ADDITION, ALTERATION TO CERTAIN BUILDINGS IN NP AREA, AKASH NAGAR AND 509 AREA UNDER GE (AF) LOHEGAON AT AIRFORCE STATION PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.

M&L for 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:3 complete all as specified and directed.

M&L for Non - skid coloured joint free Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 20 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 20 mm thick screed bed in CM (1: 6) complete all specified and directed.

Ditto all as per Ser Item No 06.00 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as specified and directed .

M&L Glazed Ceramic digital wall Tiles, joint free,450X300X7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. Note : wall tiles shall be in concept design approved by Engr-in-Charge

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 20mm thick in cement motar 1:4 complete all as specified and directed.

M & L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with rendering of 10mm thick plaster in CM 1:3 all as specified and directed.

M&L granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

Taking up or down steel tubing and connections, incl removal 15mm dia bore complete all as specified and as directed.

Taking up or down steel tubing and connections, incl removal 20 mm dia bore complete all as specified and as directed.

Taking up or down steel tubing and connections, incl removal 25 mm dia bore complete all as specified and as directed.

S&F for GI tubing 15mm dia bore medium grade with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.

S&F for GI tubing 20mm dia bore medium grade with all fittings & fixtures complete laid in trenches complete all as specified and as directed.

S&F for GI tubing 25mm dia bore medium grade with all fittings & fixtures complete laid in trenches complete all as specified and as directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including connection of outlet of WC to main pipe and concrete bedding in CM (1:3) complete all as specified and as directed.

S&F in repair 15 mm dia PVC connection 45 cm long including check nuts etc complete all as specified and directed

S&F in repair for 15 mm bore bib tap fancy type chromium plated cast copper alloy with wall flange complete all as specified and directed.

Demolition RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed

S&F rotational moulded polyethylene double layer water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top universal thread type lid) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and as directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, CP Pillar Tap 15mm fancy type, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed.

S & F in repair stop valves/ angle valve 15 mm bore fancy type, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions concealed type and fixed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S &F in repair chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed bothends for iron pipe 25 mm bore and fixed complete all as specified .

S &F in repairs chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F CP wall mixer with L bend provision of head shower for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste pipe and coupling and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F CP Towel Ring (Minimum weight 90gms) complete all as specified and as directed.

S&F CP soap case all as specified and directed

S&F stainless steel kitchen plate rack of 0.65 mm thick of approved make with plugs, washers, over all size 750mm x 600m complete all as specified and directed complete all as specified and as directed.

Demolition and breaking up drain pipes Upto 150 mm (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specifed and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specifed and directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specifed and directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 110mm dia complete all as specifed and directed.

S &F 110mm dia of PVC (SWR) branch piece, single (Double Y) equal or unequal with oval and access door all as specified and directed.

S &F 110mm dia of PVC (SWR) branch piece, single (Single T) equal or unequal with oval and access door all as specified and directed.

S &F 75mm dia of PVC (SWR) branch piece, single (Double Y) equal or unequal with oval and access door all as specified and directed.

S &F 75 mm dia of PVC (SWR) branch piece, single (Single T) equal or unequal with oval and access door all as specified and directed.

M&L for PVC (SWR) vent cowl of 110mm dia complete all as specifed and directed.

Taking down chowkhat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each complete all as specifed and directed.

Taking down chowkhat with shutter without taking out shutter from the frame n.exc 1.5 Sqm complete all as specifed and directed.

Taking down Shutters of description exc 1sq.m and n exc 2 sq. m each complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specifed and directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

Supply only 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and directed.

S & F stainless steel butt hinges of size 100mm and fixed complete all as specified and directed.

S&F 150 mm long, Aluminium anodised,barrel tower bolts of extruded section fixed complete all as specified and as directed.

S&F 200 mm long, Aluminium anodised,barrel tower bolts of extruded section fixed complete all as specified and as directed.

S&F 125 mm long, Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm size handles, Extruded aluminium alloy handles, fabricated type,anodised complete all as specified and as directed.

S&F Mild steel 300mm sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifed and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S & F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S &F of 125mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M & L for 125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class Hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

M & L for 2nd class hard wood Plain framed, panelled shutter 35 mm (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size ofrail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats complete all as specified and directed .

Taking down Shutters of any description exc 1 sqm and n exc 2 Sqm each and refixing in same opening complete all as specified and directed

S & F powder coated aluminium frame to (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply only sheet glass 3.0 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

M & L for 6mm thick teak wood lipping over 18/19 mm block board/ particle board fixed with nails etc. complete all as specified and directed.

S&F almunium powder coated louvers for ventilltor 4/6 blades fixed to almunium frame complete all as specified and directed .

M & L for Block boards, 18mm/19mm grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as directed by Engr-in-charge.

M&L for 0.90mm thick decorative laminate type – I of surface finish (colour & pattern as approved) fixed with approved adhesive as per manufacturer’s instruction finished to approved size for working table all as directed by Engineer-in-Charge.

M&L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in I st class H.W. sectional area n. exc. 3 Sqm.

S&F in repairs 150 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F in repairs 150 mm size handles, Extruded aluminium alloy handles, fabricated type,anodised type fixed complete all as specified and as directed.

S & F in repair 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and directed.

S&F in repairs Mild steel sliding 300mm door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate and fixed complete all as specifed and directed.

S & F Harrison rail 20 mm Dia(Curtain rods), of stainless steel, with fixing brackets, stops, rollers etc.all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection

M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) using 20mm graded aggregate and set in CM (1:6).

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete

M & L rendering 10mm thick on surface of brick work/concrete surface in CM 1:6 and is to be finished even and smooth with out using extra cement complete all as specified directed

M & L for 5mm thick cement plaster in CM 1:3 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.

M & L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces with WPC 3% by weight of cement or as per manufacturer instructions and finishing the surface even and smooth (without using extra cement) etc. Note : (WPC will be measured and paidseperately)

Cutting down the plant/trees of girth n exc 15cm, from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, applying emulsion of non toxic chemicals including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located upto a ht of 7.50 mtrs from GL.etc. complete all as specified and directed.

Demolition of Brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for RCC 1:1.5:3 (Nominal Mix) using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165

M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelve including sup- ports, overhangs, etc. also splays between floors and beams, etc.of rough finished of concrete complete all as specified & directed

M & L for Preparation of old painted wooden surfaces of any description having width/girth exceeding 10cm and applying one coat of synthetic enamel paint for material and labour complete.

M & L for Preparation of new wooden surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over pink primer for material and labour complete.

Preparation of new painted surfaces of steel and applying two coat of synthetic enamel paint over one coat of red oxide to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M & L for prepartion of newly plastered surfaces and applying three coat of white wash complete on ceiling complete all as specified and directed.

M & L for prepartion of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturer's specification over 3mm thick putty in three layers complete all as specified and directed.

M & L for complete removal of existing treatment of walls plastered or unplastered, Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturer's specification over a coat of 3mm thick putty in three layers including making good the surface complete all as specified and directed.

M & L for complete removal of existing treatment of Ceiling plastered or unplastered, Washing, rubbing down and stopping of distempered and painted surfaces and applying three coats of white wash complete all as specified and directed.

M & L for prepartion of newly plastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint ( Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M & L for complete removal of existing treatment of walls plastered or unplastered applying Two or more coats of 100% Premium acrylic emulsion paint ( Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M&L for 75mm thick PCC in (1:2:4) type B2 using 20mm graded stone agg as in sunken floor complete all as specified and as directed.

M & L rendering 10mm thick on surface of brick work/concrete surface in CM 1:3 with WPC 3% by weight of cement being used or as per manufacturer instructions neeru finish to plastering as specified with using extra cement complete all as specified & directed Note : WPC shall be measured and paid separately

M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as directed.

M&L for PCC 1:1½ : 3 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed.

M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as directed

M&L for polythene flim black 50 micron laid in sunken floor complete all as directed

M&L for spout of 50mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound 3% by weight of cement being used or as per manufacturer instructions finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)

Taking down existing roof treatment of any type any description and disposing rubbish out of premises complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick works / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 4 with using WPC @3% by wt of cement or as per manufacture instructions complete all as specified and as directed ( WPC shall be measured and paid separately)

M & L for preparation of newly plastered surface and applying oil based bituminous primer @ 0.3ltr/sqm complete all as specified and directed.

M&L for APP based polymeric membrane of weight not less than 3.5kg/sqm and thickness not less than 3mm thick reinforcement with polyester non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on primed surface and applying bituminous based aluminium paint @ 200gm/sqm in two coats on APP membrane complete all as specified and directed.

Supply only integral waterproofing compound.

M&L cement concrete1:2:4, type B0 using 12.5mm graded stone aggregate as in roof rounded or chamfered in edges with out using extra cement complete all as directed by Engr-in-charge.

M & L for 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M & L for Providing, cement concrete type B0, 1:3:6 (12.5 mm graded aggregate)for chawkat filling as required all as specified and directed by engineer in charge.

S&F in repair pvc SWR floor trap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

S & F Grating doom 100mm dia of Stainless steel with holes for waste pipes all as specified and directed.

S & F Grating doom 100mm dia of stainless steel without holes all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and as directed.

M&L Green Marble work other than white or black18 to 20 mm thick (table rubbed and polished) in cooking platforms, jambs,cills and like over in single peice and including provision of 10mm thick cement mortar (1:4) including pointing in colour cement (1 :2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L for Providing cement concrete type B0 1:2:4 using 12.5 mm aggregate in win- dow or door cills, lintels,bressumers, steps, quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match etc.complete all as specified and directed.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Dismantling of PVC water tanks of exc 250 and n.exc 500 ltr capacity and removing to store and all as specified and directed by Engr-in-Charge.

S&F figured glass pin headed 3.0 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving's not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size rubber moulded of any color confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement & pigment complete all as specified and directed.

M&L Sand filling uder precast concrete inter locking paver floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 75 thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) laying as in Sub base complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. including sorting out serviceable and unserviceable light fitting and keep serviceable fitting in safe guard for reuse as required on site.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLSH PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and including moduler PVC switch box , modular switch box cover plate, frame for housing switches/ sockets, regulator etc all as directed by Engr-In-charge.

One light point controlled by one switch.

One light point controlled by two two way switches

One bell point one way switch

One Exhaust/Wall mounted /Ceiling fan point controlled by one regulator/switch

One 3 pin socket 5 A on independent board.

One 3 pin socket 5 A on same board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded FRLSH PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping, ISI Marked complete for housing one 15 A Switch / sockets complete including moduler PVC switch box , modular switch box cover plate, frame for housing switches/ sockets, regulator etc all as directed by Engr-In-charge.

S & F Sub Main Wiring with FRLSH PVC Insulated multistranded copper conductor wires of size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire in casing caping including taking out old US sub main wiring complete as directed.

S & F Sub Main Wiring with FRLSH PVC Insulated multistranded copper conductor wires of size 2x 4.0 sq. mm + 1x 4 sq. mm earth wire in casing caping complete as directed. Note for Ser Item No. 135.00 & 136.00: One run of phase wire one run of Neutral wire and one run of Earth wire and one run of casing and capping shall be meassured and as one length.

S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps.including fixing concealed in wall / wall mounted and making good the disturbed surface complete all as directed

Supply and fix sheet metal enclosure MCB DB double door SPN 12 way 230 V with neutral link including fixing on wall dtone masonary / brick masonary and making good the disturbed surface making all nacessary incoming and out going connections using proper size copper thimbles incl taking out old SPN DB complete all as required on site all as directed

Supply and fix MCB SPN 40 Amp, 230 volt 'C' series complete

S&F MCB SP 240 volt 6 to 32 A 'C' series complete

Supply and fix Modular switch 1 way 6A, 1 module

Supply and fix modular Socket, 6A - 2/3 pin combined 2 module

Supply and fix Modular switch 1 way 16A, 1 module

Supply and fix modolar Socket 6A/16A - 2/3 pin combined 2 module

Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm ISI marked

Supply and fix Modular Bell push 6A 1 module

Supply and fix call bell electric 230V single pole ding dong type complete as directed.

S & F modular Fan step regulator, 120W - 2 module

Supply and fix Modular switch 2 way 6A, 1 module

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fix LED tube light fitting comprising of 20 watt aluminium T-8 LED tube rod 4 feet long with inbuilt driver and accessories, the tube rod shall have efficacy of 100Lm/watt, including providing prewired CRCA industrial box type batten with holders for fixing LED tube rod along with provision of 02 Nos PVC square block for fixing of the fitting with necessary screws, including connecting up with three core 0.5 sqmm flexible copper conductor cable ceiling rose to fitting terminal complete all as specified and directed.

S & F LED light fitting PDC housing opal diffser IP 65 Potection 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F angle / batten holder insulated body with back plate for batten fittings, ISI marked complete all as specified and directed.

Supply and fix exhaust fan heavy duty with steel body 300 mm sweep copper winding single phase complete with frame , blades and louvers shutter made out of aluminium sheet of 0.5 mm thick, voltage 230V, 50 Hz, RPM 900, 1.5 Sq mm 3 core wire from ceiling rose to fan, including making suitable hole in stone masonary wall and making good the disturbed surface as existing complete in all respect all as specified and directed.

Taking down ceiling fan single phase 240 V 1200 mm /1400mm sweep from the site incl dismantling blades and removing fan and blade to wksp including disconnecting carefully and painting with synthetic enamel paint by spraying including filling cavities with filler two coat after cleaning all dust etc. replacement of 2.5 microfd capacitor and hanging in original position connecting up including provision of cable from ceiling rose to connector of fan complete as directed.

Supply & fix (in Repalcement) energy saving and environmental frindly long life LED Street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics IP 65/IP66 road way luminaries with LEDs as light source and lens toughened glass cover and impact resistance of IK07 and electronic driver fixed on pole/wall with and including suitable dia size bracket as per manufacturer recommendation, bracket complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified.

M&L for providing earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised wire4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point, providing charcoal and common salt all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including galvanised iron wire 4 mm with GI protection pipe of 15 mm medium grade 7.5 meter long, etc complete all as specified.

Supply, installation and commisioning of electric water heater, storage type with ABS body water tank and copper heating element upto 2KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, steel braided with check nut washers connection pieces, anchor fastener for mounting geyser complete all as specified and directed.

Taking out old unserviceable LT cable and Supply ,Laying,and testing LT under ground cable 35 Sq mm 3.5 core, 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised round steel wire or steel strip, electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe etc

Ditto all as per Ser Item No. 159.00 above but for UG cable 16 Sq mm 2 core

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc. in any type of soil all as specified and directed by Engr-In-Charge at Site

Returning/ Refilling in of excavated soil including spreading levelling and well ramming in layers not exc 25 cm each any type of soil

Removing the Excaveted material to a distance not exceeding 50 mtrs from the starting point and depositing at a height not exceeding 1.5 m above ground level.

Supply and fix double walled corrugated pipe class SN4 75mm dia including laying in ground and fix along the wall as per direction of Engr-In-Charge.

Supply, Install, Test and Commissioning of wall mounted LT feeder pillar box of indoor type fabricated out of 2.00 mm thick CRCA sheet CPRI approved complete with powder coating with seven tank process mounted on wall duly anchored including taking out old Meters and refixing in new box and making all nacessary connections with the following:- (a) Copper bus bar 200 Amp (R Y B & N) with coloured heat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted on DMC/epoxy insulator (not less than 50mmx50mm conicle type at a maximum interval of 500 mm- 01 Set. (b ) MCCB FP 100 Amps 25 KA - 01 No (Main incoming) (b) MCB SPN 40 Amps 06 Nos (c) Separate chamber to fix 04 Nos Electric Meters and MCBs with transparent sheet suitable to check meter readings

Supply, Install, Test and Commissioning of wall mounted LT feeder pillar box of indoor type fabricated out of 2.00 mm thick CRCA sheet CPRI approved complete with powder coating with seven tank process mounted on wall duly anchered including taking out old Meters and refixing in new box and making all nacessary connections with the following:- (a) Copper bus bar 200 Amp (R Y B & N) with coloured heat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted on DMC/epoxy insulator (not less than 50mmx50mm conicle type at a maximum interval of 500 mm- 01 Set. (b) MCCB FP 125 Amps 25 KA - 01 No (Main incoming) (b) MCB SPN 40 Amps 12 Nos (c) Separate chamber to fix 08 Nos Electric Meters and MCBs with transparent sheet suitable to check meter readings . Note : for item 165 and 166: The layout drawing of panel shall be submitted and got approved from GE.

tulsani associates (BID ID -3169697)

SHAH BUILDERS (BID ID -3165826)

S.R.M.K Enterprises (BID ID -3169535)

GRACE CONSTRUCTIONS (BID ID -3169505)