8168/2022-23/E8 PROVN OF 02 BATHROOM BLOCK FOR CERTAIN UNIT AT DOGRA FORT KIARI, TWO SOAKAGE WELL NEAR MT AREA OF D AND E HQ U FORCE KIARI AND PROVN OF FIRE POINT ,UNHD SYMBOL BOARD AND SIGN BOARD AT NYOMA UNDER GE 860 EWS

Amount

Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for Cement concrete PCC Type D-2 1:4:8(40 mm graded crushed stone aggregate) in foundations,filling and mass concrete complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) 20 mm graded crushed stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete in CM 1:4 and finishing the surfaces even and smooth (without using extra cement) as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and to be finished even and smooth without using extra cement - Internal Plaster complete all as specified and directed.

M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface in broken stone or boulders complete all as specified and directed.

M & L PCC type B-1 1:2:4 (20 mm graded crushed stone aggregate) for fixing hold fast complete all as specified and directed.

S & F MS flat iron of size 25x3 mm as in hold fast conforimg to Fe 410-0 or Fe-310-0 complete all as specified and directed.

Plinth protection 75 mm thick in PCC type C1 1:3:6 (using 20 mm graded aggregate crushed stone aggregate) laid in alternate bays (not exc 2 Sqm each) finishing even smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed at site.

M&L for Cement Concrete type D-2, 1:4:8 (40 mm graded crushed stone aggregate) 100mm thick as Sub base complete all as specified and directed.

M&L for 40mm thick Cement Concrete type B-1, 1:2:4 (20 mm graded aggregate) as in floor Sub base complete all as specified and directed.

M & L for coloured non-skid ceramic tiles 7 to 8 mm (square/rectangular) rea of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc over and including 15 mm thick cement mortar screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for colour glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of cement mortar 1:4 complete all as specified

M&L for Glazed and skelton Windows, ventilators shutters 30 mm thick 2nd class soft wood, open rebated and prepared to receive glass, guage, etc, divided in to square with plain, chamfered or rounded mitred and rebated sash bars, any numbers, size of members of shutters as specified in SSR Part I Section 8 clause 8.20 (b) as in windows complete all as specified and as directed.

S&F for 2nd Class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified ans as directed.

M&L for 35mm 2nd class HW plain framed , panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commerical ply or 12mm veneered particle board with commerical veneering on both faces. The size of rail and stile as per IS:1003 complete all as specified ans as directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified.

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified.

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300 mm long complete all as specified.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

M&L 4 mm thick glass panes ordinary quality and glazing with oil putty in square n .exc 0.50 Sqm in each Pane etc complete all as specified.

S & F steel work in roof trusses (framed ) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces cleats etc complete all as specified.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as directed by Engr-in-Charge.

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes etc. with riveted, bolted or welded attachment confirming to Fe 410-W (Gde E-250), complete all as directed by Engieer-in-charge.

S & F mild steel bolts neck exc 10 mm dia and n exc 15 mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each scre-wed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified.

M&L for preparing newly plastered surface and applying two coat of white wash on walls complete all as specified and directed.

M & L for providing two coats of synthetic enamel painting to new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed .

S&F Rotational moulded water tank 1000 litre polye-thylene water storage tanks triple layered (cylindrical vertical with threaded closed top) hoisted and fixed in position all as spd and directed by engr in charge.

S&F 20 mm bore ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.

S&F Viterous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connectoin to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor complete all as specified and directed.

S & F of PVC (Plastic polymer Cistern) low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and S & F of 32 mm dia PVC flush pipe of suitable length and making all connection complete all as specified and directed.

S&F 15 mm dia bib tap chromium plated with capstan head, screwd down for iron pipe or brass ferrule complete all as specified

S&F 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or fixed to wall complete as spd and directed.

S&F 75 mm dia PVC (SWR) bends any radius complete as spd and directed.

S&F 75 mm dia PVC floor trap , plain with grating including jointing with solvent. as spd and directed.

S&F Viterous China wash basin, white, flat back, size 550 X 400 mm incl waste coupling CP 32mm dia brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-charge.

S&F 32 mm bore waste pipe Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,or in floors, as spd and directed.

S&F Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, as spd and directed.

S&FStop valves 15 mm chromium plated fancy type caste copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , as spd and directed.

S &F 16 mm dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UN stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threated polypropylene random fittings laid in trenches etc.

S&F15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as spd and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm as spd and directed.

Excavation over areas n.exc 1.5m deep and and getting out in hard/dense soil

Excavation over areas exc 1.5m deep and n.exc 3.00 m deep and getting out in hard/dense soil

M & L for PCC 1:3:6 type C-2 (Nominal Mix) using 40 mm graded crushed stone aggregate as in foundation filling mass concrete and similar work complete all as specified and as directed.

M & L for Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed

M & L for Walling of random rubble stone masonary, uncoursed, well bonded, bedded and solidly hearted, laid dry complete all as specified and directed

M & L for providing RCC type B-1 1:2:4 using 20 mm graded aggregate crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

M & L for rough finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slab for manhole set in CM 1:4 including necessary form work complete all as specified and directed by Engr in Charge.

M&L for Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping, benching bed plates and the line including necessary form work and finishing all exposed surface of concrete as per clause 4.11.16.2(a) of SSR Part-I (2009) complete all as specified and directed by Engr-in-Charge.

M & L for loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pit, soakage wells complete all as specified and directed by Engr in Charge.

S&F 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors complete all as specified.

M&L Concrete bed 1:4:8 type D-2 using 20mm graded crushed stone aggregate to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested bore of pipe in 110 mm.

Supply only Integral Water proofing compound.

M&L point wiring complete for one light / bell / fan point controlled by one no, 1-way, 5 Amps switch. with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)

All as per Srl item no. 64 here-in-before but one 3 Pin socket outlet, 5 Amp on independent board

All as per Srl item no. 64 here-in-before but one 3 Pin socket outlet, 5 Amp on same board

All as per serial item No 64 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm FRLS PVC copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including FRLS PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly.

S&F switch piano flush button single pole one way 5 Amps complete all as specified and directed by Engineer-in-Charge

S&F in replacement of socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed by Engineer-in-Charge

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp and 15 Amp, flush type complete all as specified and as directed by Engr-in-charge.

S&F of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

Supply and fixing LED lights with complete fitting 1x 16 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F MCB single pole and neutral 32 to 40 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge

S&F MCB single pole 5 to 30 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200,with copper winding of sweep 250mm complete all as specified.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing new energy saving LED Bulk head fitting 12 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Eng-In-Charge

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to CBDB’s as specified or indicated including testing on completion .

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor (Stranded) 1100V grade cross-sectional area 10 Sqmm 2 core laid in trenches or passing through pipe or fixed on pole etc complete all as specified and directed by Engr-in-Charge

M&L for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40 mm thick complete all as specified and directed by Engineer-in-Charge

M&L for sand cushioning to under ground electric cable complete all as specified and directed by Engineer-in-Charge

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified

M&L for Second class softwood in scantling frame and fixed As specified and directed by Engr-in-charge.

M&L for corrugated galvanised mild steel sheet 0.63mm thickwith two corrugation side lap ,fixed with two coach screws and washer ,in roofs,wall etc with grade of zinc coating 275 complete all as specified

M&L for mild steel sheeting 0.80mm thk,in ridges ,hips,valley gutters ,drip and straight flashing (length and girth fixed) complete all as specified

M&L 16mm round bars as hooks cut to length and bent to shape required incl cranking complete as specified and directed by Engr-in-charge

M&L for preparing of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for Preperation and three coats of white wash on newly plastered surfaces complete all as specified and directed by Engr-in-charge.

Preparing new zinc or (galvanised )surfaces to receive painting by coating with mordant solution incl washing and cleaning complete as specified and directed by Engr-in-charge

Manufacturing, supply and fixing sign board of size 1200x 1200mm, MS frame work shall be made of square hollow section 50x50mm and 3.65 mm thick with 02 support post leg of length 1.8 metre, 1mm thick plain black sheet welded between frame including reflective sheet, writing letters, synthetic enamel paint over a coat of primer on MS frame and sheet The Board shall be embedded in PCC 1:4:8 type D 2 using 40 mm graded crushed stone aggregate including excavation in post holes, complete all as directed by Engr-in-Charge.

Manufacturing, supply and fixing UNHD fire symbol board of size 1200x 1200mm, MS frame work shall be made of square hollow section 50x50mm and 3.65 mm thick with 02 support post leg of length 1.8 metre, 1mm thick plain black sheet welded between frame including reflective sheet, writing letters, synthetic enamel paint over a coat of primer on MS frame and sheet The Board shall be embedded in PCC 1:4:8 type D 2 using 40 mm graded crushed stone aggregate including excavation in post holes, complete all as directed by Engr-in-Charge.