Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹46.1 LAccepted-AOC | L-1 | Accepted-AOC L-1 bidder being 7.13 percent less than deptt cost including 3 percent rebate | |
| 2 | L-2₹48.6 L+₹2.4 L (5.29%)Rejected-Finance 10 370 NEAR GEETA MANDIR GAS GODAM ROAD OBRA OBRA SONBHADRA UTTAR PRADESH 231219 INDIA | SONBHADRA | UTTAR PRADESH | 231219 | L-2 | Rejected-Finance rejected being L-2 bidder and 2.21 percent less than deptt cost | |
| 3 | L-3₹49.4 L+₹3.3 L (7.09%)Rejected-Finance | L-3 | Rejected-Finance rejected being L-3 bidder and 0.55 percent less than deptt cost | |
| 4 | L-4₹49.6 L+₹3.5 L (7.56%)Rejected-Finance VILLAGE UBHIA TEHSIL DIRBA DISTT SANGRUR 148030 | SANGRUR | PUNJAB | 148030 | L-4 | Rejected-Finance rejected being L-4 bidder and 0.10 percent less than deptt cost |
Tender Value
Refer Docs
EMD Value
₹99,500
Closing Date
2 Aug 2021, 5:00 pmClosed
SE Civil Works Circle PSTCL Patiala
Flat no. 10, Officer flat complex, PSTCL, Patiala
Construction of Civil works for 3rd Addl. 220/66 KV 160 MVA T/F at 220 KV S/S Bottianwala
2021_POWER_67802_1
CWC/T-02/2021-22
Open Tender
Civil Works
Item Wise
225 days
220 KV SS Bottianwala
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹99,500
Yes
11 Nov 2021
1 Jul 2021
4 Aug 2021
1 Jul 2021
2 Aug 2021
1 Jul 2021
Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres.
Earthfilling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming , watering and consolidating lead upto 30 metres.
Dismantling brick work tile, masonry or tile lining : In cement
Dismantling concrete : Lime concrete, cement concrete of 1:6:12 or leaner mix
Dismantling concrete : Cement concrete plain1:2:4 mix
Scraping: Bricks dismantled from brick work in lime or cement.
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
Cement Concrete 1:8:16 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)
Cement Concrete 1:6:12 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)
Cement Concrete 1:5:10 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)
Cement Concrete 1:2:4 with stone ballast or shingle (mixing by mechanical means using concrete mixer volumetric type)
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth .
Extra for vibrator used by the contractor at this own cost.
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth .
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
115mm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth .
Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
12.5 mm thick cement plaster 1:3
12.5 mm thick cement plaster 1:5
20 mm thick cement plaster 1:4 in two coat work
Applying priming coat with metal primer on new steel or iron work including preparation of surface + Painting two or more coats with aluminum paint to give an even shade excluding priming coat
Steel work fixed independently without connecting plates including cutting hoisting and fixing in position Flats
Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects. Above 20mm dia bars
Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
Welding by gas or by electric plant, including carriage to and from workshop etc.
Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications
Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above: From 0 to 15m
Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above: Exceeding 15m but upto 30m
Lowering of Electrodes
Cement Slurry of cement to sand ratio 1:6 with cement content not less than 150kg/100sqm
Supplying and spreading of crushed stone3/4" nominal size(20mm) in 3" (75mm) thick layer over PCC flooring in the switch yard area marked or as per directions of Engineer-in-Charge.
PCC Flooring 1:5:10 complete
Disposal of Surplus Earth/Debris
Providing and fixing MS Angle iron nosing made out of angle iron 50x50x6with hold fast for T/Plinth complete in all respects
Fixing of templates along with bolts as per drawing
Providing & Fixing base Plates Size 235x220x12mm for Transformer plinth
Supply & Fixing MS Cleats 65x65x6 mm - 19 mm for T/F Plinth
Providing and Fixing M.S Cable Racks of various sizes
Providing and fixing MS Angle iron nosing made out of 50x50x3 angle and flat 25x3 mm 600mm c/c wt 2.56 kg/mtr. complete in all respects
Providing & Fixing Rails
Supplying and Fixing of MS Angle posts of all shapes and sizes
P&F wire netting mesh of 12 gauge 50x50 mm mesh with 180 cm high fastened galvanized with 4 no MS Wire Rope 6/7 Strand 1/16'' dia each with all fittingscomplete in all respect
P&F of barbed wire fencing having dia 2/24 mm (4 rows) including allfittings such as hook bolts 3/8'' dia with check nut 10'' long with GI Clips of 14 SWGand 3/8''hex bolt with nut as per Drh Complete in all respect.
Supply , Hoisting & plaicng of ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 "and 9"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete - T3 - type (2'-2"x2"-2")
Supply , Hoisting & plaicng of ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 "and 9"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete - T4 - type (1'-9" x 2'-6")
Extra Carriage of materials & diff. of rates of material- Cement
Extra Carriage of materials & diff. of rates of material- Steel
Extra Carriage of materials & diff. of rates of material- Fine sand
Extra Carriage of materials & diff. of rates of material- Coarse Sand
Extra Carriage of materials & diff. of rates of material- Crusher
Extra Carriage of materials & diff. of rates of material- Stone metal 40mm
Extra Carriage of materials & diff. of rates of material- Bricks
Recovery Of Material- Bricks
Recovery Of Material- Steel Scrap
Recovery Of Material- Brick Bats
G.S.Construction Co.
PAUL AND COMPANY
Bs builders
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .