Repair/Renovation of Guest House in Sericulture Development Department Jammu

Amount

Demolishing cement concrete manually / by mechanical menas including disposal of material with in 50 mtr lead 1:3:6 or richer mix.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

12 mm cement plaster of mix.1:4 ( 1 cement : 4 fine sand) (Including all carriages and leads).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete. Size of tile 600x600 mm.(Including all carriages and leads).

Providing and laying Vitrified tiles in different sizes ( thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to I.S. 15622 of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3( 1 cement : 3 coarse sand) , including grouting the joint with white cement and matching pigments etc, complete. Size of tile 600x600 mm.(Including all carriages and leads).

Providing and fixing gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations ,of required size , approved shade, colour and texure laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement , mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.5 sqm)(Including all carriages and leads).

Providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturesr) of Ist quality conforming to IS: 15622 of approved make , laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc, complete. In all colours, shades, except white Ivory , Fume Red Brown. (Including all carriages and leads).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgendy , bottle green, black of any size as approved by Engineer -in-charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and joining with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Including all carriages and leads).

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level including curing in: cement motar 1:6 ( 1 cement:6 coarse sand) (Including all carriages and leads).

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm).

Wall painting with arcylic emulsion paint of apporved brand and manufacture to giv an even shade . Two or more coats on new work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick.

Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded , built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e, at top bottom and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminium sections shall be smooth rust free, straight , mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for galzing/ pancelling. C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge(glazing, panelling and dash fasteners to be paid for separately.

For fixed portion with polyester powder coated aluminium (menimum thickness of polyester powder coated 50 Microns)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately).Polyester powder coated aluminium ( minimum thickness of polyester powder coated 50 microns)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic items.) With float glass panes of 5.0 mm thickness ( weight not less than 12.50 kg/sqm)

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Taking out doors, windows and clerestory window shutters ( steel or wood) including stacking within 50 meters lead): of area of 3 sqm and below.

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, Windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. ( Note:- Butt hinges and necessary screws shall be paid separately) Second class deodar wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) panelling for panelled or panelled and glazed shitters 25 mm to 40 mm thick . 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medimum density Grade 1, IS: 3087 marked.

Providing and fixing 30 mm thick glazed shutters for doors, windows, and clerstory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws . Second class deodar wood.

Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows with ISI marked MS pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: Second class deodar wood.

Renewing glass panes, with putty and nails wherever necessary including raking out old putty.Float glass panes of thickness 4.0 mm (wight not less than 10kg/sqm)

Paintig with synthetic enamal paint of approved brand and manufacture to give an even shade. Two or more coats on news works.

Engagement of second class carpenters for minor repairs to old wood work.

Engagement of second class Plumbers for minor repairs to GI pipes.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (Including all carriages and leads).

Disposal of Mulba/ excavated earth by Mechancial Transport to an av. distance of 10 km including loading/uloading complete.

Providing and fixing GI pipes complete with GI fittings including cutting and making good the walls etc. 15 mm dia nominal bore (Medium)

Providing and fixing PTMT gratings of apprved quality and colour. Circular type 100 mm nominal dia.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long , 200 mm wide with a minimum distance of 37 mm from the wall face with concealed fitting arrangments of approved quality and colour, weighing not less than 88 gms.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia.

Providing and fixing upplasticized PVC connection pipe with brass unions 45 cm length and 15 mm nominal bore.

Providing and fixing white vireous china pedestal type water closer (European type W.C.pan) with seat and lid , 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conformings to IS:7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C.pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P brass pillar taps , 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White viterous china flat back wash basin size 450x300 mm with single 15mm CP brass pillar tap.

Providing and fixing white vireous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quantity conforming to IS: 8931

Providing and fixing 15 mm nominal bore C.P brass angle valve for basin mixer and gyser points of approved make conforming to I.S : 8931.

Wiring fot light point/fan point /exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit with modular type switch, modular plate suitable size GI Box and earthing the point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group-A.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel PVC conduit as required.

2x2.5 sq.mm+1x2.5 sq.mm earth wire

2x4 sq.mm+1x4 sq.mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A Switch.

15/16 A Switch

Supply ,Installation , Testing and Commissioning of 18 watt (4'-0") LED lights 18 watt of approved make as directed by Engineer-in-charge.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, tesitng and commissioning etc. as required. (Single pole ).

Pawan Kumar Gupta

M/s Satish Ganjoo

M/S MOHD ASHRAF SHAN

Sanjay Kumar Gupta

Amit Katyal

M/s Mir and Co