8156 REPAIRS TO FLOORING WALLS PLASTERING CELLING ETC IN CERTAIN BLDGS IN AIPT UNDER GE CENTRAL PUNE

Amount

Demolition of brick work built in cement or cement lime mortar of any description including quoins, arches, pillars etc and removing from site complete all as specified and as directed

Taking down cement plaster of any thickness on brick or stone walls etc, including raking out joints, hacking for key, scrubing down with water and removing rubbish from site complete all as directed.

Taking down shutter exc 2.0 sqm each including removing from site complete all as directed.

All as per item No 3 here-in-before but exc 1.0 sqm and n exc 2.0 sqm each.

Dismantling wall and celling board, any thickness including cover fillets and removing from site complete all as specifed and directed.

Dismantling plain or Corrugated, semi corrugated, galvanised sheets of any type in roof covering including removing from site complete all as specifed and directed.

Dismantaling mild steel or wrought Iron in any position and removing from site complete all as specifed and directed.

M & L for PCC 1:2:4 type B1 using 20mm graded stone agg as in roof kerbs or mud stops, rounded or chamfered on edges incl necessary form work complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde C-5 and setting in CM 1:6 complete all as specified and directed.

M & L solid block masonry n. exc 10 cm width, using blocks of PCC (1:5:8) Grade C4 set jointed and built in cement mortar 1:4 complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood plain framed panelled shutters (any number of panels) with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated all as specified and as directed.

S&F 35 mm thick 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, complete all as specified and as directed.

S & F factory mode solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.

Taking down shutters of any description n.exc 1.0 sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work complete all as all specified and directed.

All as per Sl No 16 here-in-before but exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and as directed.

Resecuring or Easing of wooden window shutter/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening tightening of hinges or changing of position of hinges, adjustement of tower bolts sliding bolt and haps and staple etc complete all as specified and as directed.

All as per item No 18 here-in-before but doorshutter complete all as specified and as directed.

Resecuring the wooden beading & tightening of GI/steel wiremesh including nails/screws etc complete (one unit shall comprise for one door shutter or one window shutter irrespective of number of leaves) complete all as specified and directed.

M & L for replacement of wooden glazing beading of IInd class hard wood straight (any size) finished wrought for glazing or gauged joinery for tixing wire gauge/securing glass pane complete all as specified and directed.

S & F 100mm long stainless steel Butt hinges medium weight cold rolled fixed with SS screws complete all as specifed and directed.

S&F 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S&F 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F in repairs 300mm size MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F Floor door stopper of brass body and tongue, with hard drawn steel spring of 140mm long cover plate complete all as specified and directed.

S&F in repair two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed.

Supply and fix in repairs150mm size fancy brass handles, extruded, fabricated type, polished complete all as specified and as directed.

Supply and fix in repairs 200mm long, fancy brass barrel tower bolt, with cast or sheet barrel and rolled or cast bolt complete all as specified and directed.

S&F in repairs 100mm size mild steel stove enamelled black finish hasp and staple complete all as specified and as directed.

S&F in repairs mild steel handles right or left galvanised / stove enamelled black finish for steel windows as per sample complete all as specified.

S&F in repairs mild steel peg stay stove enamelled black fInish for steel windows as per sample complete all as specified and as directed.

S&F in repair stainless steel peg set of six all as specified and directed.

S&F in repair mild steel mortice lock brass body 4 lever including two Nos brass handle suitable for wooden shutters complete all as specified and directed.

S&F in repair 25 mm bore aluminium powder coated curtain rod complete all as specified and directed.

S&F in repair aluminium powder coated fancy type bracket suitable for 25 mm bore curtain rod complete all as specified and as directed.

S&F in repair mild steel 300mm long, door spring ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 100mm size butt hinges, medium weight cold rolled complete all as specified and directed.

S&F in repairs 300mm long aluminium anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs stainless steel Wire cloth 0.56mm nominal dia of Wire and average Width of aperture 1.18mm and fixed with stainless steel stapple/ wooden beads to steel or wooden windows/ door/ shutters/ frames etc. complete all as specified and as directed.

S&F for mild steel framed work conforming to grade E-165 (Fe-290) as in grills, gratings etc with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like complete all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm dia G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light all as specified and directed.

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M & L for 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, wall etc fixed with L-type or J-type or cranked hook bolts including dismantling old u/s AC sheet complete all as specified and directed.

M & L for asbestos cement two piece adjustable ridge 6mm thick fixed with L or J bolts with washer etc complete all as specified & directed.

M & L PCC 1: 2: 4 type B0 ( using 12.50mm graded crushed stone agg.) 25mm thick as in floor finishing surfaces of concrete topping even and smooth with using extra cement complete all as specified and directed.

M & L for providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protection laid in bays not exceeding 2 sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection complete all as specified and directed.

M & L for Non skid ceramic coloured tiles in flooring 7 to 8 mm thick, area of each tile exceeding 0.06 sqm and not exc 0.11 sqm with joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick cement screed bed in CM 1:6 complete.in patchwork n exc 5.00 Sqm each patch complete all as specified and directed.

All as per item No 48 here-in-before but area of each tile exc 0.11 sqm and n exc 0.18 sqm.

M&L for coloured glazed Ceramics tiles 300x200x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 as a backing coat in patch work n exc 5.0 sqm each patch complete all as specified and directed.

All as per item No 50 here-in-before but of size 350 x 250 x 7mm / 450 x 350 x 7mm/ 450 x 300 x 7mm.

M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

All as per item 52 above but in skirting and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 15mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles complete all as specified and directed.

M&L for rendering 10mm thick in cm 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick surface and finished the surface even and smooth without using extra cement and mixed with WPC @ 3% by the weight of cement or as per manafacturers instruction complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for rendering 5mm thick in cm 1:3 on concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound.

M&L for patch repairs n exc 3.0 sqm each in plastering 10 mm thick in CM 1:4 incl finishing the surface even and smooth without usinhg extra cement complete all as specified and directed.

M & L preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer all as spd and directed.

M&L for three coats of white wash on ceiling including priparation of surface complete all as spd and directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide zinc primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any descrption over 10mm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass of any thickness/Size or quality from aluminium door / window frame fixed With rubber packing and aluminium beading and S&F 5.5mm thick sheet glass plain ordinary quality area exceeding 0.50 sqm in each pane complete all as specified and as directed.

Hacking out old broken glass of any thickness/Size or quality from wooden/metal frame fixed With putty/beading & S&F 3mm thick sheet glass, not exc 0.5 sqm in each pane complete all as specified and as directed.

All as pr item No 65 here-in-before but frosted glass

S & F 15mm GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in any position or location including taking down old GI tubing etc complete all as specifed and as directed.

All as per item No 67 here-in-before but 20mm bore.

All as per item No 67 here-in-before but 25mm bore.

Removal of air lock/blockage of water in GI tubing 15/20mm bore of any type incl taking down (if reqd), cleaning the pipe or fitting etc and refixing the same in position complete all as specified and as directed.

S & F in repairs brass spindle suitable for 15mm bore bib cock/stop cock/angle cock/CP pillar cock complete all as specified and as directed.

S & F in repairs brass spindle suitable for 15 mm bore wall mixer/WHB Mixer /Sink Mixer all as directed.

S&F in repairs bib tap of PTMT for 15mm bore pipe complete all as specified and directed.

S&F in repairs fancy type brass chromium plated bib tap for iron pipe of 15mm bore with crutch or butterfly handle. screwed down high pressure complete all as specified and directed.

S&F in repair CP Brass long body bib cock 15mm bore complete all as specified and directed.

S&F in repairs 15mm bore brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified and directed.

S&F in repairs ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe for the following sizes all as specified and directed.

15 mm bore

20 mm bore

25 mm bore

S&F in repairs in chromium plated brass angle valve with long shank and cup (concealed type) suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repairs stop cock cost copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs chromium plated brass stop cock fancy typescrewed both ends high pressure for 15mm bore iron pipe or ferrule complete all as specified.

Cleaning of blockage in rain water pipe by removing the Cl grating and roding etc and refixing old Cl grating in position in cement mortar 1:6 complete all as directed and as specified.

S&F in repairs PVC connection pipe 600 mm long suitable with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified as directed.

Supply and fix in repairs shower rose chromium plated brass fancy type 125 size with or without swivel any size, including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair Overhead shower 200x200mm square shape single flow (ABS Body Chrome plated with gray face plate) with Rubit cleaning system complete all as specified and directed.

S&F in repairs PTMT waste coupling (half or full threaded) 32mm bore for WHB/sink complete all as specified and directed.

S&F in repairs waste fitting (coupling) brass chromium plated 32mm bore for WHB complete all as specified and as directed.

All a per item No 86 here-in-before but 40mm bore.

S&F in repairs PVC syphon with rod for low level flushing cistern incl PVC handle with adjustable lever (flushing cistern kit) complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity double layered hoisted and fixed in position and connecting up pipes complete all as specified and directed.

All as per item No 89 here-in-before but 1000 litres capacity.

S&F in repairs flush handle PVC with adjustable Lever and hook for low level flushing cistern complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PVC flush pipe of 32mm dia pipe for connecting low level flushing cistern including jointing to WC complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 10 Itrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle. Brackets for bottom support fixing with gutties embeded in wall etc complete all as specified and as directed.

S&F in repairs 32mm bore and 750mm long PVC waste pipe for WHB complete all as specified and as directed by Engr-in-Charge.

All as per item No 94 here-in-before but 40mm bore.

S&F in repair cover for PVC Water Tank of any capacity complete all as specified and directed.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S & F in repair vitreous china Urinal bowl flat back white excluding flushing cistern but including grating and union for discharge pipe etc complete all as specified and directed.

S&F in repapir plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specined and as directed.

S&F in repairs vitreous china, squatting pan, of pattern long pan, size 580mm x 440mm white, with 'P' or 'S' Trap front or back inlet and foot rests any pattern, including concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin white flat back of size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket / fixing with fastner etc complete all as specified.

S&F in repairs chromium plated Jet Spray for WC with 100 cm long PVC pipe including neccessary Gl fitting complete all as specified and directed

S&F repair health faucet cromium plated with 1500mm long pipe complete all as specified and as directed.

S&F in repairs chromium plated pillar cock with 200mm Extension body as per Cat No. 29021 of make Jaguar ‘‘Fusion' Quarter Turn Series or equivalent model of specified make all as directed.

S&F in repairs chromium plated fittings angular stop cock with wall flange 15mm dia as per Cat No. FUS-29053 of make Jaquar ‘Fusion' Quarter Turn' Series or equivalent model of specified make all as directed.

S&F in repairs chromium plated two way bib cock with wall flange 15mm dia of Cat No. 29041 of make ‘Fusion (Quarter Turn)' Jaquar or equivalent model of specified make all as directed.

S&F in repairs chromium plated towel rail 24" long including built in side brackets, as per Cat No. 7711 of make Jaguar ‘QUEEN'S COLLECTION' Series or equivalent model of specified make all as directed.

S&F in repairs chromium plated toilet paper holder, as per Cat No. 7753 of make Jaguar ‘‘QUEEN'S COLLECTION' Series or equivalent model of specified make all as directed.

S&F in repairs chromium plated soap dish, as per Cat No. 7731 of make Jaguar ‘QUEEN'S COLLECTION' Series or equivalent model of specified make all as directed.

S&F brass cromium plated tubeler towel rail 20 mm dia complete all as specified and directed.

S&F brass cromium plated brackets complete all as specifed and directed.

S&F in repairs aluminium die cast body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

S & F in repair sink with drainboard made out of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe for over all size 1145mm x 510mm, bowl size 560mm x 410mm x 200mm etc complete all as specified and directed.

S&Fin repairs stainless steel, sink 1 mm thick for kitchen or laboratory, with plugs, waste pipe, washers; incl bedding in cement mortar on to dwarf wall or including fixing cantilever CI Brackets, connecting union etc & connecting to inlet/out let for smooth functioning size of sink 495 x 420mm overall and bowl size 410mmx330mmx160mm, including PVC connection, CP waste coupling, etc. complete all as specified and directed.

S&F in repairs Stainless steel Plate rack made of sheet grade SS-304, thickness not less 0.63mm of standard size (36” x 36” x 10”) & approved quality of finish, complete all as specified & directed.

S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall of size 110mm bore complete all as specified and as directed

All as per item No 119 here-in-before but 75mm bore.

S&F PVC (SWR) bends any radius 110 mm bore provided with access door complete all as specified and directed.

All as per item No 121 here-in-before but 75mm bore.

Cleaning and removing of all scales and dirt etc from tanks and from mouths of circulating pipes etc of 250 to 500 Itr Capacity tanks incl washing the tanks and draining out dirty water complete all as directed.

All as per item No 123 here-in-before but exc 500 Ltrs and not exc 1000 Ltr Capacity.

Sanjay Glass

Suma Construction

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD