Construction of Rain Water Harvesting tank at Veterinary Office, Campbell Bay, GNI.

Amount

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (a) 0.80 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. (a) 150 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (a) 110 mm diameter

Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (a) 40 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (a) Circular Tank

Making RCC framed staging with slab for placing water storage tank at a height of 1.50 metre and 3.0 x 3.0 mtr platform etc complete as per the direction of Engineer-in-charge.

Providing & Fixing 110 mm dia weather proof polyvinly chloride rain water filter consisting of stainless steel - 304 grade screen filter mesh of 240 micro with provision for 110 mm dia rain water inlet 110 mm dia clean water outlet and 20 mm drain outlet as per the direction of Engineer-in-Charge

Providing Cholorination tank which includes with the provision of PVC tank of 50 ltr. capacity with arrangement of CPVC pipe and valve connected with delivery pipe etc. All complete as per the direction of Engineer-in-Charge.

M/s CVR ENTERPRISES

Govinda Swamy Construction