PROVN OF SEPTIC TANK FOR 100 USERS AND SOAKAGE WELL FOR JCOS/OR LIVING BLOCK AT 8 ATAL AND PROVISION OF CHAIN LINK FENCING AND HARD STANDING AT SKP AND ADDN ALTN TO TOILET BLOCK AND FLOORING AT BLDG NO T-49 C ND 49 HAVLOCK LINE AND ADDN/ALTN OF IN

Amount

Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed.

M & L for RCC Conventional Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls, Base slab, Baffle walls and roof Slab including beams etc with Vent shaft, manhole openings with cover connection etc, complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 users. TD No 750 dt 21 3 2018.

M & L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M25 concrete including interceptiong chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnectiong pipes of RCC/ DWC complete filled with brick bats of size 2.4M dia x 6.0 M effective depth complete all as specified and directed (Drg No TD/ 576 dt 16.6.89).

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loos soil for foundation, etc. complete all as specified and directed

Excavation in trenches in soft/loose soil n.exc 1.5 m wide and n.exc 1.5 m depth and getting out complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil etc., returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M & L for PCC 1 : 4 : 8 type D2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; internal dia of pipe 150mm complete all as specified and directed.

M & L for cement concrete 1:2:4,Type B1(20 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for Reinforced concrete pipes, class NP3, laid and jointed complete with collars internal dia of pipe 150mm complete all as specified and directed.

M & L for Plain Cement concrete Type D2 1:4:8 (40 mm graded stone aggregate) as in foundations, filling and mass and sloping floor concrete complete all as specified and directed

M & L for Plain Cement concrete Type C2 1:3:6 (40 mm graded stone aggregate) as in as in surface channel , benching of mamhole/drain including necessary form work /mould etc complet all as specified and directed

M & L for Plain Cement concrete Type B0 1:2:4 (12.5 mm graded stone aggregate) as in Copings, kerbs or mud stops,rounded or chamfered on edges complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removal of excavated soil to a distance n. exc 50M and depositing where directed at a level not exc 1.5M above the starting point complete all as specified and directed.

Removal of excavated soil to a distance exc 250 but n. exc 500M and depositing where directed at a level not exc 1.5M above the starting point complete all as specified and directed.

Cutting into existing man holes for connection new drains internal dia of pipe 150 mm, making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) min cement concrete 1 : 2 : 4 type B1 smooth finished and reforming benching complete all as specified and directed.

M&L for brick work with fly ash bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 as in manhole/septic tank /soak well, drain etc and articles complete all as specified and directed.

M&L for brick work with fly ash bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 as in manhole/septic tank /soak well, drain etc and articles complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on any faces of brick wall or concrete surface in CM 1:4 finished fair and even without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick wall or concrete surface in CM 1:6 finished fair and even without using extra cement complete all as specified and directed.

M & L for 10 mm thick rendering in CM (1:3 ) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 using WPC @ 2% by weight of cement on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed.(Note :- WPC shall be measured and paid seperatelly)

Supply only Integral water proofing compound confirming to IS-2645-2003 of approved make.

Demolition of old unserviceable septic tank filling with earth complete all as specified and directed.

Demolition of old unserviceable soak well filling with earth complete all as specified and directed.

M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F, angle iron (Fe-310) as in posts, struts in fencing including cutting top to shape required, drilling holes, notching for wire etc complete all speciified and directed

Supply only galvanised chain link fencing, any size or type, all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all speciified and directed

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia complete all speciified and directed

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&Lfor Fibre glass 2 mm Thick reinforced translucent corrugated sheeting with two corrugations/plain side lap fixed with coach screw and washer in roof, wall etc any colour . complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc incl necessary form work complete all as specified and directed.

S&F for mild steel deformed bars or TMT bars 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto, as item -36 above but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed.

M &L for Non skid ceramic coloured floor tiles shade as approved and size 300 x 300mm x 7mm thick set on 15mm thick in screed bed in cement mortar (1:6) and pointed in neat cement slurry including jointing with white or colour cement to match complete all as specified and directed

M & L for glazed ceramic colour tiles of size 300 x450mm x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including10mm thick backing coat in CM 1:4 all as specified and directed.

Demolition of RCC nexc 15 cm thickness (below or above ground level)

M & L for RCC 1:2:4, type B1 using 20mm graded stone aggregate in RCC beam cantilever lintel, shelves, hold fast etc. with necessary form work complete all as specified and directed.

Taking down steel tubing and connections and fittings 15mm bore including cleaning for refixing or removing from site complete all as specified and direceted.

Taking down steel tubing and connections and fittings 20mm bore including cleaning for refixing or removing from site complete all as specified and direceted.

M & L for GI tubing 15mm dia, medium grade, galvanised with all fittings fixed to wall and floor all as specified.

M & L for GI tubing 20mm dia, medium grade, galvanised with all fittings fixed to wall and floor all as specified.

