REPAIR / MAINT OF DG SETS STREET LIGHTS / SECURITY LIGHTS, SEWAGE TREATMENT PLANT MACHINERY AND CERTAIN ALLIED E/M WORK AT CHH SAMBHAJINAGAR MIL STATION UNDER GE (SOUTH) AHILYANAGAR

Amount

S&F in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including PVC copper wire 1.5 sqmm of suitable length for connection of street light from Overhead conductor /junction box complete all as specified and directed by Engr in Charge. Make : Havells Cat No ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent of makes specified.

All as per item No 1 above but for 70 Watt 230 V AC street light . Make : Havells Cat No ENDURACITYLINERNEOSL70WLED757PASYBOTG or equivalent of makes specified.

All as per item No 1 above but for 90 Watt 230 V AC street light . Make : Havells Cat No ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO or equivalent of makes specified.

All as per item No 1 above but for 120 Watt 230 V AC street light . Make : Havells Cat No ENDURAPEARLMAGSL120WLED757PASYTOTGASTHOO or equivalent of makes specified.

S&F in replacement LED flood light fitting 70 Watts, having pressure die cast housing with IP 65 efficient high outout emitter LED for better distribution, protection with heat resistant toughned glass with individual LED lenses complete including making connection with flood light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5 sq mm including MS clamps nuts, bolts and washers of required size complete all as specified and directed by Engr in Charge. Make : Havells Cat No. JETA PROFL70WLED757LT G or equivalent of makes specified.

All as per item No 5 above but for 100 Watts 230 V AC LED flood light fitting Make : Havells Cat No. JETAIRISFLS 100WLED757APWBLT G or equivalent of makes specified.

All as per item No 5 above but for 120 Watts 230 V AC LED flood light fitting Make : Havells Cat No. JETAIRISFLS 120WLED757APWBLT G or equivalent of makes specified.

Taking down old unserviceable street light fittings from street light poles of any type/gun shed for repairs and refixing including testing the same in existing position after repair complete all as directed. Note- Parts/Items as required for repairs and replacement shall be measured and paid for separately under respective items .

S&F in replacement Driver for LED Street Light 20 Watt to 50 Watt complete all as specified and directed . Make : Havells/Crompton Greaves/Bajaj.

S&F in replacement Driver for LED Street Light 50 Watt to 160 Watt complete all as specified and directed. Make : Havells/Crompton Greaves/Bajaj.

S&F 1100 volts grade heavy duty multi stranded Aluminium Solid conductor cable PVC insulated served with inner sheathing of PVC tape and overall PVC sheathed in service connection flate/circular cable of sizes 4 Sqmm 2 core laid and jointed in position including taking out existing service cable all as specified and directed by Engr in charge.

All as per item No 11 but 6 Sqmm 2.0 Core, PVC Cable

S&F in replacement, bracket for street light, made out of GI pipe, medium grade of suitable size (40 mm dia and 1.2 mtr long), bent to shape, fixed with and including necessary heavy duty clamps of suitable size including painting the clamps with two coats of synthetic enamel paint over a coat of primer all as specified and as directed.

S&F in replacement, LED security light for buildings with single piece new generation energy saving and environmental friendly long life LED, 35 W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 and all acessories including one bracket made of light grade GI Pipe 32 mm dia, 1.5 mtr long fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connected to nearest electric supply with and including three core 1.5 sqmm aluminium conductor cable of suitable length complete all as specified and as directed. Make : Havells Cat Part No ENDURASUNDOWNSL35WLED765PASYBOPC or equivalent of makes specified.

Supply and fix in replacement post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including suitable size of GI Pipe as per lamp size including connection and testing complete all as specified and directed . Make : Havells cat No CORALPT25WLED757PSYMTOPC or equivalent of makes specified.

Supply and fix in replacement garden light of Bamboo type -IP 65 of capacity 9/8 watt LED 6000K New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source with PCC Base of size 1 feet x 1 feet for fixing of lights with proper nut & bolts including elect connection wire complete all as specified and directed . Make : Havells Cat No. BAMBOOBLS8WLED830PSYMTOPC or equivalent of makes specified.

S&F in replacement FRP Junction box, light weight low corrosive suitable for pole mounting including MCB SP6/10 amps , Box size not less than 250x200x100 mm including necessary connection for loop in and loop out cable connector and suitable size for cable glands complete all as specified and directed by Engr in Charge.

S&F in replacement, Analog street light timer switch, 3P Module , 24 hours programe , programmable every 15 min , backup of 100 hrs , current capacity 16 A with (with battery back up) electronic type with digital display suitable for Indian region longitude/latitude including suitable size of contactor with 1 changeover complete with all accessories and prewired suitable for a panel / pole mouting box complete all as specified and as directed.

Supply, laying and testing in replacement 50 Sqmm 3.5 Core, XLPE insulated, PVC sheathed, conforming to relevant IS, ISI marked, earthed system, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, in trenches/wall/floor/pole complete and making connection including suitable size Aluminium lugs, including taking out existing cable and cable covers all as specified and directed by Engineer-in-charge .

All as per item No 19 but 35 Sqmm 3.5 Core, XLPE Cable

All as per item No 19 but 25 Sqmm 3.5 Core, XLPE Cable

All as per item No 19 but 10 Sqmm 4.0 Core, XLPE Cable

All as per item No 19 but 10 Sqmm 2.0 Core, XLPE Cable

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundations/laying of cables etc and getting out in soft/loose/hard dense soil complete all as specified and directed by Engr in Charge.

Returning, filling in, including spreading, levelling, watering and well ramming of soil in layers not exceeding 25 cm thick complete all as specified and directed by Engr in Charge.

Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr in Charge.

M & L for Double Walled Corrugated DWC HDPE Pipe (N-450) of outer dia 63 mm including 90 degree bends with coupler and rubber ring laid in trenches of size 63 mm suitable for cable protection complete all as specified and directed.

S&F in replacement galvanised, 50 mm bore , steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe complete all as specified and directed by engr in Charge.

Taking down High mast light of any length for repairs or carried out general maintenance including greasing, oiling to electric motor/steel wire rope etc and replacement / tightining of nuts & bolts , including all other repair as per site requirement etc including refixing in its original position and testing on completion complete all as specified & directed. Note : Greasing/Oiling/Nut bolts & all other minor parts shall deemed to be included in the unit rate quoted against the item.

Disconnecting electric connection, taking out and transporting to workshop old unserviceable motor from High Mast light of capacity 2/3 HP for repair/replacement, opening up the motor and rewinding with suitable gauge of super enamelled copper wire of 'F' class insulation , warnishing heating & replacement of worn out parts such as motor bearings, fan blade, reassembling after painting by preparing the surface, scrapping the old painting and removing the grease, oil, dirt etc, filling the cavities, spray painting with two coats of super enameled anti corrosive paint of approved colour, over a coat of primer transporting the repaired motor back to the original location, reinstalling, testing & commissioning complete all as specified & directed by Engr in Charge. Note :- Any nut/bolts/ studs and packing required shall deemed to be included in the rates quoted by the contractor.

S&F Winch Handle of suitable dia & Size for opearating High Mast light up & down complete all as specified & directed.

S&F in replacement of steel wire rope of 6 mm dia 7/19 gauge including greasing ,oiling tightining of nuts & bolts etc for High mast light of any length complete all as specified and directed by Engr in Charge.

M&L for cleaning vegetation/grass and bushes with roots in the STP installation area, removing the garbage and deposited at distance not exceeding 100m as directed .

M&L for filter media plastic round pieces used in fabrication tank to settle down bacteria in it complete all as specified and as directed.

Cleaning, checking and servicing of Aerobic tank open well of size 5 mtr dia and 12 mtr depth, disposal of wastage away from STP area and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of collection sump of size 5 mtr dia and 12 mtr depth, disposal of wastage away from STP area and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of equilization tank of size 13 mtr dia and 3 mtr height, disposal of wastage away from STP area and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of chamber and Fab - I tank of size 5 mtr dia and 6 mtr height, disposal of wastage away from STP area and outgoing pipe net and to stop flow of filter media from fabrication tank to tube settler tank complete all as specified and as directed.

Cleaning, checking and servicing of chamber and Fab - II tank of size 5 mtr dia and 6 mtr height, disposal of wastage away from STP area and outgoing pipe net and to stop flow of filter media from fabrication tank to tube settler tank complete all as specified and as directed.

Cleaning, checking and servicing of sludge tank of size 2mtr x 2mtr x 5mtr depth, disposal of wastage away from STP area and outgoing pipe net and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of sludge sump, tube settler tank and resetelling the tube setter tank of size 6.5mtr dia and 5 mtr height, disposal of wastage away from STP area and outgoing pipe net and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of Primary, secondary & Filter tank of size 10mtr x 6mtr x 3mtr height, disposal of wastage away from STP area and outgoing pipe net and necessary connected works for proper working system complete all as specified and as directed.

M&L for Scrapping the old painting and removing the grease, oil, dirt etc, filling the cavities of exposed surfaces of pump, motor,sand filter,ladder, gate and pipe line and spray painting with two coats of super enameled anti corrosive paint of approved colour (according to colour code at STP area ), over a coat of primer after taking proper shutdown of LT pannel and restoring of supply after completion of the work all as specified and as directed.

Thorough checking and servicing of pressure sand filter and pressure activated carbon filter complete all as specified and as directed.

S&F in repairs, PVC flexible hose pipe 100 mm bore complete all as specified and as directed.

M&L for removal of blockage and leakage of pipe line, checking and servicing from sludge sump to sludge tank to centrifugal pump set, taking down and refixing of pipe line after clearing the blockage of pipe line in STP area and necessary connected works for proper working system all as specified and as directed.

Taking out old unserviceable submersible sewage pump set of capacity 40 HP from sewage underground sump by means of chain pully and transporting to authorised workshop for repair and rewinding the motor with super enamelled insulated copper wire of existing gauge including insulated packing, liquid compound, differential oil-4.5 ltrs, repalcement of oil seal and motor/pump bearing, replacement/repair of motor and pump shaft made out of high quality Stainless steel and reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running for upto 40HP, 3 phase electric motor all as specified & as directed.

Disconnect the electric supply, dismantling coupling and remove compressor upto 40 HP, shifting to local workshop for repair / servicing, opening up the compressor unit, dismantle and remove damaged twin lobo air compressor, piston, piston connecting rod, rings etc and replace with new one, reconditioning / welding / filling / grinding / lathework to shaft of the compressor unit, supply & replace suitable size bearing of make : SKF - 2Nos, drain out the out dated compressor oil, cleaning the oil chamber thoroughly by removing the sludges from the oil sump, replace with new compressor oil of specified gravity - 4 Litres, supply & replace air filters of suitable size - 2Nos, reassembling with new gasket set, transporting back to the original location, coupling, aligning, supply and replace worn out V - belts ( B-72) of make : Fenner - 3Nos, and reinstalling at sie, connecting, testing & commissioning complete all as specified & as directed.

Taking LT shutdown, dismantling and removing the 10 HP, 3 phase electric motor from existing foundation / position, shifting to authorized workshop for repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enamelled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing the bearings, reassembling the motor, transporting to site of work and reinstalling back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running complete all as specified & as directed.

Taking LT shutdown, dismantling and removing the upto 5/5.5 HP, 3 phase electric motor from existing foundation / position, shifting to authorized workshop for repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enamelled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing the bearings, reassembling the motor, transporting to site of work and reinstalling back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running complete all as specified & as directed.

M& L for repair/servicing of pressure pump any type and capacity including replacement of unserviceable parts complete all as specified and as directed.

Take Water Sample (Raw Water And Treated Water) form existing STP 1.2 MLD, sample will be submit in govt lab " Maharashtra State Public Health Services. State Public Health Laboratory, Pune " & Produce test report every 3 month as per STP parameter.

M&L for Checking, Inspection, maintanance and servicing of 100 KVA DG Set complete including replacement of unserviceable spare parts of the DG set (comprising of Engine/ Alternator/ Control panel) of the following capacity for smoth functioning complete all as per manufacturers instructions and all as directed by Engr in Charge. A. (a) Checking of lubricating oil condition (b) Checking engine for oil, water leakage and correcting the same (c) Checking of all the nut bolts of engine and alternator (d) Checking of all belts and adjust the tension properly (e) Cleaning of air filters (f) Checking and readjusting the valve clearance (g) Change of Oil/Fuel filters and engine oil if necessary (h) Checking of starter motor battery and charger (i) Checking of cooling system and fuel system (j) checking of all power cables and AVR connections and mounting bolt tightnees of alternator (k) checking the function of AVR genaral checks (l) Checking of control panel meters and gadgets functiong (m) Checking of all control and safety wirings B. (a) Checking of flexible coupling of engine and alternator (b) Cleaning of crank case ventilation pipe (c) Checking of injectors and fuel pump (d) Checking of alternator and carbon brushes of following capacity DG sets NOTE (1) Cost of Spare parts required will be paid and measured separately (2) Servicing/routine check up carried out through authorised service centre of manufacturer (3) Make of spare recommendation by auth service centre of manufacturer. 100 KVA DG Sets

All as per serial Item No 54 but for 40/30 KVA DG Set

All as per serial Item No 54 but for 15 KVA DG Set

S&F in repairs of Oil Filter Element with 'O' ring washer for 100 KVA DG Set as per sample complete all as specified and directed .

All as per serial item No 57 but for 40/30 KVA DG Set

All as per serial item No 57 but for 15 KVA DG Set

S&F in repairs of Fuel filter Element (Primary & Secondary) as per sample for 100 KVA DG Set complete all as specified and as directed .

All as per serial Item No 60 but for 40/30 KVA DG Set

All as per serial Item No 60 but for 15 KVA DG Set

S&F in repairs of Air Cleaner Assembly (inner & outer) as per sample suitable for 100 KVA DG Set complete all as specified and directed

All as per serial Item No 63 but for 40/30 KVA DG Set

All as per serial Item No 63 but for 15 KVA DG Set

S&F in replacement of fuel pipe with banjo bolt at both side suitable for 100 KVA DG sets complete all as specified and directed.

All as per serial Item No 66 but for 40/30 KVA DG Set

All as per serial Item No 66 but for 15 KVA DG Set

S&F in replacement of 'V' belt for radiator/water pump as per sample suitable for 100 KVA DG Sets complete all as specified and directed.

All as per serial Item No 69 but for 40/30 KVA DG Set

All as per serial Item No 69 but for 15 KVA DG Set

S&F in repairs of Dynamo as per sample of 100 KVA DG Sets complete all as specified and directed .

All as per serial Item No 72 but for 40/30 KVA DG Set

M&L for changing /toping up of best quality of engine oil 20W40/10W30 type for various type/capacity DG sets including removing of old burnt engine oil from DG Sets complete all as specified and directed

S&F in replacement of water pump assembly for 100 KVA DG sets complete all as specified and directed.

All as per serial Item No 75 but for 40/30 KVA DG Set

S&F in replacement of self starter for 100 KVA DG Set complete all as specified and directed.

All as per serial Item No 77 but for 40/30 KVA DG Set

Supply and filling distilled water in batteries of DG sets complete all as specified and directed.

S&F in replacement of auotmatic voltage regulator (AVR) 24 volt suitable for 100 KVA DG Sets complete all as specified and directed.

All as per serial Item No 80 but for 40/30 KVA DG Set.

All as per serial Item No 80 but for 15 KVA DG Set.

S&F in replacement of lub oil pump suitable for 100 KVA DG Sets complete all as specified and directed.

All as per serial Item No 83 but for 40/30 KVA DG Set

All as per serial Item No 83 but for 15 KVA DG Set

S&F in replacement of Air Hose set with all necessary fittings for 100 KVA DG Sets as per sample complete all as specified and directed.

All as per serial Item No 86 but for 40/30 KVA DG Set

All as per serial Item No 86 but for 15 KVA DG Set

S&F in replacement of Water Hose pipe set with all necessary fittings for 100 KVA DG Sets as per sample complete all as specified and directed.

All as per serial Item No 89 but for 40/30 KVA DG Set

All as per serial Item No 89 but for 15 KVA DG Set

M & L for taking out burnt winding of exciter of 100 KVA DG Sets including re-winding copper wire of super quality, of existing size, No of turns, varnishing, heating complete including testing on full load to entire satisfaction of Engr in Charge.

All as per serial Item No 92 but for 40/30 KVA DG Set

All as per serial Item No 92 but for 15 KVA DG Set

M&L for cleaning of radiator for 100 KVA DG sets by using Keroscene oil and radiator cleaning solution (Ready to Wash) by pressure of pump and brush including necessary welding/brazing work to the leakage if reqd complete all as specified and directed.

All as per serial Item No 95 but for 40/30 KVA DG Set

All as per serial Item No 95 but for 15 KVA DG Set

M&L for complete wiring to LT panel of DG Set of any capacity with all connected items and replacement of voltmeter, ammeter,RPM & HRS meter with digital display,oil pressure gauge, oil temperature gauge, solenoid switch, LED type indicator lamp set of three including CT PT for 3 phase amperemeter upto capacity of 60 Amp including taking down old wiring and voltmeter, ammeter,RPM & HRS meter with digital display,oil pressure gauge, oil temperature gauge, solenoid switch, LED type indicator lamp set of three complete all as specified and directed.

S&F in replacement of oil pressure gauge DG set of cap up to 100 KVA complete all as directed by Engr in Charge.

S&F in replacement of thermostate valve suitable for 100 KVA DG Sets complete all as specified and directed.

All as per serial Item No 100 but for 40/30 KVA DG Set

All as per serial Item No 100 but for 15 KVA DG Set

S&F in replacement of Oil seal front and rear suitable side for 100 KVA DG Sets complete all as specified and directed .

All as per serial Item No 103 but for 40/30 KVA DG Set

All as per serial Item No 103 but for 15 KVA DG Set

Supply and fix in replacement of battery terminal for DG Sets complete all as specified and directed .

Supplying and laying 2m x 1m size , Synthetic rubber insulated mats 2.50 mm thick for voltage up to 11 KV for electrical purpose as per IS 15652-2006, (Superseding IS-5424) suitable for electrical shock safety complete all as specified and directed .

M&L for Calibration of FIP including supply & fix in replacement plunger, DV, governor wet O-Ring, Pin roll, barrel, Pin ball bearing spring, washer and testing for 100 KVA DG Set complete all as specified and directed.

M & L in replacement of exhaust silencer of 100 KVA DG set complete all as specified and directed.

All as per serial Item No 109 but for 40/30 KVA DG Set

Supply and filling of best quality Coolant liquid for DG Set of various capacity and locations complete all as specified and directed.

S&F in replacement, radiator cap for 100 KVA DG Sets all as specified and as directed.

S&F in replacement, radiator cap for 40/30 KVA all as specified and as directed.

S&F in replacement, outer glass and gasket as required at site for 100 KVA all as specified and as directed.

S&F in replacement, solenoid switch for 100 KVA DG sets all as specified and as directed.

S&F in replacement, solenoid switch for 40/30 KVA DG sets all as specified and as directed.

S&F in replacement, solenoid switch for 15 KVA DG sets all as specified and as directed.

M&L for draining out all fuel from the fuel tank of 100 KVA DG Sets and keeping it in a separate container, cleaning the fuel tank all lnternally & externally by removing all the accumulated sediments, leak testing the tank and welding/brazing including one coat of black synthetic enamel paint over a coat of red oxide primer and refixing the tank to its original position & refilling the fuel back into the tank complete all as specified and directed.

All as per serial Item No 118 but for 40/30 KVA DG Set

All as per serial Item No 118 but for 15 KVA DG Set

M&L for Prepration of Old Surface of DG Sets, preparing the surface by rubbing with fine emery paper and making the surface smooth and re-painting with two coats of super quality synthetic enamel paint by spray gun fully matched with its original colour and making good entire DG Set ( Engine, Alternator, foundation ,Diesel Tank and Radiator unit including canopy) and including marking SM/MES No on DG Sets with diffrent paint maintaning colour code to the 100 KVA DG Sets complete all as specified and directed.

All as per serial Item No 121 but for 40/30 KVA DG Set

M&L for denting, welding/fixing of hinges, replacement of damaged door (made up of 3.15mm thick steel sheet) of indoor/outdoor panel door of various capacity, preparation of old/new surfaces of panel box and applying two coats of synthetic enamel paint all as specified and as directed.

S&F in replacement of Off Load Change over switch 415 Volt in sheet metal inclosure 4 Pole of capacity 63 Amps with connecting acessories complete all as specified and directed .

S&F in replacement of Off Load Change over switch 415 Volt in sheet metal inclosure 4 Pole of capacity 125 Amps with connecting acessories complete all as specified and directed .

S&F in replacement Battery 12 Volt 180 AH (Maint free heavy duty with initial charging complete all as specified and as directed . Make : Exide /Amco/Nicco/ Amaron

S&F in replacement Display Board (double sided) of Size 1.0m x1.0m x 0.30m made with flax material mounted on suitable iron frame & printing of Installation detail both side of the board ,Printing detail/ installation detail provided by JE/AGE including fixation of 2x20 Watt LED light inside the board and also arrangement connection wire from the nearest LT panel/pole complete all as specified and directed .

S&F in replacement , MCCB 4 Pole , 63 Amps , 16 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed by Engr in Charge.

S&F in replacement, MCCB 4 Pole , 125 Amps , 16 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed by Engr in Charge.

S&F in replacement , MCCB 4 Pole , 160 Amps , 36 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed by Engr in Charge.

S&F in replacement , MCCB 4 Pole , 200 Amps , 36 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed by Engr in Charge.

S&F in replacement MCB C Curve TPN 40-100 Amps, 415 V complete all as specified and as directed.

M & L for cutting the existing road/hard standing surfaces to a depth of 60cm and 50cm width and getting out for laying under ground cable including returning filling in, watering well ramming in layers not exceeding 25cm in soil and filling the top 15 cm thick with PCC type B2 1:2;4 (using 20mm graded stone aggregate) all as directed by Engr-in -charge.

M/s. Gurudatt Electricals And Engineers, Aurangabad (BID ID -3509060)

SONU ENTERPRISES (BID ID -3508425)

D V Engineers and Contractors Pvt Ltd (BID ID -3513043)

M/s S.R lahoti (BID ID -3510120)