PROVISION OF APPROACH ROAD FOR EXISTING PARADE GROUND AND WIDENING OF ROADS AND GATE FOR GDOT BUILDING AT AFA HYDERABAD.

Amount

Excavation over areas , not exc 1.5 mtr deep and getting out in hard / dense soil complete all as specified and as directed.

Removal of excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soils complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for 150 mm thick Soling (or Sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

M&L for 15 cm thick granite , trap or basalt (compacted thickness) laid in two layers each layer 7.5 cm thick WBM , with carse aggregates of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size), spread, rolled and consolidated to required gradient and camber complete all as specified and as directed.

M&L for Preparation of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fannng the cleaned surfaces with gunny bags to remove all loose dirt etc. complete all as specified and as directed.

M&L for Apply paving bitumen evenly a priming / tack coat with bituminous primer at 10 kg per 10 Sqm complete all as specified and as directed.

M&L for Premix Bituminous Macadam (BM) using Paving bitumen of grade VG-30 with 4.0 % binder by weight of total mix using hot mix plant and laid by using mechanical sensor paver rolled and compacted to required camber and gradient using vibratory / pneumatic and tandem vibratory roller complete all as specified and as directed. (Note :- consolidated thickness 50 mm)

M&L for Bituminous Semi Dense Asphaltic Concrete (SDAC) 40 mm thick consolidated thickness with 5.5% of binder content (Viscosity Grade VG- 30 grade bitumen) by weight of total mix, laid with mechanical sensor paver rolled and compacted to required camber and gradeient using vibratory / pneumatic and tandem vibratory roller complete all as speciified and as directed .

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and including applying evenly a priming / tack coat with rapid setting bitumen emulsion with mechanical sprayer at the rate of 5 kg per 10 sqm complete all as speciified and as directed .

M&L for Bituminous Semi Dense Asphaltic Concrete (SDAC) 30 mm thick consolidated thickness with 5.5% binder content (Viscosity Grade VG - 30 grade bitumen) by weight of total mix, laid with mechanical paver rolled and compacted to required camber and gradeient using vibratory / pneumatic and tandem vibratory roller complete all as speciified and as directed .

M&L for Painting to lines, dashes, arrows, letters etc on road, pavement and the like not exc. 10 cm wide and 2.0 mm thick using hot thermoplastic road marking paint mixed with reflectorising glass beads @ 250 gm / Sqm for centre line and pedestrian crossing on finished road surface in moltan state using suitable mechanical sprayer complete all as specified and as directed.

S&F for ABS material roads studs of minimum size 100 mm x 90 mm x 20 mm model FS 7 Make : - Frontier or equivalent make of H2 Safety India Pvt Ltd/Sign and Media International / Alight Control system / Visiontech Safety Pvt Ltd / Texla Plastics and Metals Pvt Ltd / 3M complete all as specified and as directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions as in foundations pillars etc complete all as specified and as directed.

M&L for RCC (Design Mix) M-25 as in foundations, including raft, footing, foundation beam, plinth beam, bases for columns etc, basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC (Design Mix) M-25 as in columns, pillars,piers, posts and struts and mass concrete complete all as specified and as directed.

M&L for Providing, cement concrete type B1 mix 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5 mtr clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for Plain cement concrete Type D- 2 mix PCC 1:4:8 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth complete all as specified and as directed.

S&F Framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or grith, not otherwise described and applying two coat of syanthatic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of newly plasterd surfaces of any description and applying two coats of cement paint over walls complete all as specified and as directed.

B Sreepathy Rao & Sons

BEKKAM CONSTRUCTIONS

B RAMACHANDRAIAH AND SONS