NIT NO. 319/DURG(Rajnandgaon)/2026

NIT Schedule For WMM and BT Patch Repairing Work of Bortalav and Chichola Section Under Sub Division Dongargarh

Road SOR Effected From 15.06.2026 PAC Rs. 67.75 Lacs

Sr No Chapter No Item No Sub-Item No Particulars Quantity Unit Rate Amount

1 4 6 Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406. 328.10 Cum. 1365.00 447855.00

2 5 1 (i) Prime coat Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular base including clearing of road surface and spraying primer using mechanical means as per clause 502. on WBM/WMM surface @0.85 Kg/sqm. 2986.88 Sqm. 65.00 194147.00

3 5 2 (i) Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503. Bituminous surface @ 0.25 kg /Sqm 37642.44 Sqm. 13.00 489352.00

4 (ii) Granular surfaces treated with primes @ 0.30 kg /Sqm 2986.88 Sqm. 15.00 44803.00

5 5 21 B Providing and laying leveling course / profile corrective course with bituminous macadam With minimum 40-60 TPH capacity hot mix plant using crushed aggregates of Grading-1 premixed with bituminous binder @ 3.1% transported to site and laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause-501.6 and 501.7 to achieve the desired compaction complete in all respect and as per relevant clause section 500. With mechanical paver finisher 149.69 Cum. 4562.00 682872.00

6 5 12 II A (ii) Close Graded Premix Surfacing/Mixed Seal Surfacing (Mechanical means using minimum 40-60 TPH capacity of HMP.Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade, complete as per clause 508)complete in all respects) With mechanical paver finisher With Bitumen Type B ( 13.2 mm to 0.09 mm size aggregates ) 40629.31 Sqm. 121.00 4916147.00