Replacement of existing damaged old sewer line near tower line office to Quarter no E/5-1 at BBMB Colony Slapper

Amount

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 meters.CSR 2020 Item No 6.6

Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means CSR 2020 item no 10.13 (a)(i)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.CSR 2020 item no 10.20

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete. CSR 2020 item no 18.19

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.CSR2020 Item no 9.8

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position CSR 2020 item no 18.1(C) Tees angles & channels

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.CSR item no 29.55 (a) Inside size 75x120 cm and 120 cm deep

Providing, laying in trenches and jointing of HDPE pipes having ISI specification IS:14333, PE100, class PN-6 marked on them, make Reliance/ Hasti / Dura-Line , laying the same in trenches to correct alignment and gradients, cutting and jointing testing for water tightness and making good the leakages and defects including cost of specials complete in all respects.CSR 2020 item no 29.44( C) 160mm o/d pipe

M/S SHARMA ELECTRICAL WORKS

UMESH VERMA