Provision of additional high level full length passenger PF & FOB (6m wide) at Mandi Adampur station of Bikaner Division under ADEN/Sirsa.

Item Breakup - A-CPWD DSR-21 items

Item Breakup - B-IRUSSOR-21 items

Plate Girder/Composite Girder (Steel Work)

Extra for using steel conforming to Grade MT Designation E350 instead of Grade Designation E250 of Quality "B0" as per IS: 2062

Supplying and fixing HSFG bolts of any dia Kg and any length with suitable nuts including DTI washers conforming to IRS-B1-2001 for bridges and s t e e l structures with contractors labour, tools and plants and lead and lift etc., complete. Metallizing of steel work of girders with sprayed aluminium after surface preparation by Sand/grit blasting, followed by one coat of etch primer (IS:5666) & one coat of Zinc Chrome primer (IS:104) and two coats of aluminium paint (IS:2339) with all labour, T&P and material as a complete job duly conforming to all relevant specifications and process given under Clause 39 of IRS-B1-2001. Note: Nominal Thickness of sprayed Aluminium coating shall be 150 microns. DFT of Zinc chrome primer shall be 25-30 microns and DFT of each coat of Aluminium paint shall be 12-14 microns.

On new girder during fabrication Total 5783516.60 Item- 2 All items of "All other chapters" of IRUSSOR (Amended up to date) except mentioned above. S No. Item No Description of Item Unit Qty Rate Amount BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY Providing portable fencing along running track where work is to be done in close vicinity of track, maintaining during execution of work and removing after completion of the work as per direction of the Engineer. Fencing shall consist of self supporting steel angles of size 50mm x 50mm x 6mm, 1.5m long provided with hooks etc. and embedded in CC 1:2:4 block of size 0.23m x 0.23m x 0.23m placed at c/c distance of 2m along track. 12mm dia rods in three horizontal layers shall be tack welded with angle posts. Note : Released material will be property of the contractor after completion of work. Cost of cement required for CC blocks shall be paid separately.

With provision of one 50mm wide retro- Metre reflective tape in horizontal direction, duly secured/tight with vertical posts. Exploratory drilling of boreholes down to required depth, drilling of 150mm dia. boreholes in all type of soils except hard rock & large boulders (boulder core more than 30cm) including refilling, reinstating surface and disposing off surplus material including use of mechanical rigs with power operated winches as well as percussion/chiselling tool for advancing through occasional seams of hard strata to be employed, where necessary in Dry area.

0m to 10m Conducting in-situ full size Plate Load Test (PLT) at selected location as per IS:1888 including making loading arrangements & casting of RCC/cast in-situ concrete footing as per codal provisions including excavation and refilling of trial pit.

Plate size 45cm x 45cm

Taking out 100mm dia. & 450mm long Each undisturbed samples of soil from bore holes, including provision of air tight containers for packing and, labeling incl. transporting the samples to laboratory. Piston sampler shall be used for extracting undisturbed samples where necessary. Samples shall be collected as per IS:2720.

Taking out 100mm dia. & 450mm long Each disturbed samples of soil from bore holes, including provision of air tight containers for packing, labeling and transporting the samples to laboratory. Samples shall be collected as per IS:2720.

Conducting standard penetration test as Each per IS:2131 at approximate1.5m intervals in bore holes, as directed by the Engineer in charge Conducting laboratory Tests on collected soil samples as per relevant IS code

Moisture Content/Dry Density

Atterberg Limits

Specific Gravity

Grain size analysis including Hydrometer Each analysis

Direct Shear Test

Natural Density

Consolidation Test BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY

Unconfined Compression Test

Tri-axial Test Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

JCB Backhoe Loaders 3DX Plus or similar Hour with minimum 1.10 cum bucket capacity Total 193515.96