Repairing of EI and Fans in CSC at TE Bldg Saraswati Nagar Balaghat MP

Amount

SUB HEAD-II: WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Group C

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

4 x 1.5 sq. mm

5 x 1.5 sq. mm

6 x 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

15/16-amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

6 Module (100mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing Two Module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 3 pin 5 Amp Ceiling Rose on the existing junction box/wooden block including connection etc. as required.

SUB HEAD-III (Distribution System)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve SPN MCB complete with connections, testing and commissioning etc. as required.

SUB HEAD-VI (FAN & FITTINGS)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying Installation, testing and commissioning of following pre-wired, surface / recess mounted LED light fixture of all types, complete with all accessories, with integrated electronic driver , and lamps etc., suitable for operation on 230 Volts, 50Hz, Single Phase, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

600mm x 600mm (Nominal dimension) size ,42 Watt, Surface Mounted LED Luminaires in Metallic CRCA Powder Coated Housing , High efficiency Diffuser & integrated electronic driver (M/s Havells make Model PLANOSUR2X2PLS42WLED857S0720 or Similar Superior model of preferred make)

Supply, Installation, Testing and Commissioning of 4 feet, 20 Watts (+/- 2 Watts) energy efficient linear box LED batten light having 6500K colour temp., minimum 1900 Lumens, 95 Lumen/watt efficacy and 0.9 power factor along with all accessories suitable for operation on 230 Volts, 50 Hz Single Phase AC Supply complete as required.

Providing and fixing one no 400 MM sweep wall mounted fan, with suitable speed regulation and oscillation control switches, suitable for operation on 1 phase 50 Hertz AC supply with all accessories including making suitable fixing / mounting arrangement along with inter connection testing commissioning etc as required. [ Bajaj / Crompton / Havells or similar superior make]

Supplying of one no 8 mm dia 'S' type fan hook in ceiling including Cutting the Ceiling, tracing re-inforcement rod and fixing the hook in ceiling and making good the damages, painting with minor civil works complete etc as required at site .

SURENDER SINGH SOLANKI

ATUL TRADERS &CONTRACTOR PROP-ATUL MISHRA