SPL REPAIR WKS TO BLDG NO P-72 INCL SECURITY WALL WITH FENCING AROUND THE BLDG, PROVN OF 09 X HY DUTY EXHAUST FANS AND 15 X INDUSTRIAL WALL MOUNTED OSCILLATING FAN UNDER GE JHANSI

Amount

Demolition of Brickwork or stone/ boulder masonry, built in CM incl all quoins, arches, pillars, etc, complete all as specified and directed.

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with Fly ash old size brick , straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with Fly ash brick straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed.

All as per Ser item No 2 above but except bricks complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.

M&L, Rendering 15mm thick in two layer consist of 1st coat of 10mm thick in CM 1:6 and 2nd layer 5mmthick in CM 1:4 finish even and smooth incl WPC as per manufacturer instructions at any height etc on of brick work or concrete surface complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only liquid WPC complete all as specified and directed.

M & L for preparation of new wall to make the surface free from dust, loose paint etc. and applying 2 to 3mm interior wall care putty by skilled labour complete to obtain the surface become smooth etc and apply one coat of acrylic water based interior grade primer to allow 6-8 hrs to dry the surface for painting of subsequent coats and over two coat water based premium oil bound distember of approved colour to allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Note :- (i) Paint of oil bound Distemper and Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.

M & L for preparation of new wall to make the surface free from dust, loose paint etc. and applying 2 to 3mm exterior putty by skilled labour complete to obtain the surface become smooth etc and apply one coat of acrylic water based Exterior grade primer to allow 6-8 hrs to dry the surface for painting of subsequent coats and over two coat water based premium exterior grade emulsion of weather coat of approved colour to allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note:- (i). Paint of exterior emulsion of weather coat and Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.

M & L for Complete removal of existing treatment to make the surface free from dust, loose paint and applying 2 to 3mm interior putty by skilled labour to obtain the surface become smooth etc and apply One coat of acrylic water based interior grade primer to allow 6-8 hrs to dry the surface for painting of subsequent coats and over two coat water based premium oil bound distember of approved colour to allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note :- (i). Paint of oil bound Distemper and Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.

M & L for Complete removal of existing treatment to make the surface free from dust, loose paint and apply one coat of acrylic water based Exterior grade primer to allow 6-8 hrs to dry the surface for painting of subsequent coats and over two coat water based premium exterior grade emulsion of weather coat of approved colour to allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note:- (i) Paint of exterior emulsion of weather coat and Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.

M & L for complete removal of old plastered surface and applying three coats of white wash on ceiling complete all as directed.

Roughening surfaces of old concrete floor ( Tile) by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises as directed.

M&L for non skid ceramic coloiured tiles joint free 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick screed bed in cement mortar (1:6) in floors etc complete all as specified and directed.

M&L for Glazed rectfied jointless light coloured group ceramic tiles, PEI Grade-0 of size 450mmx350mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick backing coat ( rough finish) in cement mortar 1:4, complete all as specified.

M&L for Non-skid colour ceramic tile tiles joint free 8 to 10 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:6 over brushing neat cement slurry @ 3Kg/sqm etc complete all as speciefied and directed.

All as per Ser item No 20 above here in before but 100mm wide as in skirting etc. set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 complete all as speciefied and directed.

M&L for 15 to 18 mm thick Kota stone slab in riser, steps, skirting etc laid over 10 mm thick backing coat (rough finish) in 1:4 jointed and pointed in grey cement mixed with pigment to match the shade of slab incl rubbing and polishing to achieve mirror finish complete all as specified and directed. Note:Kota stone slab in Stair ( tread & rise ) shall be in single piece to fit and Granite polished

M&L for 20-25mm thick Kota stone slab as in flooring and like over 20mm thick in cement mortar 1:3 bedding including pointing ingrey cement mixed with pigment to match with shade of slab incl rubbing and polishing to achieve mirror finish complete all as specified & directed. Note: stone slab shall be in single piece of 595mm X 595mm complete all as specified and directed.