M & L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:3 not exc 10cm in girth.

S & F in repair PVC (SWR) Pipes 110mm dia single socketed in any length with rubber ring joints , laid in trenches or in all as specified and direceted.

S & F 75mm PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F in repair PVC (SWR) bends any radius 110mm dia.

S & F PVC (SWR) single TEE equal 110mm dia.

S & F PVC (SWR) bends any radius 75mm dia.

S & F in repair 75mm dia PVC Floor trap incl grating fixed in floor with cement complete all as specified and directed.

Supply and fixed in repair vitreous china wash hand basin white flat back size 550x400mm including 02 Nos angle iron bracket 40x40x5mm, PTMT waste coupling and 32mm dia waste pipe of suitable lengh with socket, complete all as specified and directed.

S & F in repair vitreous china wash down water closet (pedestal pattern) pan white with “P” or “S” trap including connection to drain or outgoing pipe and to syphonage pipe complete all as specified and directed.

S & F in repair Vitreous china squatting pan Orissa pattern 'long pan' size 580x440mm white with 'P' or 'S' trap, front or back inlet any pattern excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and directed.

S & F in repair fancy type 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated,pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixedcomplete all as specified.

S & F in repair cast copper alloy bib taps chromium plated 15mm bore pipe with crutch or butterfly handle complete all as specified and directed.

S & F in repair Angle valve cast copper alloy with capstain head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.

S & F in repair CP shower rose fancy type with or without swivel joints of size 125mm dia including fixing to steel pipe or union as directed.

S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall as directed.

S & F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified

S & F in repair hand shower (Health facut) with 1 M flexible tube with wall hook bracket etc, complete set of superior quality.

S & F in repair CP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality.

S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer as directed.

S & F in repair CP Brass Tabular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long.

S & F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed.

S & F stainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed.

S & F in repair rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F in repair rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed.

S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm and removing from sites directed.

S & F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and but both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. all as specified and directed.

S & F powder coated (minimum thickness of powder coating 50 micron) anodised Aluminium frame for doors, windows, ventilater with one or more rebates including jointing cleat for fixing etc, complete all as specified and directed.

S & F powder coated (minimum thickness of powder coating 50 micron) anodised Aluminium glazed window shutter top hung type, using aluminium section 65x38x1.25 to 1.5mm thick, including 4mm thick pin headed/tinted glass, screw, jointing cleats, rubber packing, Aluminium snap beading including 01 No Aluminium tower bolt 100mm long, 1 Nos Aluminium handle 100 mm long, 02 No 100 mm long Aluminium hinges B-21 type in each shutter etc complete all as specified and directed.

S & F powder coated (minimum thickness of powder coating 50 micron) anodised Aluminium window shutter top hung type using aluminium section 65x38x1.25 to 1.5mm thick including stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm, fixed with screw, jointing cleats, rubber packing, Aluminium snap beading including 01 No Aluminium tower bolt 100mm long, 01 Nos Aluminium handle 100 mm long, 02 No 100 mm long Aluminium hinges B-21 type of each shutter etc complete all as specified and directed.

S & F Aluminium Butt hinges, 100mm size complete all as specified and directed.

S & F 150mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed.

S & F alumunium handle, fabricated type, anodised 150 mm long complete all as specified and directed.

S&F 4.8 mm Sheet glass,ordinary quality in square of any size complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm fixed with stanless steel staples or steel/wooden beadings to windows complete all as specified and directed.

M & L for for preparation of new plastered wall surface and applying two coats of white wash complete all as specified and directed.

M & L for for preparation of new plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

M & L for for preparation of new plastered wall surface and applying two coats of cement base paint complete all as specified and directed.

Demolition of Cement concrete (unreinforced) in ground floor and paving not exc 15cm thicknes below or above ground level complete all as specified directed

M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151, two parts of cement by weight complete all as specified and directed.

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed.

M & L for 10mm thick rendering on fair faces of brickwork or concrete surface in CM (1:3 ) including finished even and smooth (without using extra lime or cement) using 100% coarse sand on roof surface including WPC as per manufacturer's instructions complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate and mixed with 3% integral water proofing compound as in padding over roof slab, finished surface rough complete all as specified and directed. NOTE: (i) WPC shall measured and paid seperately.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).Complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified.

M & L for Hardcore of Broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2(40mm graded stone aggregate) as in sub base,foundations filling and mass concrete

Providing and laying 60mm thick factory made chamfered edge cement concrete rouber moulded paver block of M-30 grade with approved colour design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed:

M&L Chequered cement concrete tiles coloured PU mould 30cmx30cmx20mm thick, jointed and pointed in neat cement slurry with grey cement and no pigment set on 15mm thick cement screed(1:6) slurry and pointed incl white or colour cement to match complete all as specified and directed

M & L for RCC NP3 200mm diameter pipe laid laid on 150mm thick bed of PCC 1:4:8 with excavation upto 1.65m depth in any type of soil, including manholes / drop manhole of standard size made of brick masonary / RCC / precast RCC with SFRC ventilating cover frame include all items and activities to execute and make sewer line functional.

