Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹16.7 Laccepted-aoc | accepted-aoc |
Tender Value
₹19.7 L
EMD Value
₹50,000
Closing Date
2 Mar 2026, 9:30 pmClosed
Directorate of Municipal Administration
VIJAYAKUMAR R
Regarding construction of continuous work of khurubanshavali darga samuday bhavan at sadarsofa ward no71. hubli
DMA/2025-26/BD/WORK_INDENT54693
DMA/2025-26/BD/WORK_INDENT54693
Open
Buildings
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
8 documents required · 8 mandatory
₹500
₹50,000
2 Mar 2026
19 Feb 2026
28 Feb 2026
Regarding construction of continuous work of khurubanshavali darga samuday bhavan at sadarsofa ward no71. hubli
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and suchsimillar works in all kinds of soils, as per draw...
Providing and laying Polished Granite stone flooring in required designcomplete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cem...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Providing and laying in position Cement Concrete for all Super structures ofbuilding , Road works, Water works, Irrigation works & super structure worksof bridges upto 3.50 m height. The granite/trap/...
Addendum I-Percentage Additionalities for Formwork, RCC Columns Shaft (Slip Centering) 70%
Additionalities for Formwork, Centering & Scaffolding lintel beam and Roof beam and staircase Super structrue 60% percentage to be added to the finished rate of concrete
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay modular bricks of classdesignation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) including cost of all materials, labour, scaf...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smoo...
Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to opening...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade :Two coats on newwork over an under coat of suitable shade with ordinary paint of approve...
Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofen...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
government notification.pdf
Instructions to Tenderers • 1.75 MB
kw-1 54693.doc
Tender Document • 1.01 MB
format of bankers certifiate.pdf
Instructions to Tenderers • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .