REPAIR MAINT OF LEAKAGE SEEPAGE OF ROOF CHAJJA PROJECTION BATHROOM SUNKEN TREATMENT CLEANING OF OVER HEAD TANK CERTAIN ALLIED WK JCOS OR MD ACCN AT MALCOLM LINE AND REPAIR MAINT AND CLEANING OF SEWAGE LINE MANHOLES SEPTIC TANK MD ACCN OF AGE BR I

Amount

M & L for roughening / taking down existing roof treatment surfaces including plaster over old concrete roof by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed. Note : All demolished item shall be removed from Defence land as per dirns of Engr-in Charge.

M & L for brushing neat cement slurry with 3 Kg of cement per Sqm for bonding of old concrete surface to new concrete/plaster surfaces complete all as specified and directed.

M & L for cutting out cracks to 6 mm wide 'V' section in existing roofs or terrace (if cracks > 2.5 mm wide), cleaning out, wetting, grouting with and including chemical compound, water and cement Sand slurry in the proportion of (1:3) by weight mix or as per manufacturers instructions complete all as specified and directed. Note : All demolished item shall be removed from Defence land as per direction of Engr-in Charge.

M & L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with Liquid waterproofing chemical @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M & L for 10 mm thick rendering in CM (1:3) mixed with Liquid water proofing chemical compound @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M & L for screed bed 15mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for complete water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete. (i) Cleaning of new rendered surfaces properly and drying the surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm (iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying two coats of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats complete as per manufacturers instruction. Note:- Waterproofing treatment shall be executed by a qualified team provided by the manufacturer or their authorised applicator.

M&L for complete water proofing treatment to sunken floor surfaces of RCC slab by the following specifications including demolition/taking down and cleaning of old surface as specified and directed :- (a) Plain cement concrete 1:5:10 mix, type E-2 (using 40mm graded aggregate) as in filling of sunken portion complete all as specified and directed. (a) PCC (1:1.5:3) type A0 with using 12.5mm graded stone aggregate in slope of average thickness 50mm mixed with and including liquid water proofing compound as approved by GE. (b) Rendering 15mm thick in CM 1:3 mixed with & including water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Finally Apply two coats of black bituminous paint on complete surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc. (d) Spray of sand on bituminious surfaces. Note:- Waterproofing treatment shall be executed by a qualified team provided by the manufacturer or their authorised applicator.

M&L for PCC 1:2:4 type B 0) using 12.5 mm graded stone aggregate mixing with WPC as in levelling course and in sunken portions etc incl demolition of old PCC complete all as specified and directed.

M & L for complete reparing of RCC roof projection, chajjas,roofs, facia, column etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hrs , insert the new reinforcement to damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : The work shall be carried out on building upto 8.00 m height. The quoted rate shall be inclusive of all necessary scaffolding and safety devices as required. No additional payment shall be admissible.

M&L (in repairs) for preparation of surface for application of water based epoxy resin coating of waterproofing for internal wall dampness and filling of cracks over & including CM (1:4) and making the surface smooth and finish complete all as specified and directed. Note : (a) Complete removal of treatment/plaster(where needed) on internal walls and preparation of surface after rendering with CM(1:4) for application and making the surface wet .(b) apply first coat of Dr. fixit Dampguard in ratio (1U base:1U hardner:1U water) in one direction and leaving the coat to dry for 6 to 8 hrs.(c) apply second coat of Dr. fixit dampguard in ratio(1U base:1U hardner:1U water) in perpendicular direction to the first coat applied and leaving the surface to dry for 24 hrs. Material: Dr. fixit Dampguard or the makes/brand/manufacturers as specified in Appendix 'A' of the Particular Specification.

S&F in repairs mild steel work (Tubular, square/rectangular hollow section) as in purline, rafter and wind ties, cleat roof trusses etc including securing bed plate, plat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to IS 1161-1979 dge St-240 complete all as specified and directed.

