Operation and Maintenance for WSS to the Chennai Petroleum corporation limited CPCL in Nagapattinam District

Pumping Main - Materials

Operation and Maintenance of the Electro- Mechanical installations, equipments, components, pipelines valves and appurtenances, water retaining structures including protecton of all scheme components from damages/ theft undertaking legal actions for such untoward incidents, preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earmarked quantity of water to the beneficiaries as per Annexure -I, carrying out the O&M as per standard operating procedures, Acts and rules in force and as directed by TWAD Board Oficers and excluding cost towards attending leak, burst repair and replacement works to electro mechanical installations consumables for disinfection of water, cleaning of all water retaining structure, electricity . etc should be engaged at appropriate place as directed by the TWAD Board officer.

REPAIRS AND RENEWALS

Attending Leaks in the pipelines of this CWSS for the following items, as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges, etc complete within the stipulated time limit as specified in Clause 2.6.4 of General conditions of Contract - Part II.

160mm 4ksc K7 PVC Pipes

250mm 4ksc K7 PVC Pipes

250mm CI Pipes

250mm DI Pipes

Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges, within the stipulated time limit etc., complete

5 HP(Submersible pumpset )

Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings

Transporting the pumpset from Pump House to work shop.

Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.

Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,

Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material

Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.

Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.

20 HP(Submersible pumpset )

Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings

Transporting the pumpset from Pump House to work shop.

Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.

Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,

Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material

Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.

Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.

For the year 2027 - 2028 (For the Period from 01.04.2027 to 31.03.2028)

Pumping Main - Materials

Operation and Maintenance of the Electro- Mechanical installations, equipments, components, pipelines valves and appurtenances, water retaining structures including protecton of all scheme components from damages/ theft undertaking legal actions for such untoward incidents, preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earmarked quantity of water to the beneficiaries as per Annexure -I, carrying out the O&M as per standard operating procedures, Acts and rules in force and as directed by TWAD Board Oficers and excluding cost towards attending leak, burst repair and replacement works to electro mechanical installations consumables for disinfection of water, cleaning of all water retaining structure, electricity . etc should be engaged at appropriate place as directed by the TWAD Board officer.

REPAIRS AND RENEWALS

Attending Leaks in the pipelines of this CWSS for the following items, as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges, etc complete within the stipulated time limit as specified in Clause 2.6.4 of General conditions of Contract - Part II.

160mm 4ksc K7 PVC Pipes

250mm 4ksc K7 PVC Pipes

250mm CI Pipes

250mm DI Pipes

Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges, within the stipulated time limit etc., complete

5 HP(Submersible pumpset )

Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings

Transporting the pumpset from Pump House to work shop.

Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.

Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,

Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material

Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.

Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.

20 HP(Submersible pumpset )

Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings

Transporting the pumpset from Pump House to work shop.

Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.

Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,

Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material

Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.

Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.

For the year 2028 - 2029 (For the Period from 01.04.2028 to 31.03.2029)

PUmping Main - Materials

Operation and Maintenance of the Electro- Mechanical installations, equipments, components, pipelines valves and appurtenances, water retaining structures including protecton of all scheme components from damages/ theft undertaking legal actions for such untoward incidents, preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earmarked quantity of water to the beneficiaries as per Annexure -I, carrying out the O&M as per standard operating procedures, Acts and rules in force and as directed by TWAD Board Oficers and excluding cost towards attending leak, burst repair and replacement works to electro mechanical installations consumables for disinfection of water, cleaning of all water retaining structure, electricity . etc should be engaged at appropriate place as directed by the TWAD Board officer.

REPAIRS AND RENEWALS

Attending Leaks in the pipelines of this CWSS for the following items, as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges, etc complete within the stipulated time limit as specified in Clause 2.6.4 of General conditions of Contract - Part II.

160mm 4ksc K7 PVC Pipes

250mm 4ksc K7 PVC Pipes

250mm CI Pipes

250mm DI Pipes

Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges,within the stipulated time limit etc., complete

5 HP(Submersible pumpset )

Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings

Transporting the pumpset from Pump House to work shop.

Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.

Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,

Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material

Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.

Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.

20 HP(Submersible pumpset )

Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings

Transporting the pumpset from Pump House to work shop.

Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.

Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,

Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material

Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.

Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.

Add GST @ 18 % on Basic Value