REPAIR MAINTENANCE OF DG SETS, SERVO VOLTAGE STABILIZER, SECURITY LIGHT, GARDEN LIGHT, AND CONNECTED WORK AT DETT-B AND DETT-III AREA UNDER AGE EM OF GE 862 EWS

Amount

Maintenance and servicing of 500 KVA DG set of any make by the authorised technician/ service engineer of OEM or their authorised service dealer, checking the machanical and electrical healthyness of the diesal engine and alternator, servicing of the DG set including cleaning & replacement of air filter, changing of fuel filter and lubracating oil filter, rubber hoses, worm drive clamps, nuts & bolts, draining out unserviceable engine oil from engine and refill with new engine oil, cleaning all sludge/deposits in the oil sump and removed off the site as per schedule, minor adjustment of control parameters, greasing, tracing out the defects and replacement of defective spares, testing and commissioning including taking out the old unserviceable one to keep the DG set healthy and serviceable required at 250 running hours or six months which ever is earlier as specified and directed by Engineer-in-Charge at site. (Notes :- (a) Spare Parts , engine oil will be measured and paid separately as supply only. (b) In case, any abnormality found in between normal routine inspections, the service personnels must attend the service call urgently within 24 hrs.(c)Apart from these routine servicings, major repair/replacement if any as decided by Engineer-in-Charge will be measured and paid separately available within the scope of this schedule.(d)A Log Book indicating the details of all types of repairs and maintenance carried out time to time has to be recorded by the contractor's rep/supervisor and endorsed by JE(E/M) and AGE(E/M) . The contractor's rep/supervisor will monitor the serviceability of all the DG Sets and give report to JE (E/M) and AGE(E/M). This register is required to be produced at the time of claiming payment. (e) Replaced spare part shall be as per make of DG sets duly recommended by OEM.

All as per Srl Item No. 1.00 here-in-before but DG set of capacity 320 KVA.

All as per Srl Item No. 1.00 here-in-before but DG set of capacity 160 KVA to 200 KVA.

All as per Srl Item No. 1.00 here-in-before but DG set of capacity 100 KVA to 125 KVA.

All as per Srl Item No. 1.00 here-in-before but DG set of capacity 40 KVA to 63 KVA.

All as per Srl Item No. 1.00 here-in-before but DG set of capacity 7.5 KVA to 30 KVA.

Supply only diesel filter element as per existing make and model of DG Set 7.5 to 30 KVA, complete all as specified and directed.

All as per Srl Item No. 07.00 here-in-before but DG set of capacity 40 to 63 KVA

All as per Srl Item No. 07.00 here-in-before but DG set of capacity 100 KVA to 125 KVA

All as per Srl Item No. 07.00 here-in-before suitable for but DG set of capacity 160 KVA to 200 KVA.

All as per Srl Item No. 07.00 here-in-before suitable for but DG set of capacity 320 KVA.

All as per Srl Item No. 07.00 here-in-before suitable for but DG set of capacity 500 KVA.

Supply only oil filter as per existing make and model of DG Set 7.5 KVA to 30 KVA, complete all as specified and directed.

All as per Srl Item No. 13.00 here-in-before but DG set of capacity 40 to 63 KVA.

All as per Srl Item No. 13.00 here-in-before but DG set of capacity 100 KVA to 125 KVA .

All as per Srl Item No. 13.00 here-in-before but DG set of capacity 160 KVA to 200 KVA.

All as per Srl Item No. 13.00 here-in-before but DG set of capacity 320 KVA.

All as per Srl Item No. 13.00 here-in-before but DG set of capacity 500 KVA.

Supply only air filter element as per existing make and model for DG Set 7.5 to 30 KVA complete all as specified and directed.

All as per Srl Item No. 19.00 here-in-before but DG set of capacity 40 KVA TO 63 KVA.

All as per Srl Item No. 19.00 here-in-before but DG set of capacity 100 KVA to 125 KVA

All as per Srl Item No.19.00 here-in-before suitable for but DG set of capacity 160 KVA to 200 KVA.

All as per Srl Item No.19.00 here-in-before suitable for but DG set of capacity 320 KVA.

All as per Srl Item No.19.00 here-in-before suitable for but DG set of capacity 500 KVA.

Supply only fan belt suitable for D.G. Set of capacity 320 KVA to 500KVA, complete all as specified and directed.

Supply only fan belt suitable for D.G. Set of capacity 100 KVA to 200 KVA, complete all as specified and directed.

Supply only fan belt suitable for D.G. Set of capacity 40 KVA to 63 KVA, complete all as specified and directed.

Supply only fan belt suitable for D.G. Set of capacity 7.5 KVA to 30 KVA, complete all as specified and directed.

Supply only rubber hose pipe set with clamps suitable for D.G. Set 500 KVA capacity complete all as specified and directed.

All as per Srl Item No. 29.00 here-in-before but DG set of capacity 320 KVA, complete all as specified and directed.

All as per Srl Item No. 29.00 here-in-before but DG set of capacity 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 29.00 here-in-before but DG set of capacity 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 29.00 here-in-before but DG set of capacity 7.5 KVA to 40 KVA, complete all as specified and directed.

Supply & filling for Engine Oil, SAE 20W 40 grade after taking out old engine oil from the sump of DG sets installed at various location and cleaning the oil sump thoroughly, complete all as specified and directed.

Supply and filling of Coolant (type of coolant- 'water coolant') in radiator for DG sets installed at various locations, complete all as specified and directed

S&F in repair for water temperature gauge having temparature measuring range upto 150 degree celcius, 150mm nominal size, black numerals with white background including sensor and cable, complete all as specified and directed.

Dismantling the radiator of 7.5 KVA to 30 KVA DG Sets from engine, transportation to the workshop, repairing of top and bottom tank including necessary welding / brazing & making the radiator leak proof, cleaning the complete radiator internally with chemical agent (K Clean) and outside with Kerosene oil and high pressure water jet, and assembling the radiator including replacement of all old rusted mild steel nuts, bolts washers & gasket sets and hose pipe asembly including transportation from wksp to original work site & fixing to the engine and testing, complete all as specified and directed. (Note:-Coolant for radiator will be measurd and paid separately)

All as per Srl Item No. 37.00 here-in-before but DG set of capacity 40 KVA to 63 KVA, complete all as specified and directed

All as per Srl Item No. 37.00 here-in-before but DG set of capacity 100 KVA to 200 KVA, complete all as specified and directed

All as per Srl Item No. 37.00 here-in-before but DG set of capacity 320 KVA to 500 KVA, complete all as specified and directed

S&F in repair for water pump of suitable capacity for D.G. Set 30 KVA to 63 KVA capacity, complete all as specified and directed.

All as per Srl Item No. 41.00 here-in-before but DG set of capacity 100 KVA to 320 KVA, complete all as specified and directed.

S&F in repair for fuel pipe steel braded with banzo bolts, washers etc, length 30 cm long, complete all as specified and directed.

S&F in repair for fuel pipe steel braded with banzo bolts, washers etc, length 45 cm long, complete all as specified and directed.

S&F in repair for fuel pipe steel braded with banzo bolts, washers etc, length 60 cm long, complete all as specified and directed.

S&F in repair for fuel level indicator transparent PVC pipe of suitable dia for the fuel tanks complete all as specified and directed.

S&F in replacement of fuel injection pump from the authorised dealer complete with all connected items as per existing for DG set 7.5 KVA to 30 KVA, complete all as specified and directed.

All as per Srl Item No. 47.00 here-in-before but for DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 47.00 here-in-before but for DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 47.00 here-in-before but for DG set 320 KVA to 500 KVA.

S&F in repair for gaskets, springs including tappet setting etc, Capacity of DG set 7.5 KVA to 30 KVA, complete all as specified and directed.

All as per Srl Item No. 51.00 here-in-before but for DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 51.00 here-in-before but for DG set 100 KVA to 200 KVA.

All as per Srl Item No. 51.00 here-in-before but for DG set 320 KVA to 500 KVA.

S&F in replacement for turbo charger of suitable capacity complete of DG set 40 KVA to 63 KVA capacity, complete all as specified and directed.

S&F in replacement for turbo charger of suitable capacity complete of DG set 100 KVA to 200 KVA capacity, complete all as specified and directed.

S&F in replacement for battery 12 volts 180 AH red coloured specially designed for diesel Gen Set including disconnecting old unserveceable battery and deposited to MES yard, complete all as specified and directed .

S&F in replacement for battery 12 volts 120 AH red coloured specially designed for diesel Gen Set including disconnecting old unserveceable battery and deposited to MES yard, complete all as specified and directed .

S&F in replacement for battery 12 volts 92 AH red coloured specially designed for diesel Gen Set including disconnecting old unserveceable battery and deposited to MES yard, complete all as specified and directed .

S&F in replacement of battery leads set, PVC insulated multisranded, copper conductor 70sqmm, each 1.25 mtr long, duly fitted with brass clamps, copper lugs for DG sets of any capacity, complete all as specified and directed.

Supply & filling of distlled water for batteries, complete all as specified and directed

Repair and overhalling of self starter of capacity DG set 7.5 KVA to 30 KVA including replacement of worn out clutch assembly bush, spring, plunger assembly, solenoid switch corbon brushs, spring etc, complete all as specified and directed

All as per Srl Item No. 62.00 here-in-before but DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 62.00 here-in-before but DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 62.00 here-in-before but DG set 320 KVA to 500 KVA, complete all as specified and directed.

S&F in replacement with exhaust silencer complete with all connected accessories suitable for existing DG set of capacity 40 KVA to 200 KVA, complete all as specified and directed

All as per Srl Item No. 66.00 here-in-before but DG set 250 KVA to 320 KVA, complete all as specified and directed.

Preparation of old steel painted surfaces by cleaning/ rubbing/ scraping of old paint from the DG set of capacity 200-320 KVA as per existing and making surfaces ready for paint outdoor and indoor and spray painting with gun one coat of synthetic enamel paint of approved colour, including writing SM/MES No, capacity and other details with white paint all as required at site or as directed.

Preparation of old steel painted surfaces by cleaning/ rubbing/ scraping of old paint from the DG set of capacity 30-160 KVA as per existing and making surfaces ready for paint outdoor and indoor and spray painting with gun one coat of synthetic enamel paint of approved colour, including writing SM/MES No, capacity and other details with white paint all as required at site or as directed.

S&F in repair for slip ring with bearing pully/ assembly as per existing make and model of DG set 7.5 KVA to 30 KVA capacity, complete all as specified and directed.

All as per Srl Item No. 70.00 here-in-before but DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 70.00 here-in-before but DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 70.00 here-in-before but DG set 320 KVA to 500 KVA, complete all as specified and directed.

S&F in repair for stator (static parts of the alternator) as per existing make and model of DG set 7.5 KVA to 30 KVA capacity including transportation expense if reqd, complete all as specified and directed.

All as per Srl Item No. 74.00 here-in-before but DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 74.00 here-in-before but DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 74.00 here-in-before but DG set 320 KVA to 500 KVA, complete all as specified and directed.

S&F in repair for flywheel stator ring/ rotor as per existing make and model of DG set 7.5 KVA to 30 KVA capacity including transportation expense if reqd, complete all as specified and directed.

All as per Srl Item No. 78.00 here-in-before but DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 78.00 here-in-before but DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 78.00 here-in-before but DG set 320 KVA to 500 KVA, complete all as specified and directed.

M&L for rewinding of altermator, stator and rotor of Generator set of capacity 7.5 KVA to 30 KVA with super enamelled copper winding wire including reassembling of alternator and transportation of alternator from existing site to workshop and back to be deemed in quoted rate. After rewinding and reassembling of alternator with DG set will be tested to the entire satisfaction of the Engr-in-Charge. Note:- Super enamelled copper winding wire will be measured and paid separately under relevant item.

All as per Srl Item No. 82.00 here-in-before but DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 82.00 here-in-before but DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 82.00 here-in-before but DG set 320 KVA to 500 KVA, complete all as specified and directed.

Supply only super enamelled copper winding wire of size and gauge as per existing alternator of DG sets including insulation, varnishing, drying for Srl item nos. 82 to 85, complete all as specified and directed.

S&F in replacement of rectifier from the authorised dealer complete with all connected items as per existing make and model for DG set 7.5 KVA to 30 KVA capacity, complete all as specified and directed.

All as per Srl Item No. 87 here-in-before but DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 87 here-in-before but DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 87 here-in-before but DG set 320 KVA to 500 KVA, complete all as specified and directed.

S&F in replacement of automatic voltage regulator from the authorised dealer with all connected items as per existing make and model for DG set 7.5 KVA to 30 KVA capacity, complete all as specified and directed.

All as per Srl Item No. 91 here-in-before but DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 91 here-in-before but DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 91 here-in-before but DG set 320 KVA to 500 KVA, complete all as specified and directed.

S&F in replacement of lubrication oil temp sensor/ fuel level sensor from the authorised dealer with all connected items as per existing make and model for DG set 7.5 KVA to 30 KVA capacity, complete all as specified and directed.

All as per Srl Item No. 95 here-in-before but DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 95 here-in-before but DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 95 here-in-before but DG set 320 KVA to 500 KVA, complete all as specified and directed.

S&F in replacement of coolent temperture sensor from the authorised dealer with all connected items as per existing make and model for DG set 7.5 KVA to 30 KVA capacity, complete all as specified and directed.

All as per Srl Item No. 99.00 here-in-before but DG set 40 KVA to 63 KVA, complete all as specified and directed.

All as per Srl Item No. 99.00 here-in-before but DG set 100 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 99.00 here-in-before but DG set 320 KVA to 500 KVA, complete all as specified and directed.

S&F in replacement of coupling flanged type from the authorised dealer with all connected items as per existing make and model for DG set 7.5 KVA to 30 KVA capacity, complete all as specified and directed.

All as per Srl Item No. 103.00 here-in-before but DG set 40 KVA to 100 KVA, complete all as specified and directed.

All as per Srl Item No. 103.00 here-in-before but DG set 200 KVA to 500 KVA, complete all as specified and directed.

All as per Srl Item No. 106.00 here-in-before but suitable for capacity 24 Volts.

S&F in replacement for phase indicator LED lamp with holder in different colours i.e. Red, yellow & green , complete all as specified and directed.

S&F in replacement for battery charging alternator 12/24 Volt suitable for 1500 RPM DG set as per exiting complete all as specified and directed.

M&L in replacement for PCB assembly control PCC 1301, Item Code No. 0327-1513-01 suitable for Cummins Engine DG sets complete all as specified and directed.

M&L in replacement for display control assembly, Item Code No. 0300-6014 suitable for Cummins Engine DG sets complete all as specified and directed.

S&F in repair for broken hinges for DG set door as per existing size and make of DG set, complete all as specified and directed by the Engr-in-Charge.

Repair to broken door DG set capacity from 200 KVA to 500 KVA by welding including complete denting painting with replacement of nut, bolt, hinges, complete all as specifie directed by Engr-in-Charge.

All as per Srl Item No. 115 here-in-before but for DG set 40 KVA to 160 KVA.

S&F in repair for aluminium tubular lugs of cable size 10 Sqmm to 16 Sqmm, complete all as specified and directed by Engr-in-Charge.

S&F in repair for aluminium tubular lugs of cable size 25 Sqmm to 50 Sqmm, complete all as specified and directed by Engr-in-Charge.

S&F in repair for aluminium tubular lugs of cable size 70 Sqmm to 120 Sqmm, complete all as specified and directed by Engr-in-Charge.

S&F in repair for aluminium tubular lugs of cable size 150 Sqmm to 300 Sqmm, complete all as specified and directed by Engr-in-Charge.

S&F in repair for copper lugs of cable size 10 Sqmm to 16 Sqmm, complete all as specified and directed by Engr-in-Charge.

S&F in repair for copper lugs of cable size 25 Sqmm to 50 Sqmm, complete all as specified and directed by Engr-in-Charge.

S&F in repair for copper lugs of cable size 70 Sqmm to 120 Sqmm, complete all as specified and directed by Engr-in-Charge.

S&F in repair for Onload change over switch of sheet steel enclosure confirming SS Enclosure, front operated 4Pole 415 V, 50 Hz of Capacity 160 Amps, complete all as specified and directed.

S&F in repair for Onload change over switch of sheet steel enclosure confirming SS Enclosure, front operated 4Pole 415 V, 50 Hz of Capacity 200 Amps, complete all as specified and directed.

S&F in repair for Onload change over switch of sheet steel enclosure confirming SS Enclosure, front operated 4Pole 415 V, 50 Hz of Capacity 400 Amps, complete all as specified and directed.

M&L for replacement of battery terminals brass with steel nuts, bolts & washers, complete all as specified and directed.

S&F in repair for off load change over switch having sheet steel enclosure, side handle operated 4 Pole 415 V, 50 Hz of Capacity 200 Amps, complete all as specified and directed.

S&F in repair for off load change over switch having sheet steel enclosure, side handle operated 4 Pole 415 V, 50 Hz of Capacity 400 Amps, complete all as specified and directed.

M&L & T&P for shifting of floor mounted DG Set including disconnecting LT cable & reconnecting at new location within range of 5.0 Kms in hired transport and testing, complete all as specified and directed.

VOLTAGE STABILIZERS Repair and overhauling of defective servo voltage stabilizer of any make and capacity upto 25 KVA, 3 Phase 415 by taking out stabilizer cover and testing after necessary repair with providing unserviceable control wiring of suitable size PVC insulated copper conductor cable including cables lugs, connectors, channels etc, complete all as specified and directed. Note:- Cost of copper wire shall be deemed to be included in the quoted rate.

All as per Srl Item No. 131 here-in-before but capacity of stabilizer above 50 KVA and up to 100 KVA, complete all as specified and directed.

All as per Srl Item No. 131 here-in-before but capacity of stabilizer above 125 KVA and up to 300 KVA, complete all as specified and directed.

S&F in replacement of analog voltmeter of size 72 x 72 mm range 30 to 300 volts, complete all as specified and directed.

S&F in replacement of printed control card circuit suitable for servo voltage stabilizers of capacity upto 100 KVA as per existing make, complete all as specified and directed.

S&F in repair for holder for printed control card circuit suitable for servo voltage stabilizer capacity 25 KVA to 200 KVA including connections by soldering complete all as specified and directed.

S&F in repair for servo motor single phase AC 230 volts suitable to work with voltage stabilizer upto 50 KVA capacity as per eexisting make with torque up to 5 Kg/CM, complete all as specified and directed.

All as per srl item No 137 here-in-before but stabilizer above 50 KVA capacity above with torque above 5Kg/CM upto 12 Kg/CM, complete all as specified and directed.

S&F in replacement of dimmer stat suitable for voltage stabilizer of any capacity upto 25 KVA of any make to match with existing system, complete all as specified and directed.

All as per Srl Item No. 139 here-in-before but for capacity of motor 50 KVA, complete all as specified and directed.

All as per Srl Item No. 139 here-in-before but for capacity of motor 100 KVA, complete all as specified and directed.

All as per Srl Item No. 139 here-in-before but for capacity of motor 300 KVA, complete all as specified and directed.

Supply and filling in replacement of new transformer oil of dielectric strength not less than 40 KV to various voltage stabilizers, complete all as specified and directed.

M&L for disconnecting of all connectios & nut, bolts of servo voltage stabilizer of capacity upto 50KVA and taken out to workshop for rewinding of primary and secondary burnt winding with super enamelled copper winding wire of size and gauge as per existing. Necessary T&P for dismantling and re-installation or servo voltage stabilizer and transportation from existing site to workshop and back to be deemed in quoted rate. After rewinding the servo voltage stabilizer will be tested to the entire satisfaction of the engr-in-charge. Note:- Super enamelled copper windind wire will be measured and paid separetaly under relevant item.

All as per Srl Item No. 144 here-in-before but for capacity above 50 KVA to 200 KVA, complete all as specified and directed.

All as per Srl Item No. 144 here-in-before but for capacity above 200 KVA to 300 KVA, complete all as specified and directed.

Supply only super enamlled copper winding wire of size and gauge as per existing make and capacity of servo voltage stabilizer including insulation, varnishing, drying for Srl item nos. 144 to 146, complete all as specified and directed.

S&F in replacement for LED street light fitting 35 watts dusk and down type, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and after taking down old unserviceable light fitting of any type complete all as specified and directed.

S&F in replacement for LED street light fitting 40 watts dusk and down type, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and after taking down old unserviceable light fitting of any type complete all as specified and directed.

S&F in replacement for LED street light fitting 45 watts dusk and down type, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and after taking down old unserviceable light fitting of any type complete all as specified and directed.

S&F in replacement for LED street light fitting 60 watts dusk and down type, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and after taking down old unserviceable light fitting of any type complete all as specified and directed.

S&F in replacement for 180 watt LED flood light luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection complete with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc at any height providing clamps, nuts, bolts, and washers etc after taking down old unserviceable flood light fitting of any type complete all as specified and directed.

S&F in replacement for 210 watt LED flood light luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection complete with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc at any height providing clamps, nuts, bolts, and washers etc after taking down old unserviceable flood light fitting of any type complete all as specified and directed.

S&F in replacement for decorative LED Bollard light with opal diffuers and aluminium reflector outdoor type LED Bollard light 8W, IP 65 lihgt including all accessories and connecting materials such as clamps, brackets, nut bolts reducer etc with base PCC 1:2:4 fixed on wall/floor and making electrical connection with copper cable, complete all as specified and directed.

S&F LED 10 watts bush and spike light luminairewith IP-65 protection complete with all accessories duly prewired and connecting with PVC insulated, sheathered flexible copper conductor cable 3 core 0.5 sq mm of adequate length from looping box to light fitting including removing old unserviceable items complete as in repair all as specified and directed by Engineer -in-charge

S&F in repair for post top lantern light fitting 35 watts with cast aluminium spigot lid cover and clear acrylic cover with IP65 protection complete with all accessories including fixing arrangement on top surface of boundary wall or on pillar by providing GI pipe of suitable size and length as per site requirement and making good the distrubed portion to match with existing surface complete all as specified and directed.

Supply, laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 Sqmm 3.5 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands, including taking down old cable complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, brick cable cover and protection GI pipe shall be measured and paid separetly and length of cable shall be one length unless otherwise as directed by GE).

Supply, laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 Sqmm 4 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands, including taking down old cable complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, brick cable cover and protection GI pipe shall be measured and paid separetly and length of cable shall be one length unless otherwise as directed by GE).

Supply, laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 Sqmm 4 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands, including taking down old cable complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, brick cable cover and protection GI pipe shall be measured and paid separetly and length of cable shall be one length unless otherwise as directed by GE).

Supply, laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 6 Sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands, including taking down old cable complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, brick cable cover and protection GI pipe shall be measured and paid separetly and length of cable shall be one length unless otherwise as directed by GE).

M&L for GI bracket pipe of size 25mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type and the GI bracket shall be fixed on wall/pole surfaces by providing suitable MS iron 25x4 mm clams 2 Nos of 25 cm long duly to the bracket pipe and painting to MS clamps and fixing with necessary suitable nuts, bolts and washers and after taking down old unserviceable GI brakcet of any type complete all as specified and directed.

S&F for FRP looping box of size 200x140x95 with aluminium bus bar (04 Nos) 100 Amps capacity connector and comprising oF MCB SP 6 Amps, ISI marked 240 V, 'C' series/curves complete with including providing GI calmps, nuts bolts etc suitable for fixing on PCC pole/wall/steel tubular poles etc after taking down old unserviceable looping box of any type complete all as specified and directed.

S&F for copper conductor cable, PVC insulated, sheathed flexible, multistranded ISI marked 1100 volts grade 3 core 1.5 sqmm and including connection and testing and after taking down old unserviceable copper conductor cable complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth in soft loose soil for foundation, etc, or for shafts, wells, drain pipes n.exc 10 Sqm on plan and getting out, complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick ,complete all as specified and as directed.

Removing excavated material ,not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting poin, complete all as specified and directed.

M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed. (Note: Punned thickness of sand shall be measured and paid).

Supply and laying unreinforced precast factory made concrete cable cover , class LV, Type-I, flat, size 250mm x 150mm x 40mm for protection to cable of , complete all as specified and as directed.

S&F in replacement for 50 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors, complete all as specified and directed.

S&F in replacement for rigid non-metallic PVC conduit 25mm dia medium grade including conduit accessories for encasingthe cable from looping box to street light fittingd on PCC poles / wall surfaces as per site requirement with necessary base saddles, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m deep below normal ground level connected to and including 25X4mm thick galvanised iron strip by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as specified in electrical plate No 3 of SSR (2009) part-I including 40mm bore GI pipe light grade for protection of earth strip and PCC 1:2:4 type B-1 as in pit, Precast RCC earth pit cover 8 cm thick reinforced with 8mm dia TMT bars @150mmc/c and two handles, excavation and earth work in any type of soil and alternate layers of charcoal, common salt and 20mm bore galvanised medium grade steel tubing for watering with one end fixed with cast iron funnel and wire mesh and testing on completion, including taking down old earthing complete all as specified and directed. Note:-Earthwork, Earth strip and protection pipe upto board is included in the rate quoted.

KRISHNA ENGINEERING ENTERPRISES (BID ID -3127404)

M/S PARSHOTAM KUMAR GUPTA (BID ID -3128553)