Earth filling under floor spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required (Item reused obtains from excavation)

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified.

M & L for 100 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite. including 15 mm thicks screed bed or bedding layer of mortar 15 mm thick for laying floor finishes all as specified and directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M&L 45 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as pecified.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. all as specified and directed

Taking down carefullycopper/aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per above item No 110 but one socket outlet point 5 Amp on an independent board

All as per above item No 110 on the same board 5 Amp

All as per item 110 here in before but using 2.5 sq mm PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S&F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

S&F modular switches 1 way 6A,1 module,

S&F modular switches 1 way 16A,1 module,

S&F modular 6 A sockets-2/3 pin combine 2 module

S&F modular 6A/16A sockets-2/3 pin combine 2 module

S&F Modular white cover plate with frame 8 module

S&F Modular white cover plate with frame 6 module

S&F Modular white cover plate with frame 3 module

S&F Modular white cover plate with frame 1 module

S&F ceiling rose surface bakelite three terminal complete as directed.

S&F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed.

S&F angle type holder WITH 9 W LED BULB insulated body with back plate suitable for batten fittings as directed.

Supply & fix modular fan regulator 120W, 2 Module for ceiling fan fixed, in board and connecting as directed, after dismantling and removing unserviceable regulator.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall, including making recess on wall of required size and all necessary fixing accessories complete all as specified and as directed. Make: Crompton Ventilus /Havells Ventil Air Dx / Usha Crisp Air Lx

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and floral glass globe with nickel finish, ( B-22/E27 base), with 02 No. 10/12 W LED Bulb, 230 V, 4000/6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Note: Rates incl 02 numbers of 10/12W LED Bulb with each fitting)

Supply and fix 5/7 Watt Adjustable LED Spike/Ring spot light, Aluminum Body, Rustproof, IP 65 ,4000/6500K as required on site as spacified and directed by engineer in charge .

S&F in repair super bright LED (2X2), 36 W,4000/ 6500 K surface mounting minimum 100Lumens/watt IP20 ,IK02 PF>.9 and 4kv inbuilt surg protection with high efficent LED source including fixing upto 30 ft ceiling height and making good disturebed suaraface all as per specified and directed by engineer in charge.

S&F black antique Chandelier indoor light LED fitting Warm/day cool as required, minimum with high power LED complete with ( B-22/E27 base), with 12 Nos led lamb (4000/6000K) of suitable wattage including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on ceiling including all necessary fixing accessories with nuts and bolt including fixing upto 30 ft ceiling height and making good disturbed suaraface complete all as specified and as directed .

S&F in repairs of surface type round LED 18/20W downlighter 4000/6500K 2.5 KV inbuilt surge protection minimum 110 lumens/watt, 50k burning hours aliminium PDC all as per specified and directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge Note: Makes shall be provided group A cat as per latest approved make given by HQ CECC

S&F in repairs outdoor type Flexiion 50Mtr LED strip IP65 Water-Proof Rope and Strip Light, 3000K/6000K as required on site with driver with wide viewing angle for good light distribution, easy to install.

S&F LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, “ IP66 and IK 07 average life 50000 burning hours with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts.

Supply and lay cable XLPE insulated screened PVC bedded, galvnised steel strip or wire armoured electric power cables (heavey duty ) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable)

Supply & Laying sub class `B’ bricks old sizes over the LT cable laid flat for protection of cable.

M & L of GI pipe medium grade of 40 mm dia base in trenches/poles/walls for protection of cable including fittings.

S&F MCB DB sheet enclosure single pole and neutral 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for (4+2) way double door complete all as specified and directed by Engr-in-charge.

S&F MCB single pole 5 to 32 Amp 240 volts 10 KA breaking capacity complete as directed.

Ditto as item No 133 herein before but 16-40 Amp, 240 volts, single pole & neutral complete as directed.

S&F MCB, triple pole & neutral 100 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F double door VTPN 4 way double door suitable for 4 pole MCCB 125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed by Engr-in-charge. ( Note: MCCB & MCB to be measured and paid seprately)

S&F MCCB 125 Amps 415 volts, 4 pole 16 KA breaking capacity complete as directed.

S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar (8+2 )way double door type , 240 volts as directed.

S&F modular tytpe plug and socket DBs with Single pole MCBs rated 32 Amps capacity including making niche in wall and mounted flush complete all as specified.

S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs to operate on 230 volt AC, vertical type including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity including disconnecting and taking down old unserviceable Geyser and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed.

M&L for two single core PVC insulated cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit complete.(PVC Conduit and accessories shall be deemed to be included in the quoted rate)

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed .

M/S Reliance Construction

M/s Chandra Mohan and Sons

QUALITY CONSTRUCTIONS CO