Construction of 01no. cycle stand each at Argul Belapada School nearby Pandiabili GIS SS under CSR scheme

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth) including getting out and disposal of excavated earth within the premise and lift upto 1.5 m, as directed by Engineer-in- charge. All Kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position reinforced cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. (No extra payment for chairs,spacer,lapping etc. It is deemed to be included in unit rate)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying one priming coat of zinc rich primer of approved brand and manufacture to give an even shade. all complete. as per direction of EIC.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.all complete as per instruction of EIC.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with PDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Flashings/ Aprons.( width 600 mm)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern

Providing and fixing 16 mm dia.bolts including nuts and washers up to length 300 mm complete all as per direction of Engineer-in-Charge

Construction of one cycle stand/parking shed (25Mx4M) each in Sakuntala Devi Govt High School, Taraboi and Govt U. P. School, Tirimal under Jatani block near to POWERGRID Pandiabili GIS Sub-Station (under CSR Budget)

2 or More

JV (Joint Venture)

Average annual turnover (in INR)

Details of Contract & Date

Tentative Completed date

Qualification

Ref/ Page No.

Ref/ Page No.

Ref/ Page No.

Ref/ Page No.

POWER GRID CORPORATION OF INDIA LIMITED,

Section

Clause No./ Page No.

Ref. and Page No.

Ref. and Page No.

Period in weeks (from the effective date of LOA)

Date of Retirement/ resignation from POWERGRID

Date of Retirement/ resignation from POWERGRID

Date of Retirement/ resignation from POWERGRID

Name of the published index

Wholesale Price Index Number for ‘High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)

Wholesale Price Index Number for ‘Ferrous Metals’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

Wholesale Price Index Number for High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)

Wholesale Price Index Number for ‘Cement & Lime’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

Wholesale Price Index Number for ‘Structural Clay Products’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

JV (Joint Venture)

FALSE

We have enclosed a Bid Guarantee in original and one copy in the form of Bank Guarantee (Bank Guarantee No.-, dated DD-MM-YYYY issued from ) for a sum of Rupees /-, Valid for a period of Seven [07] calendar months from the date of opening of bids i.e. upto and inclusive of DD-MM-YYYY.

EMD DETAIL FORM

Bank Guarantee No.

Name of Issuing Bank :

Clause No 13.0, ITB, Section -II and cl. 3.0 SCC, Section-IV, Volume-I

Clause No.64.0, Conditions of Contract (GCC) & Clause 11.0, SCC

Clause No.14,Section GCC, Vol.-I ,Conditions of Contract & Clause 12.0 of SCC, Section-IV, Vol-I & Clause 33.0 of ITB, Volume-I

Clause No 10.0 of SCC, Volume-I

Clause No 11.0 of ITB,

Cl.No.45.0 & 46.0 Section. GCC, Vol. I, Conditions of Contract & Clause 8.0 of SCC, Volume- I

Clause No. 9.0 of SCC, Volume -I

Banks certified Cheque

Bank Guarantee