M&L for preparation of new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F 0.50mm thick (total coated thickness) pre-colour, pre profiles Galvalume /zincalume sheets of required colour and design having tensile strength of 550 Mpa, zinc colour coating AZ-150 as in roof ,wall cladding,north light curves,fixed with zinc coated self drilling fastener including EDPM washer complete laid with one corrugation side laps and min 150mm end laps laid to slope all as per manufacturer/profile maker instructions including dismantling old Plain or corrugated steel sheeting,any gauge, thickness, complete all as specified and directed. Note:- The pre-painted galvalume zinc GI based profile pattern steel should be TATA Blue scope colour brand XRW or the makes/brand/manufacturers as specified in Appendix 'A' of the Particular Specification.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement for inserting galvalume sheet on wall and necessary coping work over the sheet along the wall complete all as specified and directed.

M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound complete including taking down old plaster complete all as specified and directed. Note: WPC shall be measured and paid separetly.

M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement including taking down old plaster complete all as specified and directed.

M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement including taking down old plaster complete all as specified and as directed .

Supply only Liquid water proofing compound ISI marked complete all as specified and as directed .

M & L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed

M&L for applying two coat of oil bound distemper over a coat of 1.50 to 2mm thick wall care putty (JK/Birla) on new plaster surface of walls after -preparation of surfaces complete all as specified and as directed .

M & L for preparing new surfaces of wall and applying three coats of white wash on ceiling and cornices complete all as specified and directed.

M & L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling Birla white putty and applying one coat of cement based paint over one coat of primer complete all as specified and directed.

M & L for complete removal of existing treatment on old decorated surfaces of wall and applying two or more coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade over and including 1.50 to 2mm thick wall care putty and one coat of priming coat of exterior primer complete all as specified and directed. Note- (a) Application of primer and arcylic emulsion paint shall be carried out using an airless spray machine (mechanical means). (b) Wall care putty shall be applied properly to achieve a smooth wall surface. (c) The work will be carried out in a building up to Ground plus Three (G+3) floors. (d) The quoted rate shall be inclusive of all necessary scaffolding and safety devices as required. No additional payment shall be admissible.

M&L for preparation of old decorated surfaces of wall including brooming, washing, roubbing scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming, washing, rubbing scraping down with complete removal Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of white wash on walls complete all as specified and directed.

All as per item No. 26.00 above but on ceiling surface

M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No. 27.00 above but on steel surfaces.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for 40mm thick PCC type B1 (1:2:4) using 20 mm graded stone crushed stone aggregate as in flooring and finished complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1: 6 including demolition of old tiles/flooring complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 including demolition of old tiles/flooring complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x200x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including10 mm thick backing coat on fair faces of brick work in CM (1:4) including demolition of old tiles/flooring complete all as specified and as directed.

M&L in repair for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for 75 mm thick PCC1:4:8 type D-2 using 40mm graded as in foundation, sub base of floor, etc including demolition of old PCC complete all as specified and directed

M & L for 75mm thick cement concrete 1:3:6 type C2, with using 40mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc including demolition of old PCC complete all as specified and directed

M&L for chequered cement concrete tiles (glossy finish) 40 cm x 40 cm x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement and no pigment laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) and necessary PCC coping ,type C1 1:3:6 ncluding dismantling of old tiles laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and no pigment and necessary PCC coping ,type C1 1:3:6 including dismantling of old tiles laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L for 80 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and no pigment and necessary PCC coping ,type C1 1:3:6 including dismantling of old tiles laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L for stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and as directed.

S&F in repair of 500 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including taking down old water tank complete all as specified and as directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

S&F in repair of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 15mm-142 gms) complete all as specified and as directed.

S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes incl taking down old pipe complete all as specified and as directed.

All as per item No 45.00 above but 20mm bore

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar 1:4 ,cutting depth not exc 10 cm complete all as specified and directed.

S&F in repairs 15 mm CP long neck bib taps screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.

S&F in repair stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repair pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed with PVC waste pipe complete all as specified and directed.

S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

M&L for stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge.Note:- Size of plate rack should not be less than 900x900 mm and weight of rack shall not be less than 8.5 Kg each complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe , pull or push type including brackets complete all as specified and directed.

Taking down and re-fixing WHB/flushing cistern/EWC/ kitchen sink and similar items at same or other location, including cutting for ends and pinning in and ends of brackets or erecting stand but exclusive of fixing of supply and waste pipes,etc complete all ass specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe)incl Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and as directed .

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.

S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. .

S&F in repair flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specified and as directed.

S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as complete all as specified and directed.

S&F in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and directed.

S&F in repairs Plastic water closet seat cover in white colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.

S&F in repairs wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & including MS adjustable brackets or erecting stand complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm.complete as in repairs.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs corner glass shelf (with bracket) complete all as specified and directed.

S&F in repair 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repair of CP grating 100mm dia complete all as specified and directed.

S&F in repair 25 mm dia aluminium powder coated drappery curtain rod with brass /nickel chrom polish bracket complete all as specified and directed .

S&F in repair CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut fixed in repair complete all as specified and directed.

S & F in repair over head tank cover of 500-1000ltr capacity all as specified and directed by Engr-in-charge.

S & F in repairs brass spindles for bib tap and angle cock etc (as per sample kept in office) complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription n exc 1.0 sqm each complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription exc 1.0 sqm but nexc 2.0 sqm each complete all as specified and directed.

S&F in repair 100mm aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

All as per item No 80.00 above but 150mm long

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section and cast iron - aluminium alloy 300 mm long complete all as specified and directed.

S&F in repair 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F in repair 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repair 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repair 50mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repair 40mm dia cupboard knobes fixed with nuts, screw and washer of MS, bright finshed complete all as specified and directed.

S&F in repair of floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repair Mild Steel Door Spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs of Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per Item No 91.00 above but except pipe

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per Item No 93.00 above but except pipe

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F PVC junction single (single T) 110mm dia equal or unequal with access door complete all as specified and directed.

S&F PVC junction single (single T) 75mm dia equal or unequal with access door complete all as specified and directed.

Cleaning of roof slab/chajja with sweeping with brooms,removing all depositions/ mud/ vegetations etc and removing the spoil to a distance n.exc 50m complete all as specified and directed.

Cutting of shubs,vegetation including small trees,grass,bush,weed and roots under growth and saplings n.exc 30cm in girth on wall/roof/chajja upto 15.00 hight including necessary scaffolding/ ladder etc and removing to adistance n.exc 50m ,clearing site complete all as specified and directed. Note : The work shall be carried out on buildings upto 15.00 m height. The quoted rate shall be inclusive of all necessary scaffolding and safety devices as required. No additional payment shall be admissible.

Cleaning of roof slab/chajja with sweeping with brooms,removing all depositions/ mud/ vegetations etc and removing the spoil to a distance n.exc 50m complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc including writing date of cleaning and applying a coat of bleaching powder complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc including writing date of cleaning and applying a coat of bleaching powder complete all as specified and directed.

Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc or for shafts, walls, cess-pits, manholes, pier holes etc n.exc. 10 sqm on plan and n.exc. 1.5m in depth, getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning, filling in including spreading, levelling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

S&F Salt glazed stoneware drain pipe (SGSW) Grade 'A' 150 mm bore laid in trenches and jointed including taking down old existing pipe complete all as specified and directed.

All as per item No 107.00 above but 200 mm bore pipe

All as per item No 108.00 above but 100 mm bore pipe

S&F in repairs 200mm reinforced concrete pipes, class NP2, laid and jointed complete with collarscomplete all as specified and directed.

M & L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in bed drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including taking down old existing concrete complete all as specified and directed.

M & L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in bed drain pipes of 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including taking down old existing concrete complete all as specified and directed.

M & L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in bed drain pipes of 100 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including taking down old existing concrete complete all as specified and directed.

M & L for cleaning of sewage line, SWG/CI pipe or RCC pipe vertically/horizontally of dia n.exc 100 mm bore by rodding well flushing by using sufficient water and making it to clear for easy flow of sewage from WC gully trap Nahani trap including desludging of and making it the proper functional to entrie satisafaction of Engineer-in-Charge and removing the sludge out side MD land and burying it in pits and covering with earth and spreading hydrated time @ 1 Kg per Sqm of covered area complete all as specifed and directed at site complete all as specified and directed at site complete to entrie satisfaction of Engr-in-Charge.

M&L for cleaning of sewage line, SWG/CI pipe or RCC pipe vertically/horizontally of dia n.exc 150 mm by rodding well flushing by using sufficient water and making it to clear for easy flow of sewage from WC, gully trap, Nahani trap including desludging of and making it the proper functional to entire satisfaction of Engineer-in-Charge and removing the sludge, silt etc to a distance n.exc 500m and burying it in pits and covering with earth and spreading hydrated lime @ 1 Kg per Sqm of covered area complete all as specified and directed at site complete to entire satisfaction of Engr-in-Charge.

