repair renovation of Qtr No 10 block 03 at Channi Himmat Jammu

Amount

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead including all carriages and cost of material involved.(1:4) Mix (1 cement : 4 course sand).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. Including all carriages and cost of material involved.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (as directed by the EIC at site).

Providing / fixing powder coated aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including 5mm thick glass, including cleat angle, aluminum snap beading for glazing / paneling, C. P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge (including glazing and paneling) for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required including all fittings complete.

Providing and fixing Ceramic glazed Floor tiles wherever required of size 1'0"x1'0" or above above in floors or as directed by EIC of approved make like NITCO, KAJARIA or equivalent etc. over 12 mm thick bed of cement mortar 1:4 and jointing with grey cement slurry including pointing in white cement mixed with pigment of matching shade complete, including all leads, lifts, costs and carriages of all materials involved.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Providing and laying in position vitrified floor tiles (2'0" x 2'0") premium quality in floors of approved make like NITCO, KAJARIA or equivalent etc. over 20 mm thick bed of cement mortar 1:4 and jointing with grey cement slurry including pointing in white cement mixed with pigment of matching shade complete, including all leads, lifts, costs and carriages of all materials involved.

Providing and fixing C.P. fittings and sanitary ware of approved brand (Jaguar , Cera or equivalent. as directed by EIC).

C P Bib Cock long nose

C P Grating

Sink Complete 18x18

W. C. one piece (Western) with PVC flushing cistern and all fixtures complete.

Making cupboard using waterproof ply 19mm thick all sides and for shelves, 1 mm thick mica all fixtures and fittings complete in all respects including glazing, enameled paint etc and costs and carriages of all materials involved.

Providing & Fixing of PVC wall panelling including cost of nails and screws and all carriages and cost of material involved complete.(Standard make and approved by the EIC at site).

M/S RISHAV BHARDWAJ CONTRACTOR

Chand Kumar Bhat

Ranjit chopra