Repair and Renovation of Business School at New University Campus Jammu CIVIL AND SANITARY WORKS

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside university campus In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 Metres lead. of area beyond 3 sq. Metres

---------do------------ of area below 3 sq. Metres

Brick work using 2nd class common burnt clay building bricks in foundation, plinth and in super structure in cement mortar 1:6 (1cement: 6coarse sand) including cost of scaffolding, formwork etc. complete (All work upto floor V level).

Dismantling old plaster / tiles/ Chips already fixed on walls at site over which new tiles have to be fixed including racking out joints etc., disposal of dismantled material outside the University Campus.

Dismantling old Kota/ Floor Tiles already fixed on Floor at site over which new tiles have to be fixed including disposal of dismantled material outside the University Campus.

Providing and laying 40 mm thick cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded crushed stone aggregate 20 mm nominal size) under flooring including leveling, tamping and consolidation etc. complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood including applying a priming coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manuafacture (Make Asian/Nerolac)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :35 mm thick including ISI marked anodised aluminium butt hinges with necessary screws including applying a priming coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manuafacture (Make Asian/Nerolac)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 Kg/Sqm. (4 mm thick) glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. 35mm thick shutter Second class teak wood including applying a priming coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manuafacture (Make Asian/Nerolac)

Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws : 35mm thick shutter Second class teak wood including applying a priming coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manuafacture (Make Asian/Nerolac)

Providing & fixing glass panes 4mm thick, with putty & nails Glass panes weighing 10 Kg/Sqm

10-15mm thick cement plaster 1:4(1cement: 4 sand) in single coat on rough/fair side of single or half brick walls for interior/exterior plastering including making grooves wherever required. All work upto floor V level.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying white cement based Putty of average thickness 1mm of approved brand & manufacture on wall surface to give an even finish

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (one or more coat on old surface)

Applying one coat of cement primer of approved brand and manufacture on wall surface :Cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Painting (One or more coats) with synthetic enamel paint of approved brand and manufacture (Asian/ Nerolac) of required shade/colour to give an even shade on old work (Steel/wood/ Cemented Surface ).

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO, SOMANY KAJARIA make in all colours/shades as approved by the Engineer-in-charge, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed tiles of size 250x330mm conforming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, SOMANY KAJARIA make in all colours/shades as approved by the Engineer-in-charge, in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.

P/F aluminum door/window frames and shutters/partition (10 gauge) as per drawing, design and specification of anodized 50 micron powder coated nominal Alloy box-sections to opening/partitions including P&F fitting U-shaped shutter gaskets aluminum hinges/beading and lever brass mortice lock in case of Aluminum Doors and tower bolts, handles, Eye hooks, 5mm glass panes/12mm teak board laminated on both sides, hydraulic door machine where ever required complete job.

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete. 200 x10 mm

-----------do------------ 150 x 10 mm

----------do-------------- 100 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 300x16 mm

-----------do------------- 250x16 mm

Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. Hardwyn make (Eddy) or equivalent

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. Fixed to openings / wooden frames with rawl plugs etc. including applying a priming coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manuafacture (Make Asian/Nerolac)

Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS:1729. 100 mm dia

-----------do------------ 75 mm dia

Providing lead caulked joints to sand cast iron/ Centrifugally cast spun iron pipes and fittings of diameter. 100 mm dia

----------do------------- 75 mm dia

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm

Providing and fixing plain bend of required degree. 100 mm

Providing and fixing single equal plain junction of required degree. Sand cast iron S&S as per IS:1729. 100 x 10 0x 100 mm

Providing and fixing terminal guard: Sand cast iron S&S as per IS:1729. 100 mm dia

----------do----------- 75 mm dia

Providing and fixing collar: Sand cast iron S&S as per IS:1729. 100 mm dia

----------do----------- 75 mm dia

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Sand cast iron S&S as per IS:3989. 100 mm inlet and 100 mm outlet

----------do------------ 100 mm inlet and 75 mm outlet

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc. (internal work) Exposed on wall. 15 mm nominal bore

----------do------------ 20 mm nominal bore

----------do------------ 25 mm nominal bore

Making connection of G.I. distribution branch with G.I.main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete. 25 to 40 mm nominal bore

P&F of brass ball valve with handle complete of approved quality ISI Make 15 mm nominal bore

---------do------------ 20 mm nominal bore

--------do-------------- 25 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 15 mm nominal bore

---------do------------- 20 mm nominal bore

---------do-------------- 25 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, C.P Brass hinges and Rubber buffers, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231,C.I / M.S brackets, 32mm diameter flush pipe with fitting and clamps, over flow arrangements with specials & mosquito proof coupling of approved muncipal design complete including painting of fittings & brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid with white vitreous china flushing cistern & C.P. flush (Make Parryware/Hindware/Cera)

Providing and fixing wash basin with C.I./M.S. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous china Flat black Wash basin size 630x450 mm (Make Parryware/Hindware/Cera) with 15 mm C.P. brass pillar tap (Make Parko/Chilly/Jainco) Flat black Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

-------do--------- Flat black Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (Make Parryware/Hindware/Cera)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White (Make Parryware/Hindware/Cera)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 580x380x350mm / 430x260x350mm and 340x410x265mm sizes respectively (Make Parryware/Hindware/Cera)

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

P&F CP Prysmatic Urinal Spreader with CP Rod Jaquar Make

P&F CP Gration 100 mm nom dia

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931a) 15 mm nominal bore Jaquar Make

Providing and fixing C.P. brass Bib Cock of approved quality conforming to IS:8931a) 15 mm nominal bore Jaquar Make

P&F od CP Cup

P&F of CP Nipple 50 mm long & 15 mm nom dia

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes (Make Finolex/Supreme/Prince/Astral) 100 mm dia

------------do----------- 75 mm dia

Providing and fixing C.P towel rail including end brackets cost of wooden/PVC plugs with screw complete of size 600 x 20 mm (Jaquar Make)

Cleaning of manholes including cleaning of drain pipes from manhole to manhole for the making the lines fully functional & disposal of malba from the site as directed by the engineer incharge

Providing and fixing C.P soap dish of approved quality and make.

Supply of Labour for different works. Mazdoor

----------do------------ Carpenter Ist Class

Hire charges of welding set including the cost of welder & welding rods Complete

P/F of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore.

P& F white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware /Hind ware/Cera)

P/F solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/ Jindal/Cera)White colour

P& F CP jet with PVC pipe to be fixed with WC

Providing and fixing CP waste coupling for wash basins / Sinks 32/40 mm dia

Providing and fixing white vitreous china urinal partition of 755x165x365mm size of (Parry ware/ Hind ware/Cera) make and quality.

P/F of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm

Providing and fixing C.P Brass toilet paper holder of approved quality.

RAMAN KUMAR

RAJ KUMAR SALGOTRA

GOPAL SINGH