All as per item No 115.00 above but for 200mm bore

M&L for cleaning of septic tank by desludging, distilling and getting out all silts and sludge, organic and inorganic materials by manually/mechanically and removing the sludge and burying it into the pits and covered with earth including spreading hydrated lime 1 Kg per pit complete all as directed at site.After complete cleaning of septic tank the manhole cover will be refixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete to entire satisfaction of Engineer-in-Charge.

M&L for cleaning/desludging of existing septic tank, of any capacity and depth with inlet/outlet chambers including taking out sludge (both organic and inorganic matter) in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc by means of sewage sucking machine and after plugging the incoming sewer line through combined high pressure water jetting/ suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the sludge outside MD land by any means at a place meant for the purpose by local munucipality complete all as specified and directed at site.

M&L for cleaning/clearing of manhole of any description any size and depth and removing sludge and accumulated solids/semi solids with proper equipment and washing down with water for smooth functioning of sewage line and man hole as specified and waste obtained shall be removed to a distance exceeding 200 m and not exceeding 250m and buried in ground including necessary excavation earth work and spreading of bleaching powder all as directed by Engineer-in-charge.

Cleaning and removal of blockage from EWC/IWC/Gully traps/floor trap/wash hand basin etc choked with mud and other accumulated solids, semi solids etc with proper cleaning rubber bush/other instruments and cleaning with water for proper functioning of same complete all as specified and directed by Engineer-in-Charge.

M & L for cleaning/clearing of sewer line (including inbetween manholes) up to 200 mm bore sewer line of any type and any location, depth of manhole n.exc 3.0m in depth, section, line between the sewer lines to septic tank/soak well/sump well and cleaning any type of blockage including desilting, descaling and dechocking of drain and manhole with combined high pressure water jetting cum suction vacuum type machine mouinted on LCV/HCV and having facility of high pressure vacuum and provn of hydraulic application through high pressure thermo plastic fibre based water jetting hose and conical round shape nozzle pipe and flushing after cleaning and removing the sludge outside MD land by any means at a place meant for the purpose by local munucipality complete all as specified and directed at site. Note for item No. 114.00 to 121.00:- (i) Necessary precautions as well as safety measures shall be taken by the contractor without any extra cost for working in the foul condition. (ii) The contractor shall be enterily responsible for the lapse, mishappenig to any of the manpower deployed and /or to other equipment/machinery/material at the site.

M & L for Brick work with using Modular size flyash Bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of old brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as specified & directed.

Extra for forming fair finished drain or channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed.

M & L for pre-cast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs,manhole cover and similar work complete all as specified and directed.

S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete as directed and specified.

S&F mild steel round bars 10mm dia FE 410W Gde E-250 quality A or Fe 290 gde E-165 cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips for man hole cover handle complete all as specified & directed.

Dismantling of 75mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified & directed.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified & directed.

S&F 75mm dia Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified & directed.

S&F 100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified & directed.

S&F in repair PVC (SWR) pipe, 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed.

S&F in repair PVC (SWR) pipe, 90 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) bends 75 mm bore, with access door complete all as specified and directed.

S&F in repair PVC (SWR) bends 90 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal with access door 90mm bore pipes complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl, 75mm bore complete all as specified and directed.

M&L in repairs PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified & directed.

M&L in repairs 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement and taking down old trap and necessary concrete work complete all as specified & directed.

S&F in repair Vitreous China wash down water closet pan (semi-pedestal pattern)(Anglo-Indian type), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified & directed.

M & L for 20 -25 mm thick kota stone, machin cut kota stone slab flooring(mirror polished) over and including 15mm cement screed base laid in CM 1:6 , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including demolition of old existing flooring complete all as specified & directed.

M& L for cement concrete 1:2:4 type B-2 (40mm graded stone aggregate ) in surface channels and drains,coping incl finshing of exposed surfaces even & smooth with using extra cement complete all as specified.

S & F in repairs Galvanised steel tubes 40mm dia medium grade for spout pipe etc including welding, greasing etc complete all as specified & directed.

S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified & directed.

Chitragupta Construction (BID ID -3345159)

M/S Parikshit Sharma (BID ID -3340993)

Manoj Electricals (BID ID -3344237)

M/S Sunshine Construction (BID ID -3334981)