JOB WORK

Operation No Operation Desc Note Text

10 INSPECTION R/M INSPECT THE RAW MATERIAL 0305001

20 MOVE MOVE THE PARTS TO VENDOR SITE

105 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P1A

110 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P2

120 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P3

130 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P4

140 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P5 & 03-05-048-P6

150 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P7

160 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P8 & 03-05-048-P9

170 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P10 & 03-05-048-P11

180 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P12 & 03-05-048-P12A

190 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P13 & 03-05-048-P13A

200 VENDOR SITE CARRY OUT THE MACHINING ,REF OPN DRG 03-05-048-P14

205 DRESS TO AVOID FOUL DRESS AND REMOVE THE MATERIAL CAREFULLY AT 2 LOCATIONS , WHERE BRACKET IS FOULING THE FHU BODY AND ENSURE THERE SHOULD BE A GAP OF MINIMUM 1mm AND CARE TO BE TAKEN BY MASKING TO AVOID BURRS , CHIPS SHOULD NOT ENTER INNER PORTION.

240 INSPECTION INSPECT 100%. AS PER COMP GWG

250 CRACK TEST PREPARE FOR CRACK TEST

260 INSPECTION INSPECT FOR CRACKS

270 INSPECTION INSPECT ISSUE SPL TAG

280 PROGRESS CREDIT TO INTERMEDIATE STORES

290 DEBURR AND CLEAN DEBURR AND CLEAN THE INTERNAL CORE PASSAGES

300 BOROSCOPE CHECK CHECK THE CORE HOLES USING BOROSCOPE

REFER OPN DRG 03-05-048/P14 A SHT 1/2 TO 2/2

305 DRESS TO AVOID FOUL CARRY OUT DRESSING OPN . BY USING SPECIAL ATTACHMENT TO DRESSING GUN HOLDER, REMOVE EXCESS MATERIAL DEPOSIT AT DIFFERENE OIL PASSAGES , CHECK THROUGH PASSAGES USING BOROSCOPE ,TILL GET THE INSPECTION ACCEPTANCE.

REFER OPN DRG 03-05-048/P14 A SHT 1/2 TO 2/2

REF SNAG- .............., SL No.OFHU ........................... AS PER ASSY REQUIREMENT

310 INSPECTION INSPECT

520 ASSEMBLY ASSEMBLY OF WIRE THRAD INSERT

REFER OPN DRG 03-05-048/P15 TO P18

530 INSPECTION INSPECT

540 PRESSURE TEST DUCT PRESSURE TEST AS PER ATP

REFER OPN DRG 03-05-048/P19 TO P25

550 INSPECTION INSPECT

560 DIS ASSEMBLY REMOVAL OF WIRE THREAD INSERTREFER OPN DRG 03-05-048/P26

570 INSPECTION INSPECT

580 PREPARATION OF NDT PREPARE THE PART FOR CRACK DETECTION AS PER

AeMPS 016 SENSITIVITY P-3/ NDT DATA CARD SKP-016

590 INSPECTION INSPECT FOR CRACKS

600 PROCESS SHOP CHROMIC ACID ANODISE ALL OVER THE PART AS PER AeMPS-012

610 INSPECTION INSPECT

620 ASSEMBLY ASSEMBLY OF PLUGS REFER OPN DRG 03-05-048/P27 TO P31

630 INSPECTION INSPECT

640 ASSEMBLY ASSEMBLY OF WIRE THREAD INSERTSREFER OPN DRG 03-05-048/P32 TO P39

650 INSPECTION INSPECT

660 ASSEMBLY ASSEMBLY OF BLANKS FOR PRESSURE TEST

REFER OPN DRG 03-05-048/P40 TO P48

670 INSPECTION INSPECT

680 PRESSURE TEST CARRYOUT PRESSURE TEST AS PER ATP

REFER OPN DRG 03-05-048/P49 TO P54

690 INSPECTION INSPECT

720 REMOVAL OF BLANKING REMOVAL OF BLANKS

REFER OPN DRG 03-05-048/P55 TO P63

730 INSPECTION INSPECT

740 ULTRASONIC CLEANING ULTRASONIC CLEANING USING ADROX 552

REFER OPN DRG 03-05-048/P64

750 INSPECTION INSPECT

760 ADOURMK871 NC SHOP ENGRAVE THE FOLLOWING DETAILS

3.BATCH NO. ETC AS PER COMP DRG 0305048

770 FINAL INSPECTION FINAL INSPECTION, IDENTITY PART NO, BATCH NO AND ISSUE TAG

MARK THE SL.NO AND PART NO ON THE INDICATED PLACE AS PER DRG 030-05-048(ISSUE-05)

780 STORE CREDIT SEND THE PARTS FOR PACKING WITH STORE RECEIPT

785 PACKING PACK AND PRESERVE AS PER HQI-T-008 CLASS-03

790 INSPECT PACKING INSPECT