LIMITED E-TENDER FOR UPGRADATION OF PCVO REST ROOM AND CONTRACT LABOUR ROOM AT SOLAPUR LPG PLANT

PRICE BID FORMAT

BHARAT PETROLEUM CORPORATION LIMITED, SOLAPUR LPG PLANT

LIMITED E-TENDER FOR UPGRADATION OF PCVO REST ROOM AND CONTRACT LABOUR ROOM AT SOLAPUR LPG PLANT

SHORT DESCRIPTION LONG DESCRIPTION QUANTITY UNIT AMOUNT

Upgradation of PCVO Rest Rooms and Contract Labour Rooms

Earth work in excavation upto required depth below existing ground level upto required depth including removal of vegetation,shrubs and debris,

cutting and dressing the sides in slopes and bottom, levelling, grading and ramming of bottoms,bailing out of water, supplying of Temporary

supports to existing services line like water pipes,sewage pipes,electric overhead and u/g cables etc all if encountered, shoring, strutting and

EXCAVATION 1.5 TO

1 disposal of excavated earth outside BPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including necessary 45 M3

permissions from local authorities (if required) and charges( if any), complete. Payment shall be made as per the actual measurement but not more

than excavation plan.No payment would be made for extra excavation for making slopes etc. (Payment against this item shall be released only for

the earth being disposed outside BPCL premises)

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains,fillings, non-suspended floors,

pavements & ramps or any other works etc.including the cost ofposition cement concrete of specified grade including the cost ofcentring and

2 shuttering, tamping, ramming, vibrating,curing, in anyshape,position,thickness and finishing the top surface rough or smooth,etc. all complete as per 16 M3

directions of Engineer-in-charge. - All work upto plinth level

1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Supplying and Filling murrum obtained from approved quarries free from all organic vegetation and foreign matter including all royalities, taxes,

handling and transportation to site, spreading in layers not exceeding 150 mm thick inside BPCL premises, watering,compacting by suitable

3 MURRUM FILLING compactors. The density to be achieved shall not be less than 90% of the density obtained in the laboratory (modified proctor method) . Murrum 85 M3

having standard proctor laboratory maximum dry density of less than 1.8 gms/cc shall not be used. The murrum shall have a Plasticity Index of 7-

17(medium Plastic) and not more than 20% Fines,i.e., Clay. Particle size grading shall be 20mm and down size.

RCC DESIGN MIX CONCRETE , MIXED AT SITE, Strength as specified, at all levels - Contractor should set up a batch mixing plant at siteSupplying and

laying in postion RCC design mix cement concrete specified grade with20mm and down size graded crushed stone aggregate in sub structure ofall

types including placing of concrete,supplying pockets,openings,recesses, chamfering wherever required etc., vibrating, tamping, curingand

4 RCC DESIGN MIX M25 42 M3

rendering if reqd. to give a smooth and even surface etc. allcomplete (excluding the cost of reinforcement, but including the cost ofcentring and

shuttering)for all height above plinth level in any shape,position, thickness etc. all complete as specified and directed. Onlysteel shuttering will be

used so as to obtain required finish. Theheight of shuttering shall not exceed 1.5 m per lift of concrete.

Supplying and placing HYSD steel reinforcement of Grade 500 (TMT) conforming to IS 1786 in position for RCC worksincluding straightening, cutting,

STEEL bending, placing in position andbinding with 16 SWG black soft annealed binding wire at everyintersection, supplying and placing appropriate cover

REINFORCEMENT block all completeincluding cleaning and making it free from oil, grease etc. complete-for all heights and depths and conforming to relevant IS code

(Make: SAIL,TATA, JSW, ESSAR, VIZAG STEEL or approved equivalent make conforming to IS code)

BRICK MASONRY BELOW PLINTH: Providing and laying Brick work withbricks having compressive strength not less than specified and conforming to

BIS std. of specified class and above, satisfying efflorescene,water absorbtionand dimension test as per IS code) infoundation and plinth in Cement

6 BRICKWORK CL CS 40 mortar 1:5(1 cement: 5 Coarse sand) asper specifications in one or more brick thickness including soaking of bricks, providingopenings, recesses 42 M3

,scaffolding,staging, curing, finishing the jointsflush below ground level and raking out joints etc. all complete, as perdirections of Engineer-in-charge.

BRK MSN PL CS CL40

CEMENT PLASTER Providing cement plaster finished including cleaning,hacking of base surfaces, scaffolding,curing,finishing etc. all complete for all

PLASTER 12MM CS heights as per specifications and directions of Engineer-in-charge including grooves, bands, drip moulder where ever required as specified. also

1:5 including providing 20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting points in 300mm wide strips (150mm on on

each surface) fixed with G.I. "U" type nails before plastering.(Payment will be made separately for chicken wire mesh).

Breaking and removing the existing brick bat coba, exposing the concreteslab and cleaning the same thoroughly as directed,hacking the surface

8 BRICK BAT COBA SLAB ofconcerete and laying fresh brick bat coba as directed with proper slope,curing the same by stagnating water continously as directed 110 M2

includingsurface finish with 40mm thick C.M.1:6

Preparing surface and painting of approved make, shade and quality in all heights of walls,ceiling, sun sheds fins etc. incl. providing

scaffolding,pitting in plaster to be made good, cleaning with coir brush & sand paper, curing and supply of all materials and labour complete. The

BLD PNT CMT PRIM

9 finished surface shall be even and uniform.The application of paint shall conform to Manufacturer's recommendation and as per the directions of 350 M2

Enginner-in-Charge.

2 coat of Cement Primer

Preparing surface and painting of approved make, shade and quality in all heights of walls,ceiling, sun sheds fins etc. incl. providing

scaffolding,pitting in plaster to be made good, cleaning with coir brush & sand paper, curing and supply of all materials and labour complete. The

BLD PNT ACRYLIC

10 finished surface shall be even and uniform.The application of paint shall conform to Manufacturer's recommendation and as per the directions of 350 M2

Enginner-in-Charge.

2 coats ACRYLIC EMULSION

Tiling, Flooring, Window and Door Works

Supplying and laying vitrified ceramic tiles with water absorption less than 0.08% and conforming to IS : 15622, of approved make, colour and design

at all levels and locations using approved first quality tiles inflooring with or without spacers, laid over abedding of cement mortar bed of mix 1:4 to

achieve overall flooring thickness as 50mm and a backcoat of white cement slurry and joints filled with white cement mixed with matching pigment

11 VITRIFIED 600x600x10 105 M2

complete with all bye works like covering

with plaster of paris, curing etc. at all leads and lifts and as perspecification / instructions of the Engineer Incharge.

Using 600mm x 600mm x minimum 10mm thk.

Providing and laying Granite flooring including flooring onkitchen counter slabs and wash basin counter slabs with 18mm - 20mm thickmarble stone

(sample of marble shall be approved by Entineer-in-charge)over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarsesand) laid and

12 GRANITE SLAB 8 M2

jointed with grey/white cement slurry mixed with matching pigment, epoxy touch ups including rubbing, curing, and polishing to edgespolishing to

granolithic finish complete with Granite of any size, shape and shade

Supplying, fitting & fixing in position specified type of anodised (15 microns), fully glazed, heavy duty aluminium windows & ventilator with frame of

min. 2mm thick, overall 75mm wide approved shade, aluminium sheet louvers fixed at 50mm, bent to shape including providing min. 3mm

13 aluminium sheet side members for framing the louvers (Aluminite, Aldowin, Jindal or any make with prior approval of BPCL) in standard sections as 16 M2

per IS 1948 or as per directions of Engineer-in-Charge & including providing & fixing specified type of glass with felt, aluminium beading, glazing clips

& special sashputty of approved make etc. all Complete as perinstructions of Engineer-in-Charges.Louvers with 5.5mm translucent glass.

Supplying, fitting & fixing in position specified type of electrostatically powder coated (50 microns), fully glazed, heavy duty aluminium windows &

ventilator with frame of min. 2mm thick, overall 75mm wide approved shade, aluminium sheet louvers fixed at 50mm, bent to shape including

providing min. 3mm aluminium sheet side members for framing the louvers (Aluminite, Aldowin, Jindal or any make with prior approval of BPCL) in

standard sections as per IS 1948 or as per directions of Engineer-in-Charge & including providing & fixing specified type of glass with felt, aluminium

DOORS FOR ROOMS

beading, glazing clips & special sashputty of approved make etc. all Complete as perinstructions of Engineer-in-Charges.Louvers with 5.5mm opaque

Miscelleneaous Electrical Works

Supply, fitting and fixing of LED Tublelights 30w (approx 20 Nos.), Switch Boards 230 V including fan regulator, light switch, charging ports 12X8 inch

as directed (8 Nos.), RCCB and/or ELCB and/ or MCCB 30 mA, Fans 1200 mm 3 Blade of Bajaj, Havels or Crompton (4 Nos.), 3 Nos. power points for

15 ELECTRICAL WORKS 1 LS

heavy duty machinery upto 230 V including complete wiring charges and covering through cable covers and fixing of specified amperes as directed

by officers incharge