M&L for 18-20 mm thick granite slab any colour shade approved by EIC over 15 mm thick cement screed bed laid on CM 1:6 and jointed with white cement slurry mixed with pigment ot match the shade to flooring / Window cills / steps,riser incl rubbing and polishing to achieve mirror finish and rounding to edge of marble complete all as specified and directed. Note :- Rate for edge moulding measured under seperate item)

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each and all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and refixing the other opening ( Aluminium) all as specified and directed.

Mild steel Framed work as in safety doors fabricated out of mild steel hollow sections of sheet thickness not less than 1.25mm thick, MS square bars or other section with, rails, braces, sliding door bolt fabricated out of 16mm Ms round bar, staple etc with and including provn for fixing of wire mesh, complete and fixed to mild steel pressed chowkhats, complete all as specified and as directed. Note: (ii) Sketch drawing for safety door shall be provided by the GE during execution of work. (ii) Wire mesh shall be measured and paid for seperately.

S&F for factorymade single extruded WPC ( wood polymer composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60(Suspension grade) , calcium carbonate and natural fibers(wood powder/rice husk /wheat husk) and non toxic additives(maxium toxicity index of 12 to 100gms) having maxium density of 650Kg / Cum and screw withdrawel strength of 1800 N (Face) & 900N(edge), maxium strength 50N/Sqmm, modulus of elasticity 850N/Sqmm and resistance to spread of flame of class A category with property of being termite/borerproof,water/moisture proof and fire retardant and fixing with stainless steel butt hinged of required size with necessary full body threaded star headed counter sunk SS Screw all as per direction complete all as specified and directed.

M&L for factory made solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory Made Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. & fixing in frame at site as per specification & drawing and as directed.

S&F for door seal brush (Aluminium plate with nylon brush) of required length for any size of doors, fixed with stainless steel screw, complete all as specified and directed.

M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C0 using 12.5mm graded crushed stone aggregate complete all as specified and directed. Note :- Rates for PCC 1:3:6 type C0 filling shall be not included and measured in seperate item

All as per Ser item No 33 above before but except size 125x60mm complete all as speciefied and directed.

S&F for Box type steel windows with 80x40x1.25mm MSRectangular hollow section frame with side hung shutters (double shutters for glass and gauze) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C Ref TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and directed.

S&F for Box type steel Ventilator with 80x40x1.25mm MS Rectangular hollow section with side hung shutters (single shutters for glass ) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C Ref TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and directed.

M&L for 4.0 mm thick glass ordinary quality, glazing or black with aluminum beeding and gasket to aluminum framework in square n. exc 0.50 sqm in each pane complete all as specified and directed.

M&L for 4.0mm thick frosted glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane in repair complete all as specified and directed.

S & F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed.

M&L for MS medium , cold rolled and fixed butt higes 100 mm and fixed complete all as specified and directed.

M&L for Aluminium extruded with Galvanised mild steel butt higes 100 mm and fixed complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.

S&F for aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300mm long, complete all as specified and directed.

S&F for aluminum handles cast type anodized 150mm long (ISI Marked) complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.

M & L for two coat of synthetic enamel paint over one coat of red oxide, zinc chromiume on steel surface including preparation of new steel surface width or girth exc 10cm all as specified and directed.

Supply & Fix in repair Vitreous China wash down water closet(EWC) including PVC Sheet cover complete all as specified and directed.

M & L in repair for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed.

S&F in repair for PVC valveless, with top button double action type,syphonic action type flushing cistern, 10 litres capacity, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe complete all as specified and directed.

S&F in repair for Vitreous China wash basin , White (flat back or angle back type) size 550x400mm including waste coupling & waste pipe, cutting for and pinning in ends of brackets or erecting stand but excluding taps, chain and plug and porcelain stopper complete all as specified and directed.

S&F in repair for towel rack brass chromium plated, 60cm long between flanges, complete all as specified and directed.

S&F for towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified and directed.

S&Fin repair for Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F for glass shelf assembly 200mm, fixed with brass screws and plugs, complete all as specified and directed.

S & F in repair Bib tap CP fancy type long body 15 mm bore with capstan head handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

S & F in repair for Stop /angle cock, CP fancy type 15 mm bore screwed down high pressure with capstan head handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S&F in repair for wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs and wall flanges, complete all as specified and directed.

S&F in repair for CP brass centre hole basen mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, complete all as specified and directed.

S&F in repair for sink mixter with regular spout wall mountated with connectings legs & wall flanges and including all necessary fittings complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel sheet not less than 1mm thick for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe incl sink coupling, 40mm waste fitting, overall size 915x460mm with bowl size 410x 330x 160mm, etc complete all as specified and as directed.

S&F in repair for stainless steel plate rack of size 775mm x 900mm x230mm as per sample kept in GE's office of minimum thickness of strip not less than 0.50mm, fixed in repairs, complete all as specified and directed.

S&F in repair for Brass chromium plated shower rose of 200mm size with arm and with or without flush pipe complete all as specified and directed.

S&F in repair for PVC connections 45cm long 15mm superior quality with PTMT nut on both side complete all as specified and directed.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 500 ltr capacity, hoisted and fixed repair in position including 20 mm dia float valve with aluminium fitting, GI nipple , socket or any other fittings as reqd including dismantling existing water tank complete all as specified and directed.

M&L for peg set of six, stainless steel of suitable length, complete all as specified and directed.

S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate. Nothing extra shall be paid on this account.

Taking up or down 15 mm dia bore steel tubing and connection complete all as specified and directed.

S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required, incl 10cm exc but not exc 20cm in girth all as directed and specified.

Fixing only in repair steel tubing and connection 15 mm dia bore to wall and laid in floors complete all as specified and directed.

Taking up or down 20 mm dia bore steel tubing and connection complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors complete all as specified and directed.

S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .

Taking down eaves gutter and rain water pipe including all fittings complete all as specified and directed.

S&F for 110mm bore PVC pipes single socketed Pressure rating @ 6Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and MS ring (25x6 FI used) bolt at every 1.5 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed.

All as per Ser item No 76 above but laid in trench or in floor complete all as specified and directed.

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .

S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) Nahani/ floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75 mm bore PVC pipes single socketed Pressure rating @ 6Kg/Sq cm length with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete ,with all fittings all as specified and directed.

All as per Ser item No 83 above but laid in trench or in floor complete all as specified and directed.

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .

M&L for taking down existing roof treatment of any description and any type and position and removing the deberis from site outside MD land all as specified and directed by Engr-in-Charge

M&L of water proofing treatment to non-accessible roof slab with providing / applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers by Graco tex sprayer having sun reflective index (SRI) of 105 Mfd by Asian paint Ltd / Berger and Equivalent. as approved by GE in three coats laid as per manuacturer's instructions complete all as specified and as directed with following course of description below: (a) Ist coat of self priming of elastomeric waterproofing liquid(dilution with water in the ratio of 3:1). (b) 2nd & 3rd coat of undiluted elastomeric water proofing liquid(dry film thickness of complete allocation/system not less than 500 microns) Note: (i). fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers contain Tensile strength of 2.90Mpa, Elongation upto 350%, solid content 55.90, crack bridging ability upto 2.5mm (ii) Treatment shall be done through authorise representative of manufacturer and atleast 10 years water proofing warranty by manufacture.

M&L for making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified and directed.

S& F for False ceiling with Gypsum based ceiling tiles of size 595mm x 595mm of thickness not less than 9mm with aluminium foil on both side and GI powder coated angle/tee grid frame work with following specifications & incl disamntling ceiling board any type etc :- (a) Bottom Tee- 25mm x 25mm, 1.0mm thickness (b) Cross Tee- 25mm x 25mm, 1.0mm thickness . (c) Wall angle- 25mm x 25mm, 1.00mm thickness (d) 1.imm dia GI wire suspenders alonwith adjustable clamps to maintain levelling in cluding fixing to ceiling fasteners as per manufacturers instructions.

Dismantling of plain, corrugated or semi corrugated sheeting, of any description, in roof coverings complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as directed and specified.

S&F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in in hips or ridge, valley gutter, drip etc fixed with self tapping screws as specified complete all as specified as directed.

S&F for plain, aluminium sheeting, 0.56mm thick Alloy 31000 H4 straight flashing fixed on door lining etc with screws complete all as specified and directed.

S & F for rolled sections as in main and cross beams, hip and jack rafters,truss, purlins where connected to common rafters and running rails, cleat or other connecting plates cutting, welding including Nut Bolts, Fe 410-W(Gde -E-250) quality A all as specified and directed.

