Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹12.5 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹13.6 L+₹4,995 (0.37%)Rejected-Finance OLD AIRPORT ROAD W ANBAL SRINAGAR J K 190005 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-2 | Rejected-Finance Other than L-1 | |
| 3 | L-3₹13.8 L+₹26,970 (1.99%)Rejected-Finance | L-3 | Rejected-Finance Other than L-1 | |
| 4 | L-4₹14.8 L+₹1.3 L (9.40%)Rejected-Finance 0 GHULAM MOHAMMAD AND CO 0 GURUDAWARA II RAWALPORA SRINAGAR JAMMU AND KASHMIR RAWALPORA SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-4 | Rejected-Finance Other than L-1 | |
| 5 | L-5₹14.9 L+₹1.3 L (9.59%)Rejected-Finance | L-5 | Rejected-Finance Other than L-1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
21 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt. Col Preetham P GE
GE 970 EWS C/o 56 APO PIN-913970
REPAIR AND MAINT OF EXTERNAL ELECTRIC NETWORK INCLUDING LT OH LINES UG CABLES CABLE JOINTS LT POLES INSULATOR STAY ASSY ETC AND CONNECTED WORKS AT OLD AIR FIELD UNDER GE 970 EWS
2024_MES_639542_1
GE 970 EWS-67/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
OLD AIR FIELD SRINAGAR
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹50,000
Yes
4 Apr 2024
29 Jan 2024
27 Feb 2024
29 Jan 2024
21 Feb 2024
14 Feb 2024
Amount
Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr in wide and not exc. 1.5m in depth for taking out / laying of under ground cable in trenches or cable ducts complete all as specified & directed.
Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr in wide, exceeding 1.5 m depth and not exc. 3.0 m in depth for taking out / laying of under ground cable in trenches or cable ducts complete all as specified & directed
Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil after repairing / jointing and laying and testing of cables complete all as specified & directed
Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 mtr above from the starting point complete all as specified & directed
M&L natural river sand as cushioning of cables including spreading and punning down all as per clause No 19.75 of SSR part -I complete all as specified & directed. Note : punned thickness shall be measured for payment purpose
Supply and lay brick of conventional size 230x110x75mm, sub class 'B' locally available as protection of cable in trenches complete all as specified & directed.
Material & Labour for galvanised steel wire 4 mm dia to be stringed as continuous earthing wire on over head LT lines including taking down the old rusted earth wire complete all as specified and directed.
M&L for 50mm dia GI pipe light grade for cable protection and sealing both ends including taking out old pipe complete all as specified & directed
M&L for 80mm dia GI pipe light grade for cable protection and sealing both ends including taking out old pipe complete all as specified and directed.
M&L for 40mm dia GI pipe light grade for cable protection and sealing both ends including taking out old pipe complete all as specified and directed.
Taking down old unserviceable LT UG cable from any description (tranches, walls, ceilings.,etc) from various locations, including any length, supply and laying under ground LT cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 16 Sq mm, 4 core, with aluminium conductor with suitable size aluminium cable lugs and jointed in any description complete all as specified and directed. NOTE:- 1. Excavation , concrete cable protection bicks, pipe, PCC work for crossing/hard standing and sand for cushioning will be measured and paid separately. 2. Cost of aluminium cable lugs (eye lid/barrel/bottle neck type/ring type or any shape), gable gland, new nut bolt and washers of required size shall be deemed to be included in the unit rate quoted by the tenderer.
Description all as per item Sl No 11 above but of size 16 sqmm 2 core
All as per item Sl No 11 above but of size 25 sqmm 4 core
All as per item Sl No 11 above but of size 35 sqmm 3.5 core
All as per item Sl No 11 above but of size 50 sqmm 3.5 core
All as per item Sl No 11 above but of size 70 sqmm 3.5 core
All as per item Sl No 11 above but of size 95 sqmm 3.5 core
All as per item Sl No 11 above but of size 120 sqmm 3.5 core
Supply & fixing in repair 400 A 4 pole MCCB, 35 KA, 415V, 50 Hz, AC supply adjustable over load and short circuit with micro processor release setting including necessary cable lugs & wire etc complete all as specified and directed
Supply & fixing in repair 250 A 4 pole MCCB, 35 KA, 415V, 50 Hz, AC supply adjustable over load and short circuit with micro processor release setting including necessary cable lugs & wire etc complete all as specified and directed
Supply & fixing in repair 200 A 4 pole MCCB, 35 KA, 415V, 50 Hz, AC supply adjustable over load and short circuit with micro processor release setting including necessary cable lugs & wire etc complete all as specified and directed
Supply & fixing in repair 160 A 4 pole MCCB, 35 KA, 415V, 50 Hz, AC supply adjustable over load and short circuit with micro processor release setting including necessary cable lugs & wire etc complete all as specified and directed
Supply & fixing in repair 125 A 4 pole MCCB, 35 KA, 415V, 50 Hz, AC supply adjustable over load and short circuit with micro processor release setting including necessary cable lugs & wire etc complete all as specified and directed
Supply & fixing in repair 100 A 4 pole MCCB, 25 KA, 415V, 50 Hz, AC supply adjustable over load and short circuit with micro processor release setting including necessary cable lugs & wire etc complete all as specified and directed
Supply & fixing in repair 63 A 4 pole MCCB, 25 KA, 415V, 50 Hz, AC supply adjustable over load and short circuit with micro processor release setting including necessary cable lugs & wire etc complete all as specified and directed
M&L in repair for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 4mm dia galavanised earth wire as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing point of outdoor panel boards all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel, 15mm dia GI light grade pipe for protection, complete all as specified and testing on completion.
Taking out old unserviceable steel tubular/RCC poles 9 mtr long and supply and erection of steel tublar swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9.0 mtr long) and shifting of conductors and insulators etc incl painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer. Marking of pole number with black paint in yellow circle acomplete all as specified & directed
M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia all complete all as specified & directed
Supply and fixing in repair on load change over switch in sheet metal enclosure of capacity 4P 63 Amps front / side operate type, complete all as specified and directed.
S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 45W mounted on MCPCB suitable for 35mm dia pipe , protection IP-66 complete all as specified and as directed Make: Havells LHETAXU7PNJ045 or equivalent in Philips/ Crompoton
S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 60W mounted on MCPCB suitable for 50mm dia pipe , protection IP-66 complete all as specified and as directed Make: Havells LHETAXU7PNJ060 or equivalent in Philips/ Crompoton
S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 70W mounted on MCPCB suitable for 50mm dia pipe , protection IP-66 complete all as specified and as directed Make: Havells LHETAXU7PNJ070 or equivalent in Philips/ Crompoton
S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 90W mounted on MCPCB suitable for 50mm dia pipe , protection IP-66 complete all as specified and as directed Make: Havells LHETAXU7PNJ090 or equivalent in Philips/ Crompoton
Taking down after disconnection of old UNSV of street/security/road/post top light fitting and supply and fixing of 30 watt LED based energy saving & environment friendly long life versatile luminaire made in pressure die cast housing and heat sink with aluminum extruded with IP- 65 of complete with front toughened glass cover including connection with 2.5 sqmm 3 core PVC insulated copper wire complete all as specified. Make: Cat part no. BCLST 30W LED of bajaj or equivalent in Havells/CG
Supply and fixing in replacement LED high mast light fitting of 200 watts with driver inside a pressure die cast alumnium housing with toughened front glass cover, IP65 degree of protection complete all as specified and directed. MAKE:-Havells /Wipro / Crompton Greaves.
Material & labour for PCC 1:4:8 type D2 using 40mm stone aggregate for pole foundation complete all as specified and directed.
Material & labour for PCC 1:3:6 type C-1 using 20mm stone aggregate for coping of poles etc complete all as specified and directed.
Material & labour for PCC 1:2:4 type B-1 using 20mm stone aggregate for coping of poles etc complete all as specified and directed.
Material & labour in repairs Galvanised iron strip 32x6 mm buried in ground complete all as specified and directed.
Material and labour in repairs for stay assembly complete with all section such as stay plate, stay clamps, stay brackets with 20mm dia stay rod complete all as shown in electrical plate No 1 of SSR Part-I complete all as specified and directed NOTE : Loop insulator, excavation and concrete work will be measured and paid separtely.
Material and labour in repairs for GI 4mm dia for earth continuity conductor complete all as specified and directed
M/s Bashir Enterprises
M/S Noor Mohammad Shalla
M/S GHULAM MOHAMMAD AND CO.
M/S MIR SAJAD ENTERPRISES
M/S M.Y Enterprises
M/S BHAT ENGINEERING WORKS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .