REPAIR/ REPLACEMENT OF CUPBOARD, DOOR, WINDOWS, PLUMBING, TILING, SANITARY FITTING IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkat or frames with shutters ( without taking out shutters from frame ) exc. 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.

Taking down chowkat or frames n. exc. 1.5 sqm each with shutters (without taking off shutters from frames) complete all as specified and as directed.

Taking down shutters of any description exc.1.00 sqm and n. exc 2.00 sqm each complete all asspecified.

S&F Plain , solid , straight chowkhats and frames of 2nd class hard wood, wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed.

S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conform-ing to Fe 410-0 or Fe 310-0 complete.

S&F Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow of frame with PCC 1:3:6 etc. complete,all as specified and directed.

All same as per srl item No. 6 above but size 125x60mm

S&F 35mm thick 2nd class hard wood glazed and sekeleton shutter's open rebated prepare to receive glass gouge etc edges of framing plain chamfered or rounded fitted with cut and mitered bead's for securing glass gauge etc size of marker of shutters as per SSR Part-I sec-8 clause 8.24(a).

S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides.

S&F 2nd class HW 30mm thick Plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers including applying two coats of synthetic enamel paint over one coat of pink primer complete as specified and as directed.

S&F 100mm long butt Hinges, medium weight, cold rolled mild steel fixef in repair complete.

S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.

S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed all as spd and directed.

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed

S&F for mild steel 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long.

M&L Resecuring or Easing and adjusting , without taking down shutters of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area not exc 2 sqm each complete all as specified and directed.

S&F Aluminium alloy powder coated (50 micron) anodized door frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock (Make :- Godrej), & double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed.

S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 5.5mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including frame necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge.

S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including frame and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2no.) ,aluminium tower bolt 100 mm long (2no.),suitable handle (1 No.) complete all as specified.

S&Faluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm thk with fixing arrangement complete all as specified and directed

S&F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded .WIRE MESH –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate . Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw . Note: The glazed/Guaged shutter includingguard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. The rate quoted by the contractor is deemed to inclusive two coat of paint over a coat of primer of all aspects incl all fitting,glass,wire mesh,guard bar , as specified in Drg No CEDZ/TD/289 sheet 1 R/2 and 2R/2.

Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden/metal frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads

S&F 4mm thick Figured glass, pinhead type with oil putty in squares n exc 0.5 sq. m each pan complete all as specified.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. Note- Welder with welding machine reqd to fix wiremesh in old steel windows

S&F stainless steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. Note- Welder with welding machine reqd to fix wiremesh in old steel windows

M&L two coats of synthetic enamel painting over a coat of red oxide primer on new steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces

M&L two coats of synthetic enamel painting over a coat of pink primer on new wooden surfaces of any description over 10 cm in width or girth not otherwise described over a coat of pink primer.

Dismantling wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs/ blank ets, any thickness, incl cover fillets all as directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx x 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center. Including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long complete all as specified and as directed.

S &F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) including sunk or raised mouloding complete all as specified and as directed.

M&L for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I ( u p to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed.

M&L for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed.

Dismantling boarding, any description, fixed any position with with screws complete all as specified.

S&F in repair 18/19 mm veenered paticle board solid core, interior grade, with prelaminated both sides with decorative choice laminations as in shelf, drowers, cupboard, partition including wooden/PVC lipping/beading as required etc as directed by Engr-in-Charge

S&F Continuous( piano) hinges (width of flaps 40mm when open , mild steel ,bright finish or electrogalvanised

S&F Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified

S&F in repair 150mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repair 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished

S&F in repair of telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed

S&F in repairs Drapery rod 25mm dia aluminium, powder coated teak wood texture finish 1 mm thick, with end bulbs as reqd, fixing brackets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified

M&L for repair to existing steel rolling shutters/ gates by repairing/welding/ oiling/ greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs including two coats of paint complete all as spd and directed.

M&L for repair to existing steel window/door by welding/replacing hinges/handle or removing the steel window shutters from the frame and re-fixing after making serviceable all as specified

S&F 1.00 mm thick plain black steel sheet in hearths; covering to door shutters; covering to doorchowkats (frames);chullah hoods; water tanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required incl priming complete all as specified and directed.

M & L framed work such as grills, grating,gate etc with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work confirming to Fe - 290-0 or E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F in repair 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, fixed in repair complete all as specified and directed.

S&F in repair Aluminium (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutter of 701 to 851mm in width and of weight between 36 to 60 kg, fixed in repairs, complete all as specified and as directed.

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

M&L for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.

M&L for Vitrified Ceramic light shed Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified.

All same as per srl item No. 55 above but on vertical surfaces such as skirting / dados with and including 10 mm thick CM 1:4 as in backing coat complete all as specified.

M&L for coloured non skid ceremic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed coloured ceremic tiles sizes 450x300x 7mm thk tiles on vertical surfaces , such as skirting/dado over and incl 10 mm rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed.

S&F in repair stainless steel sink AISI 316 grade without drainage board of 1 mm thick kitchen or laboratory with plug , washer and waste, 15mm bore brass Chromium plated sink mixer for mixing hot and cold water, bedding in cement morter to dwarf wall or including CP Waste , PVC Down pipe etc and fixing cantilever brackets and connecting union to pipe overall size495mmx 420mm bowl size 410mm x330mm x160mm etc compete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connnecting union to pipe over all size 1040x460mm bowl size 410x 330 x 160 mm with all fitting and fixture complete all as specified and directed fixed complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack size 750 x 900x250 mm deep made out of 1mm thick sheet including fitting arrangement complete. Make- Maharaja/Nirali/Prayag

Supply and fixing steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling and joints fixed properly including taking up or down steel tubing and connections / PLP pipe (Note :- work to be carried out in S + 8 storey bldg or other various location and unit rate quoted shall deemed to be included for the same complete all as specified & directed.

All same as per srl item No 62 here-in-before but 20mm.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar1:3 in brick or stone wall , cutting not exc 10cm girth complete.

Taking down cement or lime plaster any description on brick or stone walls,ceilings etc including raking out joints hacking for key scrubbing down with waters and removal of rubbish from the premises as directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fare faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified.

M&L for preparation of new plastered surface of walls and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified.

M&L for preparation of new plastered surface of of walls and applying two coat of OIL bound distemper over a coat of primmer and 1mm thick wall care putty complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1:3 on fare faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement in ceiling complete all as specified.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

S&F in repair wash basin, Vitreous China white flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and proclain stopper but including brackets .

S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

S&F in repair wall mixer 3 in 1 chromium plated, with over head shower provision screwed for iron pipes 15mm bore complete all as specified and directed. (Make : Cera, Jaquar, Hindware, Kohler)

S&F in repair 15mm bore brass chromium sink mixer of mixing 'Hot' and 'Cold' water, with swinging point screwed down for iron pipe complete all as specified Make :- Somany Cat No 200360061/Hindware Cat No 200023CP/Cera Cat No F3002581

S&F in repair 15mm bore brass CP basin mixer for mixing hot and cold water fixed as per manufacture's mannual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed Make :- Cera Cat No F3001461/Somany Cat No 220912/ Hindware-F330014CP

S&F in repair seat cover white or any other colour suitable for cascade or wall hung type WC with all fittings and fixture complete all as specified and as directed.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device. (Make : Cera, Jaquar, Hindware, Parryware)

S&F in repair vitreous china floor mounted WC ( Cascade) one piece type (white) including connecetion in drain etc incl water closet seat cover CP health faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed and fixed in repairs. (Make : Cera, Jaquar, Hindware, Parryware)

S&F in repair Vitreous china wash down water closet pan wall hung WC FLS - IVY- 5951 with PP seat cover, hinges, accessories set, size 360 545x365 set jaquar or other equivelent , including flushing cistern and fixed with brass screw complete all as specified and as directed. (Make : Cera, Jaquar, Hindware, Parryware)

S&F in repair Viterous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connectoin to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.

S&F in repair health faucet chromium plated brass with 1.50m CP long flexible pipe and brass chromium plate nuts completed all as spd Make - Cera Cat No. F- 8030103 / hindware, Jaquar.

S&F in repair cast copper alloy CP toilet paper holder fixed with plug and brass screw completed all as specified.

S&F in repair CP brass soap dish complete all as specified & directed Make Hindware Cat No F880011/ Cera F5003106

S&F in repair brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed with brass screws complete all as specified and as directed. (Make : Cera, Jaquar, Hindware)

S&F in repair CP towel ring complete all as specified & directed Make Cera Cat No 5004105/Hindware Cat 880007 ,Somany Cat No 230703

S&F in repair looking mirror size 600x450mm mounted on 6mm thick PVC sheet and aluminium frame all around incl fix with necessary fixing arrangement complete all as specified and as directed.

S&F in repair looking mirror of size 1450x600mm mounted on 6mm thick PVC/ suitable sheet and aluminium frame all around incl fix with necessary fixing arrangement complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.50mm thick sheet glass self 12cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and as directed.

S&F in repair corner glass self with CP brackets consisting of 5.50mm thick sheet glass of size 300 x 300 cm complete all as specified and as directed.

S&F in repair Grating doom 125 mm dia with or without waste hole of PTMT. (Minimum weight 40 gms) complete all as specified.

S&F in repair 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repairs. (Make : Cera, Jaquar, Hindware)

S&F in repair cast copper alloy chromium plated angle cock, of 15 mm bore complete all as specified and as directed. (Make : Cera, Jaquar, Hindware)

S&F in repair Fancy type Bib tap CP with crutch or butter fly handle, 15mm bore complete fixed to GI pipe complete all as specified and as directed. (Make : Cera, Jaquar, Hindware)

S&F in repair 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed. (Make : Cera, Jaquar, Hindware)

S&F in repair PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.

S&F in repair over head shower rose CP Brass with shower arm for 15mm bore pipe of size 150x150mmcomplete all as specified and directed Make :- Somany Cat No 240406/ CERA - F7010506/ Hindware-240806

S&F in repair 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs

S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs

S&F in repair 32/40 mm spring type PVC waste pipe fixed toWHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should not be less than 0.70RM)

S&F in repair Waste 40mm fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed

All same as per srl item No. 103 here-in-before but 32mm.

S&F in repair brass spindle half turn suitable for 15 mm bib cock / stop cock/ concealed stop cock/ angle cock/ Mixer complete all as specified and directed.

S&F in repair brass spindle half turn suitable for jaquar / hindware fancy type fitting Basin Mixer / Sink Mixer etc complete all as specified and directed.

M&L for Preparation of new/ old plastered surface of wall and applying approved Designer wall Paper roll over a coat of priming coat including 2mm thick wall care putty including removal of existing treatment on surface of walls by scrapping down with mechanical grinder complete all as specified and directed.

S&F in repair for 2 mm thick Plain colour PVC sheet fixed with screw over any type of MS/steel gate grill etc. omplete all as specified and directed.

M&L for wooden floor tiles 7mm thick with dovetailed joints laid over 150 micron polythene film and 3mm thick foam as per maufacturer's instructions, including taking down of old Wooden flooring and fixed with decorative wooden beadings as per site requirement complete all as sfd and directed Make and shade of tiles be all as approved.

S&F in repair curtain rod/ rail with stainless steel rod fancy type 25 mm dia including bracket and fancy type lattoo, etc complete all as specified and directed.

M/s Shubh Enterprises

MAA SANTOSHI ENTERPRISES

Vipul Construction