SPECIAL REPAIRS TO CERTAIN OTM BUILDING NO (P-92), P-5, P-6, P-7 AND P-10 AT INS KUNJALI UNDER GE (NW) KUNJALI, COLABA, MUMBAI

Amount

Dismantling single layer mangalore pattern or similar tiles in roofing laid dry complete all as specified and directed by Engr-in-charge

Ditto all as per item No 1.00 above but bedded in cement mortar complete all as specified and directed by Engr-in-charge

Dismantling of tile battens of any size incl fillets spacing exc 15 cm complete all as specified and directed by Engr-in-charge

Dismantling of unframed timber scantling 40sqcm and over in section in any position complete all as specified and directed by Engr-in-charge

Dismantling of unframed timber scantling under 40sqcm in section in any position all as specified.

Dismantling boarding of any description, fixed in any postion with nails complete all as specified and directed by Engr-in-charge

Material and labour for second class hard wood timber scantling clean sawn unframed complete all as specified and directed by Engr-in-charge

Ditto all as per item No 7.00 above but except timber complete all as specified and directed by Engr-in-charge

Supply and Fixing 2nd class hard wood plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 sqcm but n.exc 25 sqcm fixed with nails complete all as specified and directed by Engr-in-charge

Ditto all as per item No 9.00 above but except fillets complete all as specified and directed by Engr-in-charge

Material and labour for 2nd class hard wood battens for tiles etc clean sawn sectional area exc 15 sqcm and n.exc 25 sqcm and spacing of 30 cm centres complete all as specified and directed by Engr-in-charge

Ditto all as per item No 11.00 above but fixing only complete all as specified and directed by Engr-in-charge

Material and labour for roof tiles, Mangalore pattern , interlocking at side joints laid dry complete all as specified and directed by Engr-in-charge

Ditto all as per item No 13.00 above but except roof tiles complete all as specified and directed by Engr-in-charge

Material and labour for ridge tiles mangalore pattern bedded and jointed in cement mortar 1:6 complete all as specified and directed by Engr-in-charge

Supply and Fixing for 2nd class hard wood boarding 25 mm thick planed one side with butt joints and fixed with nails in any position complete all as specified and directed by Engr-in-charge

Material and labour for preparing the surfaces of tiles battens new or old of any size and spacing and applying two coats of creosote oil complete all as specified and directed by Engr-in-charge (measured over all one side only, spaces not deducted).

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-charge

Supply and Fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed by Engr-in-charge

Supply and Fixing 0.63mm thick plain galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length nd girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers complete all as specified and directed by Engr-in-charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge

Material and labour for rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates conforming to grade Fe 290 (Gde-E-165) incl one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified and directed by Engr-in-charge

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and directed by Engr-in-charge

Material and labour for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge

Material and labour stone walling of random rubble, uncoursed brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed by Engr-in-charge

Ditto all as per item No 25.00 above but except stone complete all as specified and directed by Engr-in-charge

Material and labour for flush pointing in CM 1:3 to random rubble masonry, uncoursed or brought upto courses complete all as specified and directed by Engr-in-charge

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and directed by Engr-in-charge

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed by Engr-in-charge

Material and labour 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge

Material and labour for machine cut kota stone slab flooring 18 to 20 mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl making 02 Nos grooves in steps over & incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr-in-charge

Material and labour for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engr-in-charge

Material and labour Plastering 15mm thick in CM 1:6 on brick surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

Material and labour Plastering 5mm thick in CM 1:3 on concrete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and directed by Engr-in-charge

Material and labour for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed by Engr-in-charge. (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and directed by Engr-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MoD land complete all as specified and directed by Engr-in-charge

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge

Material and labour for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs, water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge.

Material and labour for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in sub base complete all as specified and directed by Engr-in-charge

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-charge

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-charge

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all as specified and directed by Engr-in-charge

Taking down shutters of any description n.exc 1.00 Sqm each complete all as specified and directed by Engr-in-charge

Supply and Fixing 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-charge

Supply and Fixing 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003( Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge

Supply and Fixing factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and directed by Engr-in-charge

Supply and Fixing 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge

Supply and Fixing 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkhats of Second class hard wood complete all as specified and directed by Engr-in-charge

Supply and Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification and drawings in SSR Pt- II complete all as specified and directed by Engr-in-charge

Supply and Fixing factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed by Engr-in-charge

Supply and Fixing powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partition/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete including all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc complete all as specified and directed by Engr-in-charge

Supply and Fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed by Engr-in-charge

Supply and Fixing 3mm thick sheet glass Ordinary quality and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge

Supply and Fixing aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc complete all as specified and directed by Engr-in-charge

Supply and Fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed by Engr-in-charge

Supply and Fixing for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed by Engr-in-charge

Supply and Fixing for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed by Engr-in-charge

Supply and Fixing 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed by Engr-in-charge

Supply and Fixing 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed by Engr-in-charge

Supply and Fixing butt hinges 100 mm mild steel hinges medium weight and fixed complete all as specified and directed by Engr-in-charge

Supply and Fixing butt hinges 75 mm mild steel hinges medium weight and fixed complete all as specified and directed by Engr-in-charge

Material and labour for MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0 complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engr-in-charge

Dismantling cast iron or reinforced concrete drain pipes of dia upto 100 mm jointed in cement mortar fixed to wall of high rise buildings and taking out from trenches as required complete all as specified and directed by Engr-in-charge

Supply and Fixing 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with MS clamps complete all as specified and directed by Engr-in-charge

Supply and Fixing 75 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with MS clamps complete all as specified and directed by Engr-in-charge

Supply and Fixing 50 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in floors complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs CI Bends100 mm bore (any radius), diminishing pieces or tapers ( larger bore measured) complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs CI Bends 75 mm bore ( any radius), diminishing pieces or tapers ( larger bore measured) complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs Cast iron nahani trap with grating including jointing to waste pipe run lead 100 mm complete all as specified and directed by Engr-in-charge

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed by Engr-in-charge

Supply and Fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-charge

Supply and Fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-charge

Supply and Fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-charge

Supply and Fixing 75 mmbore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-charge

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all as specified and directed by Engr-in-charge

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore complete all as specified and directed by Engr-in-charge

Supply and Fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-charge

Supply and fixing cast iron 'P' trap 100mm dia complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs fancy type angle valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle complete all as specified and directed by Engr-in-charge

Supply and Fixing in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified and directed by Engr-in-charge

Supply and Fixing PVC bathroom cabinet with 4mm thick looking mirror of overall size 450 x 300 x 120 mm of approved tint and pattern and drilling in and fixing with 02 Nos. chromium plated screws complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-charge

Supply and Fixing vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified and directed by Engineer-in-Charge

Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs complete all as specified and directed by Engr-in-charge

Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs complete all as specified and directed by Engr-in-charge

Supply and Fixing rotational moulded polythylene water storage tank of 500 ltr capacity (Cylindrical vertical with closed top) hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for in iron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I complete all as specified and directed by Engr-in-charge

Supply and Fixing rotational moulded polythylene water storage tank of 1000 ltr capacity (Cylindrical vertical with closed top) hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for in iron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I complete all as specified and directed by Engr-in-charge

Material and labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg) as in surface channels and drains complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs Corner glass shelf with brackets complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed by Engr-in-charge

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered plastered surfaces of ceiling surfaces and applying three coats of white wash complete all as specified and directed by Engr-in-charge

Material and labour for preparation of plastered /unplastered surfaces of ceiling surfaces and applying one coat of white wash complete all as specified and directed by Engr-in-charge

Material and labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scaffolding for high rise bldgs etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and material and labour for applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge

Material and labour for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etc complete all as specified and directed by Engineer-in-Charge.

Material and labour Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scaffolding for high rise bldgs. etc complete all as specified and directed by Engineer-in-Charge.

Material and labour preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scaffolding for high rise bldgs etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scaffolding for high rise bldgs complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces complete all as specified and directed by Engineer-in-Charge

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C distane 30 CM to make PVC frame as per specification and drawings in SSR Part II complete all as specified and directed by Engineer-in-Charge

Supply and Fixing PVC wall paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings in SSR Pt- II complete all as specified and directed by Engineer-in-Charge

Supply and Fixing Anodised aluminium snap grid of size 605x605mm frame work for false ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete complete all as specified and directed by Engineer-in-Charge.

Material and labour for 4mm thick designed non asbestos fibre cement building boards fixed or laid/inserted to aluminium frame work complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of new ceiling board surfaces and applying two coat of oil emulsion distemper over one coat chalk whiting complete all as specified and directed by Engineer-in-Charge.

Material and labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable flase ceiling, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walk ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by Engineer-in-Charge.

Demolition of brick bats, terrace tiles etc on roof and removing the same etc complete all as specified and directed by Engineer-in-Charge.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for and removing to store from terrace complete all as specified and directed by Engineer-in-Charge.

Material and labour for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately) complete all as specified and directed by Engineer-in-Charge

Material and labour PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) cement concrete as a leveling course on roof surfaces and coping etc complete all as specified and directed by Engineer-in-Charge

Material and labour for water proofing treatment which shall be four course and shall be carried out as following : (a) Applying a coat of oil based bituminous primer @ 200 gms/ sqm on the prepared surfaces. (b) Applying a coat o blown type bitumen grade 85/25 conforming to IS:702 heated to a working temperature of 180 degree C and applied @ 1.2 Kg/Sqm the surface area. (c) Providing and laying 4mm thick APP modified torch applied water proofing membrane weighing not less than 4.00 Kg per square meter reinforced with non woven polyester matt, weighingnot less than 160gm/sqm having softening point not less than 140 degree C , Longitudinal tensile strengh not less than 650 N/5 CM, tear strength of 180 N (Min), a static puncture resistance of 180, keeping a minimum of 10 cm over laps and 15 cm end lap. (d) Finishing surface with solar reflective bituminous aluminium paint, @ 100 gm/Sqm complete including removing of existing waterproofing treatment complete all as specified and directed by EIC. The APP membrane shall be taken upto minimum 200 mm on vertical surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer for APP membrane and SBR latex complete.

Material and labour for weathering machine pressed coloured concrete cement tiles of size 300mmx300mmx20mm thick mix with grey cement and pigment laid over 20mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry in terrace complete all as specified and directed by Engineer-in-Charge.

Material and labour for chipping, removing carefully concrete work by low impact hammer breakar without damaging the structure & cleaning and disposal of debris out side the premises etc, hard concrete should not be removed by force including necessary scaffolding for high rise bldgs etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for clean existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material dirt etc complete applying two coats of alkaline rust converting primer FEOVERT confirming to ASTM-B-117, on the rebars, including cleaning the reinforcement with wire brush to remove loose rust spalls with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as specified and directed by Engineer-in-Charge.

Material and labour for replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed by Engineer-in-Charge.

Material and labour for carrying out application of Bi-polar migratory corrosion inhibitor EPCO-KP-100/Protectsil CIT/Ferogard 903 on concrete surface (This inhibitor shall have migratory kind of properly which permits the material to migrate to a vertical extent of 100 mm through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5) so it has non carcinogen activity with concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster confirming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5Cement-15 sand) -in damaged areas in 30mm thickness including leveling profliling and scaffolding for high rise buildings etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Providing and applying jacketing around columns/RCC members with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete all as specified and directed by Engineer-in-Charge. (Rates including jacketing, formwork and micro concrete)

Material and labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes in structural members at the intervals of 500 center to center in staggered manner or complete all as specified and directed by Engineer-in-Charge. in RCC structural element. Work shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fixing it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements.

Material and labour for Injecting of site cement slurry grout, in the ratio 1:2 (1- Cement, 2-water) including super plasticizer (Supercom-100) 250 ml/50 Kgs. Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 0.5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled complete all as specified and directed by Engineer-in-Charge. (for repair to wall & slab)

Material and labour for Injecting low viscosity MONOPOL (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materials:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting maintain the pressure at exi (0.5 to 1.0 kg/cm2) by monitoring pressure gauge at exit.Grouting the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles (Beam and columns) complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick cement concrete 1:3:6 type C-2 (40 mm graded crushed stone agg) as in sub base complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine pressed chequered cement coloured tiles of size 250mmx250mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate ) as in plinth protection and similar works 75mm thick and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 4mm thick bakelite sheet with decoratvie choice laminated on both side complete all as specified and directed by Engineer-in-Charge.

Removing of bldg materials exc 5 KM but not exc15.00 KM and depositing outside MoD land where directed complete all as specified and directed by Engineer-in-Charge.

Disconnecting & taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size & greasing ball bearing with specified qualilty grease including replacement of rubber reel with nut, bolts, split pins & re-assembling the ceiling fan as a one unit, unservucable

Material and labour for hanging/ fixing ceiling fan in position & re-comissioning the same including making electric connection complete all as specified and directed by Engineer-in-Charge.

Ditto all as per Ser item No 156.00 here in before but of exhaust fan any make & size complete all as specified and directed by Engineer-in-Charge.

Preparation of painted surfaces of ceiling fan of any make & size & applying one coat of synthetic enamel white paint by spray painting including making of MES No/Unit name at the bottom of the fan by applying balck paint complete all as specified and directed by Engineer-in-Charge.

Ditto all per item No 158.00 above but grey paint/green for exhust fan any size & make complete all as specified and directed by Engineer-in-Charge.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, removing material to store for keeping in safe custody and making good to disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for sub-main wiring with 2 runs of 2.5 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing and caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 2.5 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unserviciable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed by Engineer-in-Charge. Note: (a) Colour coding shall be followed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green

Material and labour for sub-main wiring with 2 runs of 4.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxes, reducer etc as required, including one run of 4.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unserviciable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed by Engineer-in-Charge. Note: (a) Colour coding shall be followed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green

Material and labour for sub-main wiring with 4 runs of 10.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade Caping casing not less than 25 mm dia (internal width) with all accessories like tees, elbows, junction boxes, reducer etc as required, including one run of 10.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed by Engineer-in-Charge. Note: (a) Colour coding shall be followed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green

Supply and Fixing in repair of double door type SPN DB 08 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by EIC. Make: Legrand cat No 507611 or as approved by GE . Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

Supply and Fixing in repair of double door type vertical type TPN DB 4 Way ,240V with 200A busbar , with metalic double door type IP 43 IK 09 protection suitable for housing MCCB's complete all as specified and directed by Engineer-in-Charge. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

Supply and Fixing MCCB FP 75 Amps,16KA, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing MCB SP 6-32 Amps,10KA, 'C' series 240V complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing MCB SPN 40 Amps,10KA 'C' series 240V complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing MCB TP 40 Amps,10KA complete all as specified and directed by Engineer-in-Charge.

Material and labour point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including modular box with cover plate frame in any module complete fixed on wall for fixing the switches, switch, socket complete all as specified and directed by Engineer-in-Charge. NOTE: a) Colour coding shall be followed as given below:- i) Phase - Red/Yellow/Blue ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. Note: (a) Colour coding shall be followed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One 5A switch socket combination on the same board

One 5A switch socket point on independent board

Material and labour for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete fixed on wall complete comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed by Engineer-in-Charge. Note: (a) Colour coding shall be followed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green

Material and labour for point wiring complete with 2.5 Sq. mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC moulded box/ hylem sheet ISI marked fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 2.5Sq. mm as earth continuity conductor connected to common earth dolly for 15 amp swich socket on independant board complete including modular box with cover plate frame in any module complete complete fixed on wall for fixing the switches, switch, socket complete all as specified and directed by Engineer-in-Charge. Note: (a) Colour coding shall be followed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green

Supply and Fixing ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing modular switch 1 way 6A,1 module complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing modular switch 1 way 16A,1 module complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing modular socket 6/16A,2/3 pin, combined 2 module complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for modular fan step regulator, 120W - 2 modular complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing lamp holder PVC/polycarbonate insulated body type complete all as specified and directed by Engineer-in-Charge. Make : C&S cat No ACBHA006 or as approved by GE

Supply and fixing in repair new generation wall/surface mounted bulk head LED fitting 10W, provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling including connecting up with copper conductor cable with suitable size and complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair walll/surface mounted 20W LED batten fitting engineering plastic batten with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size and complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair new generation recessed mounted ultra slim panel LED 2X2 Luminaire 40 watt and CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting to modern offices. Suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of LED down light 18W circular recess mounted, opaque diffuser complete with acessories high quality ecomonic energy saving lighting Suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing modular power socket 25A,2 module, 25A plug top, 25A mini MCB 'C' series 3KA including 4 module box with cover plate complete all as specified and directed by Engineer-in-Charge.

Disconnecting & taking down old Unserviceable cable & Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3½ core complete all as specified and directed by Engr-in-Charge.

Disconnecting & taking down old Unserviceable cable & Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core complete all as specified and directed by Engr-in-Charge.

Material and Labour for Earthing complete with GI plate electrode of size 600 X 600 X 6 mm buried directly and preferably vertically in ground (earth pit not less than 2.25 mtrs deep below ground level ) with top edge of the plate not less than 1.5 Mtrs below ground level, connected to earth strip 25x4 mm galvanized Iron strip by means of check nuts, bolts, washers etc all as shown in electrical plate No. 3 of SSR Part-I, connected to Earthing test point including earth work, 1:3:6 C1 PCC chamber, 1:2:4 B1 PCC cover with 8 mm dia steel bars at 100 mm C/C suitable size of GI pipe for earth lead protection and watering, water funnel etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 25x4mm GI earth continuity conductor or main earthing lead fixed to wall or buried in ground or drawn in conduit/ pipe or fixed to transformer/panel body complete all as specified and directed by Engineer-in-Charge

Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement LED 40W Street/building security light fittings with high pressure die cast housing with toughened glass and individual LED with secondary optics and IP66 protection complete all as specified and directed by EIC.

Supply and Fixing GI cable tray perforated type 2mm thick of size 250x50mm to be fixed on any wall (brick/srione) vertically/horizontally including all accessories complete bending,shaping,drilling,welding, cutting & all fixing arrangement complete all as specified and directed by Engineer-in-Charge.

Material and labour for GI pipe light grade 100mm dia for protection of UG cable crossing of nalha/bgrdge/road including road cutting etc complete all as specified and directed by Engineer-in-Charge.

Material and labour cement concrete in 1:2:4 type B1 using 20mm graded crushed stone aggregate for road cutting/pole couping exposed surfaced and fair and even finishing with out using any extra cement etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement GI arms bracket 30 degree bend, suitable pipe dia for security light & 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed by the Engr-in-Charge.

Supply and Fixing Ventilating fan 250 mm sweep size,RPM 1350, plastic body type incuding self cosing louver and making all electric connections complete all as specified and directed by Engineer-in-Charge. Make: Bajaj Product code 70049 or as approved by GE

Supply and Fixing in repairs of 0.71mm thick aluminium sheet cover, alloy 31000 H4 in ridges, Hips valley gutter including suitable size of rivets/nut bolts complete bending, shaping, drilling, cutting notching and complete all as specified and directed by Engineer-in-Charge.

ORIENT ELECTRIC CO

Genius Construction Co.

BOB ENTERPRISES

SHRI SAI ENTERPRISES

MADHU ENTERPRIZES

SHREE JAGDISH FURNITURE CO.

the bhimani group of companies