Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹27.9 L+₹2.9 L (11.8%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹26.7 L+₹1.7 L (6.97%)Rejected-Finance 210 C RAM DASS KA HATA SADAR CANTT LUCKNOW UP PIN 226002 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226002 | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT, LUCKNOW
PERIODICAL SERVICES INCLUDING CERTAIN MISC B/R REPAIR IN TECH AREA AT AF STN BKT
2022_MES_530446_1
8632/BKT/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) BKT
₹50,000
Yes
1 Sept 2022
13 Jun 2022
21 Jul 2022
13 Jun 2022
19 Jul 2022
27 Jun 2022
60 days
Amount
M&L for preparation of old plastered surfaces of wall including cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds and efflorescent salt and trading and greasy spots and applying one coat of white wash using mech means and rollers only complete all as specified and directed including vegetation cleaning as required as per site complete all as specified and directed.
Ditto complete all as per item No-1 here in before but one coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old distempered surfaces of wall by washing rubbing down and stopping of old distempered surface of wall including cornices etc and also correction layer of wall putty as required for levelling and applying one coat of oil bound distemper (Oil emulsion any tint) using mech means and rollers only as directed on wall complete all as specified.
Ditto complete all as per item No-3 here in before but one coat of oil bound distempe on ceiling all as specified and directed.
M&L for preparation of old plastered surfaces of walls by washing, rubbing down and stopping of distemper and painted surfaces & applying two coats of distemper oil emulsion over a thin layer of wall care putty using mech means and rollers only complete all as specified and directed.
M&L for preparation of old painted surface of wood or wood based material of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enemel paint complete all as specified.
M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted plastered surfaces of wall of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old plastered or unplastered decorated surface of walls and applying one coat of cement base paint using mech means and rollers only at any height of any colour complete all as specified and directed including cleaning of vegetation on roof or side gable wall thrown in low line area with in MoD land upto 500 m lead etc complete all as specified and directed.
Ditto complete all as per item No-09 here in before but applying two coats of cement base paint, complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls of any description over 10cm width or girth and applying one coats of plastic emulsion paint, white or tinted using mech means and rollers onlycompleete all as specified and directed.
Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortar including all quions, arches, pillers etc but excluding ashlar facings dressed stone work and pre-cast concrete articles complete all as specified and directed.
Supply only Integral water proofing compound as specified and directed.
M&L for brick work with sub class 'B' brick (using old size bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for 15mm thcik rendering on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thcik rendering on other than fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper using mech means and rollers only complete all as specified and directed.
M&L for 15mm thick rendering in patches on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement area exceeding 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed.
Ditto complete all as per item No- 20 here in before but area n.exc 1.00 Sqm each complete all as specified and directed.
M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high with paint, complete all as specified and directed.
M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc with thick paint, complete all as specified and directed.
Hacking out old broken glass up to 9.50 m height (any thickness size, quality or description) from steel frames, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty upto 9.5m height in steel shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed.
All as per item No 25 above but 5.5mm thick glass complete all as specified and directed.
Dismantling of floor hearth and wall tiling incl mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .
M&L for vitrified ceramic tile 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick sceed bed in CM 1:4 complete all as specified and directed.
M&L for glazed ceramic coloured/printed tiles (colour & shade as approved by GE) of size 300 x 450mmx 7-8mm thick in verticle surfaces as in skirting and dado set and jointing neat cement slurry, over & including 10mm thick rendering in cement mortar (1:4) and pointed, in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L machine cut kota stone slab flooring 18-20mm thick over & including cement screed 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including including rubbing & polishing complete all as specified and directed.
M&L machine cut kota stone slab in verticle surfaces 18-20mm thick over & including cement screed in CM 15mm thick in CM 1:4 laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab including including rubbing & polishing complete all as specified and directed.
M&L aluminium door repair of any size as per existing including taking out glazed shutter from frames and refixing in the same opening after servicing/replacement of broken pivots, floor spring rubber band and locking arrangement etc making good to obtain smooth opening and closing & all adjustment to make the functional. Complete all as specified & directed. (Note :- Aluminium members shall measured & paid seperately under respective items)
Taking down chowkats with shutter (without taking off shutter from the frame) exc. 1.5 sqm & n. exc 4 sqm each complete all as specified and directed
S&F window glazing at the height of 12 to 14 Meters & the glass shall be free from distortion waterproof and with vapor proof seal with the thickness of outer toughened glass (tint as approved by GE/matching with existing window glazing) shall be 5mm thick with 1.52mm PVB lamination & 12mm air gap. The glass shall be heat strengthened (HS) and 5mm thick clean toughened glass (inside) properly sealed window glass shall be sealed with silcon sealant all around. The entrapped moist air between the glass pans shall be dehydrated by certified drying agents. The double glass shall with stand the sustained wind speed of 12mm miles per hour or more. The make of glass shall be SAINT GOBIAN/MODIGUARD SAFEX/ASAHI INDIA. Supply and fixing shall also include the followings :- (a) Loading charges (b) Transportation charges (c) Unloading charges (d) Un-Installation of existing defective glass (e) Installation Charges (f) Scaffolding charges for 12 to 14 m height of ATC tower (g) Making necessary frame work for packing (h) Adequate silcon quantity for sealing (j) Freight charges (k) Insurance aagainst any breakages of glass during transportation/installation and insurance charges for workmen engaged on the work.
S&F in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified or directed
M&L for 40 mm thick cement concrete 1:2:4 type B1 (20mm graded aggregate) as in flooring finished surface even and smooth without using extra cement complete all as specified. (Make- Saint Gobian/Modi Guard/ Asahi India)
S&F in repair 6mm thick toughened glass fixed with aluminium frame/steel frame/UPVC frame with rubber beads & fixtures complete all as specified and directed. (Make- Saint Gobian/Modi Guard/ Asahi India)
S&F in repair anodised aluminium sanp grid flase ceiling with hot dipped pre-coated sections & 12mm thick Gypsum board panels of grid size 600mm x 600mm . Make - India Gypsum, Armstrong with following aluminium sections for frame work :- (a) Wall side angle 24 x 24 x 0.43mm (b) Main tee 24 x 35 x 0.35 mm (c ) Cross tee 24 x 25 x 0.30mm having integral splices at both ends for intelocking complete with suitable hanging arrangements with haanger of 6mm dia GI (upto 1200mm length), holding cleats made out of GI flat iron 40 x 3mm size 60mm long, expansion hold fastners 12.50mm dia 40mm long etc and providing two coats of deiptemper oil emulsion over a coat of primer complete all as specified and directed.
All as per item No 39 above but 4mm thick E-board design decorated ceiling complete all as specified and directed.
Supply and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 42 x 50 mm (tolerance + 1mm) with wall thickness 2.00mm ( + 0.2mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical the frames re-inforced by galvanised MS tube size 19 x19 mm and 1 mm ( + 0.10mm ) wall thickness and 3 Nos. Stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engr-in-charge.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with maltii chamber, frame 60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2 + 0.2mm thick galvanised steel Frame (28 mm x 21.5 mm), sash (31mm x 27mm), T profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware (Casement door handle made of zinc alloyed ( white powder coated) corner striker. Secondary strikers, cylider, door tranmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with slelected qulaity glass. (Note :- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose).
S&F 5mm thick toughned glass fixed to uPVC door complete all as specified and direccted.
Desmantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.
S/&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in curved/slopy roof surface at any height including plain sheet all as specified
M&L for preparation of old painted surface of wall and applying one coat of weather proof paint (camouflage pattern) complete using mech means & roller all as specified and directed.
M&L for preparation of old painted steel surface in camouflage pattern in three or more colour on roof top incl necessary safty items for labour of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
PANKAJ AND BROTHERS
M/S PRATAP BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .