REPAIR / REPLACEMENT OF EXTERNAL WATER SUPPLY DISTRIBUTION CPVC/ CI/ GI PIPE LINE, FOOT VALVES, SLUICE VALVES, PUMP MOTOR AND OTHER CONNECTED ITEMS UNDER GE KAMPTEE

Amount

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10 sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and directed.

Removing excavated materials not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Cutting of cast iron pipe mains 300mm bore for insertion of tees, collars, sluice valves, etc including dewatering work required for working water pipe lines complete all as specified and directed.

All as per item No 4 above but 200mm bore complete all as specified and directed.

All as per item No 4 above but 150mm bore complete all as specified and directed.

All as per item No 4 above but 100mm bore complete all as specified and directed.

Taking up or down cast iron pipe of tyton joint type from trenches including dismantling tyton joints type & removing for disposal for the pipes of 150mm bore complete all as specified and directed.

All as per item No 8 above but 100mm bore complete all as specified and directed.

All as per item No 8 above but 80mm bore complete all as specified and directed.

Supplying and laying in trenches DI pipe 150mm bore, K-9, centrifugally cast, with flanged end, class LA complete all as specified and directed.

All as per item No 11 above but 100mm bore complete all as specified and directed.

All as per item No 11 above but 80mm bore complete all as specified and directed.

M&L for tyton rubber gasket joints for 300mm bore complete all as specified and directed.

M&L for tyton rubber gasket joints for 150mm bore complete all as specified and directed.

M&L for tyton rubber gasket joints for 100mm bore complete all as specified and directed.

M&L for tyton rubber gasket joints for 80mm bore complete all as specified and directed.

M&L for DI fitting for spigot & socket end pipes such as bends (any type, radius and angle), tapers any type (Straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, `Y` junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs and mechanical joints etc upto 150mm bore including removing/ dismantling of old CI fittings complete all as specified and directed.

S&F in repair CI mechanical joint socket type complete with jointing materials such as rubber gaskets, nut bolts, & washers for the cast iron pipe of 300mm bore complete all as specified and directed.

All as per item No 19 above but 200mm bore complete all as specified and directed.

All as per item No 19 above but 150mm bore complete all as specified and directed.

All as per item No 19 above but 100mm bore complete all as specified and directed.

All as per item No 19 above but 80mm bore complete all as specified and directed.

S&F in repair CI mechanical joint adapter type complete with jointing materials such as rubber gaskets, nut bolts, & washers for the cast iron pipe of 200mm bore complete all as specified and directed.

All as per item No 24 above but 150mm bore complete all as specified and directed.

All as per item No 24 above but 100mm bore complete all as specified and directed.

All as per item No 24 above but 80mm bore complete all as specified and directed.

Taking out unserviceable CI sluice valve, 300 mm bore, double flanged from the existing pipe line by unscrewing nuts, bolts and removing of rubber gasket joints including de-watering work required for working pipe complete, refacing, regrinding and refixing complete all as specified and directed.

All as per item No 28 above but 200 mm bore complete all as specified and directed.

All as per item No 28 above but 150 mm bore complete all as specified and directed.

All as per item No 28 above but 100 mm bore complete all as specified and directed.

All as per item No 28 above but 80 mm bore complete all as specified and directed.

S&F sluice valve, 300mm bore, flanged and drilled type PN-1.0, ISI marked with CI hand wheel and stainless steel spindle of IS:6603 bronze rings complete with jointing and jointing materials such as bolts, nuts, washers and rubber gaskets complete all as specified and directed. Make:- Kirloskar Brothers Limited or equivalent.

All as per item No 33 above but 200 mm bore complete all as specified and directed.

All as per item No 33 above but 150 mm bore complete all as specified and directed.

All as per item No 33 above but 100 mm bore complete all as specified and directed.

All as per item No 33 above but 80 mm bore complete all as specified and directed.

Taking out unserviceable CI foot valve, S&F in repair CI foot valve ball type double end flanged/ drilled PN-0.2, ISI marked, with including necessary cutting of existing suction pipe line of any type and welding, jointing and jointing materials such nuts, bolts, washers, flange and rubber gaskets etc for the pipe of 150mm bore with reinforced rubber nitrile ball complete all as specified and directed. Make: Normex, Kirloskar or equivalent

All as per item No 38 above but 100 mm bore complete all as specified and directed.

All as per item No 38 above but 80 mm bore complete all as specified and directed.

Taking out unserviceable CI Non-return valve, S&F in repair CI Non-return valve Ball type double end flanged/ drilled, PN-1.0 with including necessary cutting of existing delivery pipe line of any type and welding, jointing and jointing materials such nuts, bolts, washers, flange and rubber gaskets etc for the pipe of 200mm bore with reinforced rubber nitrile ball complete all as specified and directed. Make: Normex, Kirloskar or equivalent

All as per item No 41 above but 150 mm bore complete all as specified and directed.

All as per item No 41 above but 100 mm bore complete all as specified and directed.

All as per item No 41 above but 80 mm bore complete all as specified and directed.

Taking up or down GI tubing and fitting, 80mm bore, from wall/ trenches and disconnecting from main distribution lines including necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and directed.

All as per item No 45 above but 50 mm bore complete all as specified and directed.

All as per item No 45 above but 40 mm bore complete all as specified and directed.

All as per item No 45above but 25 mm bore complete all as specified and directed.

All as per item No 45 above but 20 mm bore complete all as specified and directed.

All as per item No 45above but 15 mm bore complete all as specified and directed.

Re-laying only in trenches trenches / fixing in wall GI tubing, 80mm bore, medium grade with all fitting complete all as specified and directed.

All as per item No 51 above but 50 mm bore complete all as specified and directed.

All as per item No 51 above but 40 mm bore complete all as specified and directed.

All as per item No 51 above but 25 mm bore complete all as specified and directed.

All as per item No 51 above but 20 mm bore complete all as specified and directed.

All as per item No 51 above but 15 mm bore complete all as specified and directed.

Supply and laid in trenches GI tubing, 80mm bore, medium grade with all fitting complete all as specified and directed.

All as per item No 57 above but 50 mm bore complete all as specified and directed.

All as per item No 57 above but 40 mm bore complete all as specified and directed.

All as per item No 57 above but 25 mm bore complete all as specified and directed.

All as per item No 57 above but 20 mm bore complete all as specified and directed.

All as per item No 57 above but 15 mm bore complete all as specified and directed.

S&F in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 50mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

All as per item No 63 above but 40 mm bore complete all as specified and directed.

All as per item No 63 above but 25 mm bore complete all as specified and directed.

All as per item No 63 above but 20 mm bore complete all as specified and directed.

All as per item No 63 above but 15 mm bore complete all as specified and directed.

S&F in repair Ball valves high pressure, with polythene float and flynut complete, screwed for iron pipe and fixed complete of size 25mm dia complete all as specified and directed.

S&F in repair ball valves high pressure, with polythene float and flynut complete, screwed for iron pipe and fixed complete of size 20mm dia complete all as specified and directed.

M&L for fabrication any type of MS pipe with flange, angle iron frame for valve chambers, cover made out of MS sheet of any thickness and angle iron of any size with drilled hole and grouting in existing brick work with handles for opening of valves and with locking arrangement complete all as specified and directed.

M&L for 110mm bore unplasticised PVC pipes of pressure rating 10 kg/sqcm with all fittings and fixtures laid in trenches complete all as specified and directed.

All as per item No 71 but of size 50 mm bore complete all as specified and directed.

All as per item No 71 but of size 25 mm bore complete all as specified and directed.

M&L for PCC 1:2:4 with 20mm aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings complete all as specified and directed.

M&L for painting of different sizes of pipe inlet and outlet, climbing lader, pumps, motors, pressure filteration plant, sluice valves, panel, trench cover pump house as per colour code with one coat of primer and two coat of synthetic enamelled black paint as existing colour complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 25x4 mm strip dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

M&L for uprooting vegitation, bushes, creepers, weeds including trimming of branches of trees touching inside sub stations/pumping stn/over head reservoir area, under ground sump area with the help of spade, crowbar, axes or any other tools mannually complete clean complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, adjustable type, but 200 Amps complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, adjustable type, but 250 Amp complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 40,018.00]

Manoj Jethani

Paragon Electrotechnics

Bidder Name

Paragon Electrotechnics

chronicle enterprises

Manoj Jethani