Upgradation and Furnishing of Restaurant, Library and New Gate at J.C.S.O.I. Club, Dindayal Nagar, Morabadi, Ranchi

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead all as building specification and direction of E/I

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing Brick Flat solling &joint filling with sand do do complete job.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) Foundation

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) Colummn

Providing Toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)

8 mm dia

10 mm dia

12 to 25 mm dia

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Providing designation 75 A brick work in C.M. (1: 3) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastersd wall surface to prepare the surface even and smooth complete.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

Providing two coats of plastic emulsion paint of approved shade and make over old surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Providing and fitting & fixing Toughened glass 12mm thickness Partition Work all complete job

Head Carpenter

Carpenter 2ND CLASS

Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.

Carriage of Materials

A) LOCAL SAND , LEAD - 3KM(P)

B) SAND , LEAD - 8KM(P)

C) STONE CHIPS , LEAD - 22KM(P)

D) BRICKS , LEAD-1k+7p=8KM.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of PVC insulated, copper conductor single core cable in surface/ recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq.Mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate,suitable GI box etc. as required.

S/F/F all height wall paneling of 19 mm thick water proof ply (centure panic Pine wood, ISI Mark,Termites) over 2"x1" aluminium section, 6mm thick water proof ply (green decor wood) 12mm ACCOUSTIC RUBBER PANEL and Leather all complete including all taxes and royalty all complete as per building specification and direction E/I

S/F/F Chair repair Fabric all complete including all taxes and royalty all complete as per building specification and direction E/I

Supply providing and fixing all height wall paneling of 19 mm thick water proof ply (centure panic Pine wood, ISI Mark,Termites) over 2"x1" aluminium section, 4 mm thick water proof veneer (green decor wood) finishing with malamine polished all complete including all taxes and royalty all complete as per building specification and direction E/I

Supplying and Fixing & Fitting of Window Curtain (9'-6" Hight) in the direction of E/I.

Supply and instalation of Artise Painting Painting framing all complete as per specification and direction of E/I.

Providing and fitting & fixing Granite Top Buffet Counter 15'6"x2'6"

S/F/F Book Shelf of 19 mm thick water proof ply , 4 mm thick water proof veneer (green decor wood) finishing with malamine polished all complete including all taxes and royalty all complete as per building specification and direction E/I

Supplying and laying corian Maxicon carpet Grass of hybrid best quality including supplying and mixing of vermin compost do--d0--- all complete as per building specification and direction of E/I

Supplying of PLANTERS Round Plastic Flower PotsOr Plant PLANTERS all complete (DM - 1515) 5116877-31011410690

Supplying of Unbranded Rosewood CarromBoard NA (29 Inch C.B.) all complete 5116877-27053378344

Supplying of Unbranded AluminiumPowdercoated 180 gsm PolysterAcrylic Wicker Furniture NA all complete (FG Outdoor Coff ee Set) 5116877-52326735753

Supplying of Unbranded AluminiumPowdercoated 180 gsm PolysterAcrylic Wicker Furniture NA all complete (MFH- 101SOFA) Product Details NA (FG Outdoor Coff ee Set) 5116877-27897677586

Supplying and fixing of MIDEA 2 Ton, 1 Start AC MIDEA (MIDEA CASSETTE AC 24K 1 STAR) all complete Product ID-5116877-38309987346

Providing Copper Pipe Line for AC installation

Providing Drain Pipe for AC installation

Wiring for AC 3Core 4mm Copper Wire for AC installation

Providing Stand for AC installation

Supplying of LG Smart Television Tv 75 Inch LED Backlit LCD LGR (75UP771C) Product ID 5116877-64121638132

Supplying of Ahuja Aluminum Audio Amplifier, Warranty 1 year ahuja (AHUJA Wired Amplifier LXA-3200 (3200 W)) LGR (75UP771C) Product ID 5116877-22489251494

Supplying of Tannoy One Way PA Speaker,Warranty 5 Years Tannoy (TANNOY CVS 301) Product ID 5116877-39300548768

Supplying of Unbranded PVC Speaker cable,Warranty 1 year NA (SPK-HFS-16-2-ATC) Product ID 5116877-45991174145

Supplying and Fitting 9 Watt COB (Havels Make)

Supplying and Fitting Hanging Light

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

K & G ASSOCIATES