Mild steel Framed work as in Steel door frame with shutter fabricated out of mild steel sections including sheet thickness not less than 1.6mm thick, MS square bars or other section with, rails, braces, sliding door bolt fabricated out of 16mm Ms round bar, staple etc with and including provn for fixing of wire mesh, complete all as specified and as directed. Note: Sketch drawing fordoor shall be provided by the Engr in charge during execution of work.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for RCC Nominal mix type B1 1:2:4 (20mm graded aggregate) in slab landings, chajjas,shelves and similar articles with plain faces complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span and complete all as specified and directed.

M & L for use & waste formwork to slab, chajjas,shelf and similar items of rough finished flat surface, incl edges etc complete all as specified and directed.

M & L for use & waste formwork to beam, lintel and similar items of rough finished flat surface, incl edges etc complete all as specified and directed.

M & L broken stone hard core of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for PCC (1:3:6) type C1 using 20 mm graded aggr as in surface channels/drains /mass concrete etc complete all as directed and specified.

M&L for PCC 1:3:6 type B0 (using 12.5 mm graded stone aggregate) as in coping/benching , filling, holdfast and all other similar works including necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and directed.

M&L for RCC 1;2;4, Type B1 (Nominal mix) (using 20mm graded agg) pre-cast cover slab and similar articles complete all as directed and specified.

M&L for TMT Bar 10mm dia and over cut to length bend to shape required incl cranking, bending sprilly for hooping colmns hooking ends and binding with and incl MS wire (Anneled) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Ser item No 106 above but 5 mm dia and over upto including 10mm as in stirrups, spacers and binders and complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level , concrete debris and rubbish to a distance n exc 100m complete all as specified and directed.

M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm agg. ) as in plinth protection / path/ any paved area and surface finished smooth and even without using extra cement with spike rolling or making the impresion of expanded metal whistledbefore the concrete is green complete all as specified and directed.

M&L for 50 mm thick PCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floor finishes and surface finished smooth and even without using extra cement with spike rolling or making the impresion of expanded metal whistledbefore the concrete is green all as specified and directed.

M&L for machine pressed precast M30 grade concrete cobble tile interlocking any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigment complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for Factory made Pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed by Engr in charge ( 300 x150x 450) and setting in mortar 1:4, complete all as specified and as directed.

M&L for providing of anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron., complete all as specified and directed.

M&L for anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors) complete all as specified and directed.

Excavating in trenchs n exc 1.5m in depth and n exc 1.5m wide for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil complete all as specified & as directed.

M&L for Surface excavation n.exc 30 cm deep and and avg 15 cm deep and getting out soft and loose soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & as directed.

Removing excavated soil material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified & as directed.

S&F for laying in trenches, jointing and testing salt glazed stoneware pipe grade 'A' drain pipe 150mm bore conforming to IS at any depth after they are laid and tested complete all as specified & directed.

M&L for PCC 1:3:6 type C2 as in concrete bed to 150 mm bore drain pipe and over incl packing under haunching against the sides of pipes after pipe laid and tested complete all as specified & as directed.

Dismantling posts or struts of RCC embedded in concrete base in any section including taking out embedded portion and making good disturbed groung complete all as specified and directed.

Dismantling of rusted U/S fencing wire meah any type complete all as specified and directed.

Excavation over area n.exe 1.5 Mtr deep and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenchers not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep for fdn etc n. exc 10 Sqm on plan and n.exc 1.5 m depth and getting out in hard/dense soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn , filling and mass concrete complete all as specified and directed.

Use and waste form work to sides of concrete foundations, footings bases of columns, raft and raft beams, sides and soffits (if any) of foundaton and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and directed.

M & L for Reinforcement cement concerete M25 grade (Design mix) for foundation footings, plinth beams, bases for column etc type complete all as specified and directed.

Use and waste form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete complete all as specified and directed.

M & L for Reinforced cement concrete for column etc M-25 grade (Design mix) complete all as specified and directed.

Use and waste form to sides and soffits of floor or roof beams, beam haunch-ings, girders, bressummers,lintels, cantilevers, shelvesincluding sup- ports, overhangs,etc. also splays between floors and beams, etc also splays between floors and beams etc for rough finished surfaces of concrete complete all as specified and directed.

M & L for Reinforcement cement concerete for beam etc M-25 grade (Design mix) complete all as specified and directed.

Rendering 15 mm thick in CM(1:4) on fair faces of bricks or concrete surface finished even fair complete all as specified and directed.

M&L for Joist, channel, angle, or tee sections,fixed independently, withoutconnecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conf to Fe 410 w Grade A complete all as specified and directed.

M&L for Galvanised. 2 strand, steelbarbed wire 2.24mm diabarbed with 2mm dia barbs at 75mm spacings and strainingand fixing to any type ofstandard rails strain- ingbolts, including, securing ortying at crossings with andprovision of galvanised mildsteel wire, complete all as specified and directed.

M & L for three coats of white wash including preparation of new surface complete all as specified and directed.

Dismantling of Structural steel work in cluding gate complete all as specified and directed.

All as per Ser Item No 138 above for each additional 1.5 m or part thereof in depth beyond the first 1.5 m complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed for the following points:-

One light point controlled by one switch

One Exhaust fan controlled by one switch

One ceiling fan/wall mounted fan controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

All as per Ser item No 141 above but with 2.5 sq mm FRLSH copper wire with 2.5 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board complete all as specified and directed.

M&L for Circuit/submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

All as per Ser item No 143 above but 2 runs X 4 Sqmm + 1 run X 4 Sqmm complete all as specified and directed. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

S&F in replacement of Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.

S&F in replacement of Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed.

Supply and fix in replacement of electronic fan regulator in 5 steps, 240V, 50Hz complete all as specified and directed.

S&F in replacement of Socket 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed.

S&F in replacement of Socket, 6 pin, 6/16 Amp, multipurpose 240 volts, complete all as specified and directed.

Supply and fix in replacement of Lamp holder, angle type with metal ring, PVC/Polycarbonate body including taking down existing unserviceable lamp holder of any description complete all as specified and directed.

S&F in replacement of Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in replacement of LED post top lantern light fitting 20/25 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv and complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of 25mm dia medium grade GI pipe of length 0.50m bent to required shape and fixing on ground/walls with pcc 1:2:4 using 20 mm size stone aggregate upto 30 cm and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed.

Supply and fix in replacement of LED light fitting 1 x 10 W bulkhead luminaires including LED Driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in replacement of 7 W LED lamp, retrofit type suitable for B-22 holder base with polycarbonate diffuser complete all as specified and directed.

Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed.

Supply and fix in replacement of LED lights fitting 1 x 20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix in replacement of LED building security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP 65degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and directed.

Supply and fix in replacement of exhaust fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. including taking down existing unserviceable ventilating fan of any description complete all as specified and directed.

Supply and fix in replacement of ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix in replacement of MCB distribution board, VTPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply and fix in replacement of MCB distribution board, SPN, 12 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separetely.

Supply and fix in replacement of MCB distribution board, SPN, 8 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separetely.

Supply and fix in replacement of MCB distribution board, SPN, 4 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separetely.

Supply and fix in replacement of MCCB, 100A, 16 KA, 4 Pole complete all as specified and directed.

S& F in replacement of MCB TPN 63 Amp, 10 KA, 'C' curve, 415 V, 50 Hz complete all as specified and directed.

S& F in replacement of MCB SPN 40 Amp, 10 KA, 'C' curve, 230 V, 50 Hz complete all as specified and directed.

All as per Ser item No 167 above but SP 6 to 32 Amp, 230 V complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 25 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing service cable of any description complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of HDPE pipe and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.

S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.

Supply and fixing exhasut fan, steel body AC single Phase, 230 V of size 450 mm sweep heavy duty with blades, frames and louvers.

Supply anf Fix Air Circulator Fan 230 Volts single phase oscillating 600 mm sweep suitable for wall mounting complete all as specified.

M/S Kesav Dev Agarwal

M/s JS Constructions

HARNAM SINGH ANIL SINGH

Khushi Muskan Engineer & Developer

FTH Traders

S GOURAV PRAKASH ENTERPRISES

M/S NASIM AND CO.

ARTISTIC BUILD CO