mm, Standard- DIN 43760, IEC 751, DIN Standard 60751, ASTM E 1137

ID FAN BRG RTD, Standard- DIN 43760, IEC 751, DIN Standard 60751, ASTM E 1137

COLD GAS and HOT GAS RTD, Standard- DIN 43760, IEC 751, DIN Standard 60751, ASTM E 1137

CEP THRUST BEARING RTD, Standard- DIN 43760, IEC 751, DIN Standard 60751, ASTM E 1137

OIL TANK RTD OF OIL STATION

MTM THERMOCOUPLE OF 20 M, Standards- ASTM E230 E230M-17, ASTM E1350-18, ASTM E220-19, ASTM E2846-20, ASTM E1652-15, IEC 60584-1 Ed. 3.0 b-2013 or equivalent.