Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.4 LAccepted-AOC WARD NO 11 HOUSE NO 305 JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC L1 | |
| 2 | L2₹46.7 L+₹3.9 L (9.08%)Rejected-Finance WARD NO 1 HOUSE NO 04 SUBASH NAGAR UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹48.3 L+₹5.5 L (12.9%)Rejected-Finance JAJJAR KOTLI JAMMU J K 151222 | JAMMU | JAMMU | J K | 151222 | L3 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | PARDEEP SHARMA L1 | BARU ENTERPRISES L3 | DAVINDER SINGH L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of soft/loose soil, complete all as specified and directed by Engr-in-Charge. | 239.93 | Cum | 130 ₹31,190.9 Lowest | 250 ₹59,982.5 | 140 ₹33,590.2 |
| 2.00 | Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25cm thick after pipes have been laid and tested, complete all as specified and directed by Engr-in-Charge. | 205.75 | Cum | 30 ₹6,172.5 | 30 ₹6,172.5 | 25 ₹5,143.75 Lowest |
| 3.00 | Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed by Engr-in-Charge. | 34.17 | Cum | 30 ₹1,025.1 | 30 ₹1,025.1 | 25 ₹854.25 Lowest |
| 4.00 | Taking up or down CI/DI/MS water mains pipe 300 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engr-in-Charge.
Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. | 78 | RM | 100 ₹7,800 | 50 ₹3,900 | 40 ₹3,120 Lowest |
| 5.00 | Refixing MS/DI/CI pipe obtained from item No. 4 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 300 mm bore complete inlcuding main / branch connections, complete all as specified and directed by Engr-in-Charge. | 6 | RM | 100 ₹600 | 50 ₹300 Lowest | 300 ₹1,800 |
| 6.00 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engr-in-Charge. | 72 | RM | 5,500 ₹3,96,000 | 4,600 ₹3,31,200 | 3,000 ₹2,16,000 Lowest |
| 7.00 | Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings, complete all as specified and directed by Engr-in-Charge. | 90 | RM | 40 ₹3,600 | 50 ₹4,500 | 10 ₹900 Lowest |
| 8.00 | Refixing GI/CI pipe obtained from Item No. 07 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections, complete all as specified and directed by Engr-in-Charge. | 6 | RM | 100 ₹600 | 30 ₹180 Lowest | 120 ₹720 |
| 9.00 | Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc, complete all as specified and directed by Engr-in-Charge. | 84 | RM | 1,000 ₹84,000 Lowest | 1,800 ₹1,51,200 | 1,750 ₹1,47,000 |
| 10.00 | Taking up or down old unseviceable GI pipe of size 100 mm dia including all fittings, complete all as specified and directed by Engr-in-Charge. | 126 | RM | 30 ₹3,780 | 30 ₹3,780 | 10 ₹1,260 Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
29 Aug 2025, 6:00 pmClosed
GE (UTILITIES) UDHAMPUR
GE (UTILITIES) UDHAMPUR, PO-GARHI, PIN-182121
Repair/Replacement Pipe Line control valve Pumping system and Switchgear installed at B Reservoir area under GE (Utilities) Udhampur.
2025_MES_723811_1
GE/U-49/2025-26
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (UTILITIES) UDHAMPUR
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (UTILITIES) UDHAMPUR
₹98,000
17 Oct 2025
1 Aug 2025
1 Sept 2025
1 Aug 2025
29 Aug 2025
15 Aug 2025
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of soft/loose soil, complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25cm thick after pipes have been laid and tested, complete all as specified and directed by Engr-in-Charge.
Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed by Engr-in-Charge.
Taking up or down CI/DI/MS water mains pipe 300 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor.
Refixing MS/DI/CI pipe obtained from item No. 4 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 300 mm bore complete inlcuding main / branch connections, complete all as specified and directed by Engr-in-Charge.
Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engr-in-Charge.
Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings, complete all as specified and directed by Engr-in-Charge.
Refixing GI/CI pipe obtained from Item No. 07 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections, complete all as specified and directed by Engr-in-Charge.
Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc, complete all as specified and directed by Engr-in-Charge.
Taking up or down old unseviceable GI pipe of size 100 mm dia including all fittings, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 10.00 here-in-before but of size 80 mm dia and cradit is the property of the contractor, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 10.00 here-in-before but of size 50 mm dia and cradit is the property of the contractor, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 10.00 here-in-before but of size 40 mm dia and cradit is the property of the contractor, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 10.00 here-in-before but of size 25 mm dia and cradit is the property of the contractor, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 10.00 here-in-before but of size 20 mm dia and cradit is the property of the contractor, complete all as specified and directed by Engr-in-Charge.
Refixing GI/CI pipe obtained from Item No. 10.00 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 100 mm dia complete including main branch connections, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 16.00 here-in-before but of size 80 mm dia obtained from item No 11.00, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 16.00 here-in-before but of size 50 mm dia obtained from item No 12.00, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 16.00 here-in-before but of size 40 mm dia obtained from item No 13.00, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 16.00 here-in-before but of size 25 mm dia obtained from item No 14.00, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 16.00 here-in-before but of size 20 mm dia obtained from item No 15.00, complete all as specified and directed by Engr-in-Charge.
Supply & fixing GI pipes of size 100 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 22.00 here-in-before but of size 80 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 22.00 here-in-before but of size 50 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 22.00 here-in-before but of size 40 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 22.00 here-in-before but of size 25 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 22.00 here-in-before but of size 20 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 22.00 here-in-before but of size 15 mm dia, complete all as specified and directed by Engr-in-Charge.
Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop for repairs. Reassembling of sluice valve and fixing on its original position, complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item
Stem bush bronze
Gland flange cast iron
Stud/Bolt carbon steel
Stem nut/chaknut
Stem Stain less steel
Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position, complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item
Stem bush bronze
Gland flange cast iron
Stud/Bolt carbon steel
Stem nut/chaknut
Stem Stain less steel
Decoupling, disconnecting sluice valve of size 200 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position, complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item
Stem bush bronze
Gland flange cast iron
Stud/Bolt carbon steel
Stem nut/chaknut
Stem Stain less steel
Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position, complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item
Stem bush bronze
Gland flange cast iron
Stud/Bolt carbon steel
Stem nut/chaknut
Stem Stain less steel
Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 100 mm to 150 mm bore, complete all as specified and directed by Engr-in-Charge.
Supply and fix Nut bolt M-16 (50mm length) & M-20 (75mm length) with 02 (each 5mm thick) Nos washer at each set, complete all as specified and directed by Engr-in-Charge.
Supply and fixing leather gasket including replacement old UNSV gasket for 200 mm, complete all as specified and directed by Engr-in-Charge.
Supply and fixing leather gasket including replacement old UNSV gasket for 150 mm, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of cast iron non return valve, conforming to IS-5312, suitable for 200 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 37.00 here-in-before but of size 150 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 37.00 here-in-before but of size 100 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 37.00 here-in-before but of size 80 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 37.00 here-in-before but of size 50 mm dia, complete all as specified and directed by Engr-in-Charge.
M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 300 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 42.00.00 here-in-before but of dia 250 mm bore pipe, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 42.00 here-in-before but of dia 200 mm bore pipe, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 42.00 here-in-before but of dia 150 /100mm bore pipe, complete all as specified and directed by Engr-in-Charge.
Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 46.00 here-in-before but of size 250 to 300 mm bore pipe, complete all as specified and directed by Engr-in-Charge.
S&F of Gun-metal, globe or gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engr-in-Charge.
Description all as per ser item No 48.00 here-in-before but of size upto 40 mm dia, complete all as specified & directed by Engr-in-Charge.
Description all as per ser item No 48.00 here-in-before but of size upto 25 mm dia, complete all as specified & directed by Engr-in-Charge.
Description all as per ser item No 48.00 here-in-before but of size upto 20 mm dia, complete all as specified & directed by Engr-in-Charge.
Description all as per ser item No 48.00 here-in-before but of size upto 15 mm dia, complete all as specified & directed by Engr-in-Charge.
M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing, complete all as specified and directed by Engr-in-Charge.
M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling, complete all as specified and directed by Engr-in-Charge.
M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg, complete all as specified and directed by Engr-in-Charge.
Supply and fixing GI fittings medium grade ISI marked including complete all as required at site, complete all as specified and directed by Engr-in-Charge :-
Elbow 15mm
Elbow 20mm
Elbow 25mm
Elbow 40mm
Elbow 50mm
Elbow 80mm
Socket 15mm
Socket 20mm
Socket 25mm
Socket 40mm
Socket 50mm
Socket 80mm
Union 15mm
Union 20mm
Union 25mm
Union 40mm
Union 50mm
Union 80mm
Elbow reducer 20 x 15mm
Elbow reducer 25 x 20mm
Elbow reducer 40 x 25mm
Socket reducer 15x20mm
Socket reducer 25x20mm
Socket reducer 40x25mm
Socket reducer 40x20mm
Socket reducer 50x25mm
Nipple 15 x50mm
Nipple 15 x 75 mm
Nipple 15 x 100 mm
Nipple 15 x 150 mm
Nipple 20 x50mm
Nipple 20 x 75mm
Nipple 20 x100mm
Nipple 20 x 150mm
Nipple 25 x 50mm
Nipple 25 x 75mm
Nipple 25 x 100mm
Nipple 40 x 50mm
Nipple 40 x 100mm
Nipple 40 x 150mm
Nipple 50 x 50mm
Nipple 50 x 100mm
Nipple 50 x 150mm
Tee 15mm
Tee 20mm
Tee 25mm
Tee 20x15mm
Tee 25x20mm
Tee 40x15mm
Tee 40x20mm
Tee 40x25mm
Tee 50x25mm
Dead plug 15mm
Dead plug 20mm
Dead plug 25mm
Dead plug 40mm
Dead plug 50mm
Spunyarn
Material and labour for taking down by scraping and preparation the surface of the header approx 6 mtr long with sluice valve and NRVs at pump houses, OHT including repainting one coat of super quality of black enamel paint with one under coat of primer etc, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of cast iron sluice valve of size 300 mm (PN 1.6) (ISI Marked) with iron wheel head, both end flanged, stainless steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 58.00 here-in-before but of size 200 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 58.00 here-in-before but of size 150 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 58.00 here-in-before but of size 100 mm dia, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 58.00 here-in-before but of size 80 mm dia, complete all as specified and directed by Engr-in-Charge.
Material and labour for fabrication of MS sheets, angle iron in replacement of old pit cover with necessary welding work and one coat of red oxide primer to the welded works and painted with black enamel paint, complete all as specified and directed by Engr -in - Charge.
M & L for loose filling in pump houses, under header, under road cuttings etc of hard core broken to gauge not exc 63 mm broken stone/boulders incl leveling and spreading llime stone powder under stones, complete all as specified and directed by Engr-in-Charge.
M&L for neoprene rubber gasket sheet of size 1/8 " thickness 16" wide x 30" long heavy duty suitable for preparing gaskets for motor, valves,NRVs ,ARVs etc, complete all as specified and directed by Engr-in-Charge.
Decoupling, disconnecting suction line and discharge line taking down from foundation bolts, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line re-alignment commissioning and testing in respect of centrifugal/multistage pump of capacity 60/75/100 HP, complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch A.
Description all as per ser item No 66.00 here-in-before but capacity 30/40/50HP, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 66.00 here-in-before but capacity 25/20/15/12/10HP, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 66.00 here-in-before but capacity 7.5/5HP/3HP, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 66.00 here-in-before but capacity 270 HP, complete all as specified and directed by Engr-in-Charge.
Supply & Fix parts in repair for single/double/ multistage pumps of capacity 60/75/100 HP as per manufacturer's composition of existing make of pump as below, complete all as specified and directed by Engr-in-Charge.
Pump impeller CI/SS
Pump shaft stainless steel shaft complete with check nut and keys
Tyre coupling.
Star coupling
Gland cup with nuts and bolts
Shaft sleeves
Bearing housing
S&F parts for single/double/multistage pump of capacity 30/40/50HP as per manufacturer's composition of existing make of pump as below, complete all as specified and directed by Engr-in-Charge.
Pump impeller made out of Bronze.
Pump shaft stainless steel shaft complete with check nut and keys
Shaft sleeves
Casing bearing
Bearing housing
tyre coupling/star coupling
Gland cup with nut and bolts
S&F parts for single/double stage pump of capacity 25/20/15/12/10HP as per manufacturer's composition of existing make of pump as below, complete all as specified and directed by Engr-in-Charge.
Pump impeller
Pump shaft stainless steel shaft complete with check nut and keys
Shaft sleeves
Casing bearing
Bearing housing
tyre coupling/star coupling
Gland cup with nut and bolts
S&F parts for single/double stage pump of capacity 7.5/5HP/3HP as per manufacturer's composition of existing make of pump as below, complete all as specified and directed by Engr-in-Charge.
Pump impeller.
Pump shaft stainless steel shaft complete with check nut and keys
Shaft sleeves
Casing bearing
Bearing housing
tyre coupling/star coupling
Gland cup with nut and bolts
S&F parts for single/double stage pump of capacity 270HP as per manufacturer's composition of existing make of pump as below, complete all as specified and directed by Engr-in-Charge.
Pump impeller made out of Bronze.
Pump shaft stainless steel shaft complete with check nut and keys
Shaft sleeves
Casing bearing
Bearing housing
tyre coupling/star coupling
Gland cup with nut and bolts
Disconnecting electric connection of 60/75/100/270 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same. Cost of loading, unloading & transportation shall be deemed included in the quoted rates, complete all as specified and directed by Engr-in-Charge. Note: (a) Winding of motor stator & rotor shall be measured & paid separately. (b) Rewinding of motor will be measured and paid separately under relevent item. (c) The motor shall be squerrel cage induction motor. (d) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed. (e) The contractor shall be arranged a workshop visit of Engr-in-Charge for each job and cutting complete burnt winding of motor in presence of Engr-in-Charge.
Description all as per ser item No 76.00 here-in-before but capacity 30/40/50HP motor, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 76.00 here-in-before but capacity of 25/20/15/12/10HP motor, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 76.00 here-in-before but capacity of of 7.5/5HP/3HP motor, complete all as specified and directed by Engr-in-Charge.
Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class 'B' paper insulation inside the slots, rewinding the motor of capacity 270/100/75/60/50/40/30/ 25/20/15/12/ 10/7.5/5HP/3HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time, complete all as specified and directed by Engr-in-Charge. Note:- Cost of labour for winding deemed to be included in the rate quoted. Make : Atlas/Devi Dayal or equivalent make.
S&F in replacement of Pump bearing No. 6307 C3 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make
S&F in replacement of Pump bearing No. 6308 2RS1/C3 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make
S&F in replacement of Pump bearing No. 6309 M/C3 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. 6310 M/C3 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. 6311 C3 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. NU 304 ECP including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make
S&F in replacement of Pump bearing No. 7311 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. N411M including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make
Supply and fix in replacement of MS stud bolts of existing size with nuts suitable for pumps and motors of various capacity installed at installations, complete all as specified and directed by Engr-in-Charge.
M&L for spray painting of pump and motor, frame of capacity 270HP including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction, complete all as specified and directed by Engr-in-Charge.
M&L for spray painting of pump and motor, frame of capacity 60/75/100 HP including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction, complete all as specified and directed by Engr-in-Charge.
M&L for spray painting of pump and motor, frame of capacity 20/30/50HP including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction, complete all as specified and directed by Engr-in-Charge.
M&L for spray painting of pump and motor, frame of capacity upto 15HP including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction, complete all as specified and directed by Engr-in-Charge.
M&L for writing about the machinery installed in different instalations eg Cap, discharge,MES No,Year of installation and head of the machinery on the wall in front of the pump motor with flex board and fixing to the wall, complete all as specified and directed by Engr-in-Charge.
M&L in replacement of aluminium lugs suitable for 400 Sqmm aluminium cable including taking down the existing unserviceable one, complete all as specified and directed by Engr-in-Charge.
M&L in replacement of aluminium lugs suitable for 240 Sqmm aluminium cable including taking down the existing unserviceable one, complete all as specified and directed by Engr-in-Charge.
M&L in replacement of aluminium lugs suitable for 150 Sqmm aluminium cable including taking down the existing unserviceable one, complete all as specified and directed by Engr-in-Charge.
M&L in replacement of aluminium lugs suitable for 95 Sqmm aluminium cable including taking down the existing unserviceable one, complete all as specified and directed by Engr-in-Charge.
Supply and laying in replacement of synthetic rubber insulated mats 10 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006,( superseding IS 5424) suitable for electrical shock safety of sizes 2mx1m, complete all as specified and directed by Engr-in-Charge.
Supply and fix Gland packing type 3 of size 12 mm made of asbustus grip with silicon, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 100.00 here-in-before but 16 mm thick, complete all as specified and directed by Engr-in-Charge.
M&L for construction of stone masonary valve pit size 1.2 mtr x 1.2mtr x1.20 mtr (internal dimention) including stone work, PCC work and MS sheet work as per site requirment, complete all as specified and directed by Engr-in-Charge.
M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 95 sqmm inculding taking down existing old unserviceable cable of, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 103.00 here-in-before but 70 Sq mm, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 103.00 here-in-before but 50 Sq mm, complete all as specified and directed by Engr-in-Charge.
Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temp 30 to 120 degree celsious drop point 174 degree celsious, colourlight fawn, complete all as specified and directed by Engr-in-Charge. Make: Servo ( IOC)/Bhart petrolium/Castrol or equivalent make approved by E-in-C's Branch.
Supply only 0-Tolidine reagent (500 ml) for chlorine estimation with four nos chloroscope for various pump houses, complete all as specified and as directed by Engr-in-charge.
M&L for copper thimble suitable for 95/70 Sqmm single core copper cable including taking down the existing unserviceable one, complete all as specified & directed by Engr-in-Charge.
M&L for copper thimble suitable for 50/35 Sqmm single core copper cable including taking down the existing unserviceable one, complete all as specified & directed by Engr-in-Charge.
S&F MS clamp suitable for holding lead joints/leakages of 300 /250 mm bore of pipes any type made out of 40 mm x6 mm thick flat iron with M.S nuts bolts with flat washer 3mm thick -02 No for each, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 110.00 here-in-before but of size 200mm bore, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 110.00 here-in-before but of size 150mm bore, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 110.00 here-in-before but of size 100/80 mm bore, complete all as specified and directed by Engr-in-Charge.
Material & Labour for in replacement of steel nuts, bolts, washers of any size required at site, complete all as specified and directed by Engr-in-Charge.
Material and labour for fabrication, supply, fixing and commissioning signage boards for installations of size not less than 1.0M x 1.0M made out of ACP sheet of 3mm thickness with english alphabets and numerics cut out and designed out of 3mm thick acrylic sheet neatly pasted on the ACP board with MES logo ,framed and standed in stainless steel,both legs of height 1.5M above the ground level and embeded in pcc 1:4:8 (45 cm below GL)l with necessary fixing arrangement as per the site requirement, complete all as specified and directed by Engr-in-Charge. Note:- (a) Before fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at various locations.
Material and labour for fixing of Layout diagram of pipe lay out / flow chart/ shock treatment chart etc of size 1.5M x 1.0M for power houses, sub stations and other E/M installations as per the requirement at various locations made out of pre laminated board with digital printing, pasting side beadings of decorative aluminium channel with proper fixing arrangement etc, complete all as specified and directed by Engr-in-Charge. Note:- (a) Before for fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at the location including providing electrical connections complete as specified by Engr-in-Charge
M&L Chemical spray (DC 226 contact cleaner) in container of 415 ml/300g for precision blended multipurpose product for prevents corrosion penetrates, lubricants, displaces and seals out moisture release rusted mechanism etc, complete all as specified and directed by Engr-in-Charge.
Material and labour for spraying herbicide (Round up) on area to remove unwanted vegitation/grass at various locations, complete all as specified and directed by Engr-in-Charge.
Material and labour for shifting heavy items /using excavator / cleaning areas / cleaning site by providing crane/hydra/excavators/tractors/trolley ect as required at site, complete all as specified and directed by Engr-in-Charge.
Supply and fix indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x -400 Sqmm, complete all as specified and directed by Engr-in-Charge. Make 3MDenson/Reychem
Supply and fix indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 240-300 Sqmm, complete all as specified and directed by Engr-in-Charge. Make 3MDenson/Reychem
Supply and fixing indoor/outdoor end termination joint heat shrinkable 1100 Volts for XPLE cable of size 3.5 x 70-120 Sqmm, complete all as specified and directed by Engr-in-Charge.
Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 400 sqmm 3.5 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc, complete all as specified and directed by Engr-in-Charge. Note: (i) Earth work, sand, bricks , removing, returning filling Aluminium thimbles/lugs will be paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.
M&L in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core, complete all as specified and directed by Engr-in-Charge.
Material and labour for repair of valve pit chamber of any size not less than 1.2 mtr x1.2mtrx 900 mm necessary brick work, cement mortar / plastering in brick work,PCC ,welding work of hinges and MS sheet cover,painting on welding works ,MS sheets and plastered surface, complete all as specified and directed by Engr-in-Charge.
M&L for Repair & maint of Removing the MS scraper mechanism complete from clarifloculator tank compartment by opening nuts & bolts, cutting the welded parts and dismentling the parts (Approx weight 2500 Kgs) and refixing the same after required repairing including testing, complete all as specified and directed by Engr-in-Charge. Note:- (i) T&P required for lifting and lowering for clarifloculator tank compartment shall be provided by the contractor. (ii) Necessary safety precautions for workmen shall be the responsibility of the contractor. (iii) The cost of transportation to workshop and back is deemed to be included in the quoted rate. (iv) T&P required such as Hydra Crane shall be provided by the contractor and rate for the same be included in the quoted rates.
M& L Repair & maint of Removing rust/mud from scraper mechanism by scraping, scrubbing and making surfaces smooth for painting, painting with one coat of water proof paint (Anticorresive), complete all as specified and directed by Engr-in-Charge. Note:(i) The cost of transportation from site to workshop and workshop to site is deemed to be included in the quoted rate. (ii) Necessary safety precautions for workmen shall be the responsibility of the contractor. (iii) T&P required for lifting and lowering for clarifloculator tank compartment shall be provided by the contractor.
M & L for Replacement of MS scraping arms by dismantling old one and supply & fixing new blades made out of MS Sheet 3.15mm thick and size as per existing sample with SS but bolts and with rubber strip of neoprene rubber to clear the tapered floor of clarifier and fixing blade assembly with revolving arm, complete all as specified and directed by Engr-in-Charge. Note: (i) T&P required such as Hydra Crane shall be provided by the contractor and rate for the same be included in the quoted rates.
M & L for Repair/Replacement of CENTRAL BEARING ASSEMBLY complete with CI Housing, Shaft, bearing, grouting bolt, Current Collector Box etc.01 No, replacement of carbon brush assembly 01 No, replacement of MS chains 01 Nos, flocculator driving case -01Nos, clarifier driving drum -01 Nos,flocculator driving case -01 Nos .FLOCULATOR DRIVING ARRANGEMENT replacement of floculator/ reddle and shaft complete with Bearing Housing, Coupling, Bevel Gear, Motor, Gear Box, flexible coupling etc.r, CLARRIFIER END CARRIAGE DRIVE ASSEMBLY complete with idle shaft driving wheel, plummer bearing, chain sproket, motor, suitable gear box, Flexible Coupling etc., repair to reduction gear by replacement of gears, Gear shaft for end carriage type U-400 ratio 1:50, complete all as specified and directed by Engr-in-Charge. Note :- (i) T&P required for lifting and lowering for clarifloculator tank compartment shall be provided by the contractor. (ii) Necessary safety precautions for workmen shall be the responsibility of the contractor. (iii) The cost of transportation to workshop and back is deemed to be included in the quoted rate. (iv) T&P required such as Hydra Crane shall be provided by the contractor and rate for the same be included in the quoted rates. (v) Maintenance of 2 year AMC will be providede by contactor rate for the same be included in the quoted rates.
M & L for Dismentling of 3 phase electric motor coupled to reduction gears, taking out old UNSV/burnt winding were carefully including taking out old UNSV bearings, preparing the stator for rewinding with super enamelled copper wire of appropriate guage and thickness with allied insulating material, varnish, heat treatment of reqd, replacement of bearings , replacement of coupling with key and scrapping old paint preparation of surface and painting the motor with synthetic enamel paint of capacity upto 7.5 HP.including repair of gear box by replacement of bearings,chain sprokets gear assembly, lubricant oil, complete all as specified and directed by Engr-in-Charge. Note :- (i) Min. 9 month warranty of motor winding . (ii) The cost of transportation to workshop and back is deemed to be included in the quoted rate
Description all as per ser item No 130.00 here-in-before but for flash mixer system 02 nos of each flocculator, complete all as specified and directed by Engr-in-Charge.
M&L for Dismentling of old one and supply & fixing new reduction gear for flocculators sedimentation tank type V-400 ratio 1:60 make Radicon with replacement of V-belts, gear oil, repair to gears, gear shaft, repair to rail and wheel of the floculator, alignment, complete all as specified and directed by Engr-in-Charge. Note :- (i) T&P required for lifting and lowering for clarifloculator tank compartment shall be provided by the contractor. (ii) Necessary safety precautions for workmen shall be the responsibility of the contractor. (iii) The cost of transportation to workshop and back is deemed to be included in the quoted rate. (iv) T&P required such as Hydra Crane shall be provided by the contractor and rate for the same be included in the quoted rates. (v) Maintenance of 1 year AMC will be providede by contactor rate for the same be included in the quoted rates.
M& L for repair /replace ment to Alum mixing system 03 nos including dismantling of reduction gears having ratio 1:5 with replacement of agitator system, gear oil, re winding of burnt winding ,replacement of shaft with mixer ,provision dol staters and connection to the aagiator with suitable copper conductor cable through rigid PVC conduit,testing on completion, complete all as specified and directed by Engr-in-Charge. Note - The rate quoted by Contractor cost of all electrical/mechanical work/materials complete required to make the lime mixing system fully functional.
Supply, installation and commissioning and testing of LT panel cubical type CPRI Approved certified suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, floor mounted, outdoor type factory fabricated duly powder coated inside and out side, outer cover made out of 3.15mm thick CRCA sheet, internal cover and partition made out of 2 mm thick CRCA sheet with angle iron 50 mm x 50 mm x 6mm covered from all side with front and back openable, weather proof including suitable rating aluminium bus bar for 3 phase 4 wire system, wiring with suitable size copper cable and embeded in brickwork in CM 1:4 not less than 60cm above ground level with suitable foundation for fixing panel of required size in ground with nuts, bolts and washer etc. complete comprising of following including taking out the old unserviceable panel, complete all as specified and directed by Engr-in-Charge.
Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 35 sqmm 3.5 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc, complete all as specified and directed by Engr-in-Charge. Note: (i) Earth work, sand, bricks , removing, returning filling Aluminium thimbles/lugs will be paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.
M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 16 sqmm 3core through ERW MS conduit /Gi Pipes of suitable dia inculding taking down existing old unserviceable cable of complete all as directed by Engr -in-charge.
Description all as per ser item No 136.00 here-in-before but of size 6Sqmm, complete all as specified and directed by Engr-in-Charge.
Material & Labour for Fabrication of new panel outdoor type IP-65 suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, mounted in flocculator bar factory fabricated duly powder coated inside and out side, outer cover made out of 3.15mm thick CRCA sheet, internal cover and partition made out of 2 mm thick CRCA sheet ,wiring with suitable copper conductor cable, MCCB 100 A 01 Nos Incoming, and outgoing 03nos starter, of capacity 15 HP.with suitable relays and single phase preventer, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of cast iron non return valve, conforming to IS-5312, suitable for 250 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv, complete all as specified and directed by Engr-in-Charge.
Material & Labour for fabrication of new shaft with bearing bracket coupled to reduction gear with for flush mixing system, complete all as specified and directed by Engr-in-Charge.
Material & labur for 4sqmm 3 core submerssible copper conductor cable wiring through stell conduit, complete all as specified and directed by Engr-in-Charge.
Dismantling and taking down old u/s earthing complete with galvanised earth plate electrode 600mm x 600mmx 6.00mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 25x4 mm Gl strip earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 40mm bore medium grade and connected to main switch or main control board all as shown in electrical plate No.3 of SSR Part-l & including necessary excavation and earth work. The rate also include charcoal & salt in alternate layers, 20mm bore Gl pipe medium grade for watering and 40mm bore GI protection pipe (light grade), funnel, wire mesh, cast iron cover and frame etc, complete, all as specified or indicated and as directed including testing on completion, complete all as specified and directed by Engineer-in-charge.
S& in replacement of pop up sprinklers having radius throw 15-18 meters and flow minimum 1.2 LPS at an operative pressure 4-6 kg/ sqcm. The sprinkler shall be impact driven rotary with provision for adjusting at any degree of rotating having 01 inlet 20 mm pop up stoke, self flushing with pop up sheild made of virgin grade engineering, plastic body, sprinkler shall be non corrodible, heavy duty, complete all as specified and directed by Engr-in-Charge. Make : Rain Bird/ Getech/ GLIobe
DAVINDER SINGH (BID ID -3402322)
BARU ENTERPRISES (BID ID -3410281)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .