Periodical services and B/R repair in Tawi, Jib and B reservoir area Water Supply installations and Certain B/R repair to Misc works under GE Utilities Udhampur

Amount

Taking down cement plaster on brick or concrete surface etc including raking out joints hacking for key and scrubbing with water etc complete all as specified and directed by Engr-in-Charge.

M & L rendeing 15mm thick cement plaster on fair faces of brick or concrete surface in CM 1:6 and and finishing the surface even and fair complete all as specified and directed by Engr-in-Charge.

M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L rendeing 15mm thick cement plaster on fair faces of brick or concrete surface in CM 1:4 and and finishing the surface even and fair complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of cement base paint, white or tinted over a coat of primer on new wall surface including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of cement base paint, white or tinted on old wall surface including preparation of surfaces upto 15m height complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior weather proof paint over a one coat of primer upto15m height complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of wall and applying one coats of exterior weather proof paint over a one coat of primer upto15m height complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered or unplastered surface and apply one coat of white wash on ceiling surface etc complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment on old decorated wall/vertical surfaces by means of washing/rubbing/scurbbing down to receive the primer and applying two coats of distemper oil emulsion white or tinted (as apprved) over a coat of primer of alkali resistant paint including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of white wash on old wall surface including preparation of surface upto15m height complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden surface of any description over 10 cm width or girth not otherwise described for and apply one coats of synthetic enamel paint etc complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars but excluding ashlar facing dressed stone and removing the rubbish out side MD land complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cemetn mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) but except bricks complete all as specified and directed by Engr-in-Charge.

M&L walling of random rubble masonary uncoursed well bonded bedded and solidly hearted built in CM 1:4 at back side as work proceed complete all as specified and directed by Engr-in-Charge.

Description all as per serial item No 16 here-in-before but except stone complete all as specified and directed by Engr-in-Charge.

M&L for flush pointing to stone masonary wall in cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in bonders for stone walling set in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 Type B1 (20mm graded crushed stone aggregate) as in coping, steps, seismic and other similar bands, plinth courses, kneelers, apex stones, bed plate, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

M & L Flat Iron for band strap support of stay, wall tie, hold fast, wind tie or similar works etc complete.

S & F M S chequered plate for duct cover cut square/rectangular or notched (ordinary of counter sunk) forming holes without any attachment of Fe-410-W Gde-250 complete all as specifed and directed.

S & F steel work in roof trusses (framed), truss, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, agnle channel or flat sections including distance pieces, cleats etc. confirming to Fe -410 grade-250 B complete all as specified and directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge.

M & L for Galvanised, corrugated mild steel sheeting 0.63mm thickness with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washer in roofs, walls etc. With grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

M & L for Plain galvanised, mild steel sheeting 0.63mm thickness, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

S&F expanded metal exc 4.00 Kg per sqm cut to length, bent to shape and welded with MS angle iron frame complete all as specified and directed by Engr-in-Charge.

S&F framed MS work as in grills, gratings, etc.. with ends of bars shouldered and/or riveted, similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement corrugated, semicorrugated, sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

Except sheet 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type of cranked hook bolts complete all as specified and directed by Engr-in-Charge.

M&L Asbestos cement one piece plain angular ridge 6mm thick Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat with shutter exc 1.5 Sqm but not exceeding 4 sqm each with shutter,without taking down shutters from the chowkhat etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat with shutter not exc 1.5 Sqm each with shutter,without taking down shutters from the chowkhat etc complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and directed by Engr-in-Charge.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etcsize 105 x 60mm complete all as specified and directed by Engr-in-Charge.

S&F factory made plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S& F aluminium Butt hinges 100 mm size with extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed type B-21 complete all as specified and directed by Engr-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed by Engr-in-Charge.

S&F steel window made up of box steel section of 16 gauge ms sheet of outer frame, shutter frame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shown in drg consisting with two nos pintol hinges 100mm long, two nos stove enemaled tower bolts 150mm long, and one no steel handle, dovetailed or welded each panelan complete with necessary cleats and stopers complete all as specified and directed by Engr-in-Charge.

S&F steel ventilator made up of box steel section of 16 gauge ms sheet frame fixed type and partly glazed, partly gauged complete all as specified and directed by Engr-in-Charge. (MS gaurd bar/grill work will be measured and paid separately)

S&F plain sheet glass 4.00 mm thick ordinary quality n.exc 0.5 sqm in each pane and glazing with oil putty or fixed with beads complete all as specified and directed by Engr-in-Charge.

S&F galvanished MS wire cloth 0.56 mm nominal dia wire and avg width of aperture 1.18 mm with tinned tacks or galvanished wire staple complete all as specified and directed by Engr-in-Charge.

S&F Chimney bars (straight or camber); bearing bars; ton-gues or water bars for window frames; window guard bars, plain let in & fixed independently in wooden frames L or T section support for shelves etc & similar articles conforming to Fe 290-0 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint on steel surfaces over a coat of red oxide of any description, not otherwise, described, over 10cm width or girth including preparation of new surface complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of synthetic enamel paint on old steel surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description not otherwise described not exc 10 cm width and girth applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engr-in-Charge.

S&F figured glass pin hard type 3.0 mm thick & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed by Engr-in-Charge.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed by Engr-in-Charge.

Taking down PVC (SWR) pipe 110 mm dia fixed in any position complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed by Engr-in-Charge.

Demolition of stone slabs & tiles including cement mortar beddig(but not backing) of any description or thickness in floors, aprons, etc, laid, bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge.

M & L for Machine cut kota stone slab flooring 18-20mm thick over 15mm thick screed bed in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and as directed by Engr-in-Charge.

M & L for kota stone slab flooring 18-20mm thick in riser of steps, skirting, dado & pillar over 10mm thick plaster in CM (1:3) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and as directed by Engr-in-Charge.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for coloured Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including screed bed or bedding layer of mortar (1:4) 15 mm thick complete all as specified and directed by Engr-in-Charge.

M&L for coloured Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in vertical surfaces such as skirting/dado and riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10mm thick rendering of mortar (1:3) complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick CM 1:3 complete all as specified and directed by Engr-in-Charge.

Taking up or down 15 mm bore GI tubing , fittings and connection and removing from site complete all as specified and directed by Engr-in-Charge.

Taking up or down 20 mm bore GI tubing , fittings and connection and removing from site complete all as specified and directed by Engr-in-Charge.

S&F 15 mm dia GI tubing medium grade inlcuding necessary fittings such as elbow tees cap plugs short pieces unions etc fixed to walls, floors, ceiling complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia GI tubing medium grade inlcuding necessary fittings such as elbow tees cap plugs short pieces unions etc fixed to walls, floors, ceiling complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed by Engr-in-Charge.

Supply only flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern/urinal complete all as specified and directed by Engr-in-Charge.

S&F in repair waste pipe PVC 32mm bore 750mm for wash hand basin fixed in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP brass bib tap fancy type with crutch or butterfly handle screwed down screwed for iron pipes or brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore pillar taps , cast copper alloy fancy type with capstan heads chromium plated ,screwed down high pressure with or without lettered hot or cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge. (fancy type).

S&F in repairs 15 mm bore stop valve/angle valve, cast copper alloy with capstan heads chromium plated ,screwed down high pressure with or without lettered hot or cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge. (fancy type)

S&F in repair PVC valve less syphmic action type flushing cistern low level,10 ltr capacity white or coloured with inlet, ball valve, float &handle incl brackets & PVC flush pipe 32 mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china WHB white flat back size 550 x 400 mm including brackets, 32 mm dia waste fittings brass CP for WHB & CP pillar tap etc with long shank screwed and fly nuts , flags and bedded in red lead cement and outer end fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.

S&F in repais PVC tank covers suitable for tanks 500 & 1000 litres tanks including fixing locking brackets/threaded complete all as specified and directed by Engr-in-Charge.

S&F in repair 125 mm dia CP grating with or wirhout hole over nahani/floor trap including embedding the same in white/coloured cement to match complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks exc 250 ltr and n. exc 500 ltr and removal from site complete all as specified and directed by Engr-in-Charge.

S&F 500 litres capacity Rotational moulded polyethylene water storage triple layer tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each), fittings complete all as specified and directed by Engr-in-Charge. Make of tank:- Sintex/Rotex/Polywell

Dismantling water tanks exc 500 ltr and n. exc 1000 ltr and removal from site complete all as specified and directed by Engr-in-Charge.

S&F 1000 litres capacity Rotational moulded polyethylene water storage triple layer tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve complete with union (Two Nos each), fittings complete all as specified and directed by Engr-in-Charge. Make of tank:- Sintex/Rotex/Polywell

M&L uprooting of plants (girth n.exc 15 cm of trunk to any type of plants 100 ml grown along the pipes or walls chajjas, parapets and roof of building (incl multistoried) and making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth complete all as specified and directed by Engr-in-Charge.

Taking down steel rolling shutters gear operated type with ball bearing cover hood and channel, anchoring rod etc of size upto 25 sqm each complete all as specified and directed by Engr-in-Charge.

M&L for Steel rolling shutters 1.25mm thick without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; but gear operated type with bevel gear box and crank handle erected in position as indicated complete all as specified and directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engr-in-Charge.

S&F Ball bearing for rolling shutters as per existing complete all as specified and directed by Engr-in-Charge.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness below or above ground level,unreinforced and removing the rubbish out side MD land complete all as specified and directed by Engr-in-Charge.

M & L for Machine pressed precast concrete interlocking pavor block 50% grey and 50% coloured any shape and size confirming to IS 15658-2006 of 60mm thicknes, M-35 over and including 75mm thick PCC Type D-2, (1:4:8) and 25mm thick sand cushion complete all as specified and directed by Engr-in-Charge.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-in-Charge.

M&L for brushing neat cement slurry with 3.00kg of cement per sq.metre complete all as specified and directed by Engr-in-Charge.

M&L colured Chequered cement concrete tiles 25 cm x 25 cm x 22 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M & L for 50mm thick PCC 1:3:6 type C-1 (20mm graded crushed stone aggregate) and plinth protection finished even and smooth with using extra cement complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-1 (20mm graded cruched stone aggregate) for floor finished even and smooth with using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for glass deviding strips 3mm thick and width of strip 38mm complete all as specified and directed by Engr-in-Charge.

M & L for loose filling with aggregates of gauge 40mm to 80mm complete all as specified and directed.

Demolition of PCC of any description and in any position not specialy provided for, unreinforced and removing the rubbish out side MD land complete all as specified and directed by Engr-in-Charge.

Broken glass coping on top of walls in cement mortar 1:3 including taking off remaining rubbish complete all as specified.

Dismantling post or struts (wood, steel or RCC) any position, including taking out embeded portion,concrete, brick work, masonary etc and making good disturbed ground complete all as specified and directed by Engr-in-Charge.

Dismantling fencing wire, chain link, mesh fencing or any type and any position etc complete all as specified and directed by Engr-in-Charge.

Dismantling barbed wire of any description complete all as specified and directed by Engr-in-Charge.

M&L for hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for door,balusters, noising to steps including embedding in concrete and screweing etc wind ties including securing bolts post and struts in fencing drilling holes,notching for wire etc flat iron fillets including necessary drilling, bolting and reveting etc or similar works complete all as specified and directed by Engr-in-Charge.

M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed by Engr-in-Charge. (each line wire to be measured).

Restraining resecuring existing galvanised barbed wire as in fencing, including making good staples etc complete all as specified and directed by Engr-in-Charge.

M&L Mild Steel round bars Fe-410-W (Gde E-250) quality-A or Fe 290 (Gde E-165) for securing chain link fencing complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed by Engr-in-Charge.

M&L for Mild Steel nuts and bolts of size 12mm dia bolt exc 5cm but not exc 10cm long etc and dia of neck 10mm complete all as specified and directed by Engr-in-Charge.

S&F chain link fencing 4mm dia bar and mesh size 100x100mm complete including line wires of any mesh size and to any type of standards rails,straining bolts etc including provisioning of binding wire complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type C1 (using 20mm graded stone aggregate) as in cills, angle post, bed plates, plinth courses, string courses etc complete all as specified and directed by Engr-in-Charge.

Taking down concetina coil 1000mm dia laid over Y shape angle irom complete all as directed by Engr-in-Charge.

Taking down concetina coil 600mm dia laid over Y shape angle irom complete all as directed by Engr-in-Charge.

S&F short barb concertina coil SG hot galvanised spring tensile wire UTS 145 to 150kg/Sqm and dia of coil when stretched 1050 mm having (50 turn per coil) and minimum weight of coil 15 kg/coil + 5% and maximum expendable length 14-15 metre hot dip galvanised, barb length 11mm + 1mm and pitch between two barbs is 24mm + 0.5mm, thickness of tape 0.5mm and dia of spring core wire is 2.6mm complete all as specified and as directed. Make:- (i) M/s Special steel Limited (ii) M/s Super Fence (iii) Global Engr or other equivalent make as approved by GE.

S&F short barb concertina coil SG hot galvanised spring tensile wire UTS 145 to 150kg/Sqm and dia of coil when stretched 610mm having (50 turn per coil) and minimum weight of coil 8 kg/coil + 5% and maximum expendable length 6-8 metre hot dip galvanised, barb length 11mm + 1mm and pitch between two barbs is 24mm + 0.5mm, thickness of tape 0.5mm and dia of spring core wire is 2.6mm complete all as specified and as directed. Make:- (i) M/s Special steel Limited (ii) M/s Super Fence (iii) Global Engr or other equivalent make as approved by GE.

Dewatering of septic tank /soakage well of any depth and description by manual or with sewage pump and sewage tanker after pluging of incoming sewage line and throwing water into non residential area or in drain/nallah all as specified and directed by Engr-in-Charge.

Cleaning of manholes, septic tanks of any depth and description including inlet and outlet chambers, removing the waste material outside the defence land, complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, not exceeding 1.5m wide and not exc 1.5m in depth for foundation and getting out in any type of soil, complete all as specified and directed by Engr-in-Charge.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil, complete all as specified and as directed by Engr-in-Charge

Removal of excavated materials (soil) to a distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed by Engr-in-Charge.

Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar for 150mm dia pipes, complete all as specified and directed by Engr-in-Charge.

M & L for PCC bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete (Nominal mix) Type D2 1:4:8 (using 20mm crushed stone aggregates) for 150mm bore pipes, complete all as specified and directed.

M & L for salt glazed stone ware drain pipe of 150mm bore (internal bore) grade 'A' laid in trenches and jointed, complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr-in- Charge..

M & L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channel and drain complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided complete all as specified and directed by Engr-in-Charge.

M&L for precast reinforced cement concrete niminal mix type B-1 1:2:4 (using 20mm graded crushed stone aggregates ) as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wite (annealed) not less than 0.9mm dia, complete all as specified and directed by Engr- in-Charge.

RAMAN CONSTRUCTION CO