REPAIR REPLACEMENT RECLOTHING RECANNING OF ALL TYPES OF WOODEN STEEL FURNITURE CHAIRS HARD BEDS SOFA SETS AND POLISHING PAINTING OF ALL TYPES OF FURNITURES AT MD AND OTM ACCN OF VARIOUS UNIT AND BSO FURNITURE YARD UNDER GE NW KUNJALI COLABA MUMBAI

Amount

Chair Writing DRG NO FD-250, 280

Removing of unsv/broken rear leg and providing/fixing new leg made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins & duly french polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken front leg and providing/fixing new leg made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins & duly french polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken back rest and providing/ fixing new back rest made out of 1st class hardwood teakwood duly French polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken stiffener and providing/fixing new stiffener made out of 1st class hardwood teakwood duly french polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken front/rear rail and providing/fixing new front/rear rail made out of 1st class hardwood teakwood including drilling of Cane holes duly french polishing chair writing completely all as shown on drg and all as specified.

Removing of unsv/broken side rail and providing/fixing new side rail made out of 1st class hardwood teakwood including drilling of Cane holes and duly french polishing chair writing completely all as shown on drg and all as specified.

Removing of unsv/broken arms rest and providing/fixing new arm rest duly shaped & made out of 1st class hardwood teakwood and duly french polishing chair writing completely all as shown on drg and as specified.

M&L for French polishing to the repaired chair writing in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

M&L for Recaning of repaired chair writing with best quality of approved plastic cane of white or cream/ivory all as specified on drawing or as directed by Engineer-in-charge.

Chair dining DRG NO FD-228,279

Removing of unsv / broken rear legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polishing chair dining completely all as shown on drg and as specified.

Removing of unsv / broken front legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polishing chair dining completely all as shown on drg and as specified.

Removing of unsv broken back rest and Providing/ fixing new back rest and duly french polishing chair dining completely all as shown on drg and as specified.

Removing of unsv/ broken stiffeners and providing/fixing new stiffner made out of 1st class hardwood teakwood and duly French polishing chair dining completely all as shown on drg and all as specified.

Removing of unsv/broken front/rear rails and providing/fixing with new front/rear rails made out of 1st class hardwood teakwood including drilling of Cane holes and duly french polishing chair dining completely all as shown on drg and all as specified.

Removing of unsv/broken side rails and providing/fixing with new side rail made out of 1st class hardwood teakwood including drilling of Cane holes and duly french polishing chair dining completely all as shown on drg and all as specified.

French polishing to the repaired chair dining in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge. Drg No FD-228, 280

Recaning of repaired chair dining with best quality of approved plastic cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge. Drg No FD-228, 281

Chair Easy DRG NO FD-229

Removing of unsv / broken rear legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins and duly french polishing chair easy completely all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins and duly french polishing chair easy completely all as shown on drg and as specified.

Removing of unsv/broken arms rest and providing/fixing with new arm rest made out of 1st class hardwood teakwood duly shaped and duly french polishing chair easy completely as shown on drg and as specified.

Removing of unsv/broken frame of seat back frame and providing/ fixing with new frame made made to shape out of 1st class hardwood as per drg including drilling of cane holes @ 12.5 mm c/c for chair easy duly French polished all as shown on drg and as specified.

Removing of unsv/ broken front/rear rails and providing/ fixing with new rail made out of 1st class hardwood including drilling of cane holes and duly french polishing chair easy completely all as shown on drg and as specified.

Removing of unsv/broken side rails and providing/fixing with new rail made out of 1st class hardwood including drilling of Cane holes for chair Easy & duly French polishing completely all as shown on drg and all as specified.

French polishing to the repaired chair easy in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair easy with best quality of approved plastic cane of white or cream/ivory all as specified on drawing or as directed by Engineer-in-charge.

Bed with Plywood Top DRG NO FD-246

Removing of unsv plywood from head rest and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for head rest of bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv plywood from foot rest and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for foot rest of bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken long rail and providing/fixing new long rail made out of timber 1st class hard wood to bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken Short rail and providing/fixing new short rail made out of timber 1st class hard wood to bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/broken plywood from bed and providing new plywood of commercial type 12mm thick 7 ply (MR Grade not less than Rs 100 per sqft) and conforming to IS 303 of 1975 to bed ply wood top and all as specified and shown on drg. Also brackets of specified shape & size to be provided at all four corners of the bed.

French polishing to the repaired Bed with Plywood Top in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Stool Dressing DRG NO FD-27, 252, 282

Removing of unsv/ broken top long rail from frame of stool dressing and providing/fixing new long rail made out of 1st class hardwood teakwood rails including drilling of cane holes @ 12.5mm c/c.The loose joints tightened and glued with suitable bamboo pins & duly french polishing stool dressing completely all as specified and shown on drg

Removing of unsv/ broken top short rail from frame of stool dressing and providing/fixing new short rail made out of 1st class hardwood teakwood including drilling of cane holes @ 12.5mm c/c.The loose joints tightened and glued with suitable bamboo pins and duly french polishing stool dressing completely all as specified and shown on drg.

Removing of unsv/ broken leg from frame of stool dressing and providing/fixing new leg made out of 1st class hardwood teakwood and duly french polishing stoool dressing completely all as specified and shown on drg.

Removing of unsv/broken stiffner from frame of stool dressing and providing/fixing new stiffner made out of 1st class hardwood teakwood and duly french polishing stool dressing completely all as specified and shown on drg.

Removing of unsv hard rubber toes/ring from the bottom of legs and providing new rings of 4 Nos each.

French polishing to the repaired Stool Dressing in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table Dressing Ladies DRG NO FD - 251, 378

Removing of unsv/old defected mirror, unsv back plywood from mirror frame of table dressing ladies and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood of commercial type, MR Grade, 6 mm thick, 5 ply at the back side of mirror frame and fixing it to table dressing ladies and duly french polishing the frame all as directed and specified and shown on drg.

Removing of unsv/ chipped/old laminated sheet from the top, side & drawer face of table dressing Ladies and providing new laminated sheet of natural teak finish 1 mm thick on top, sides and drawer face and 1st class teak wood beading 4 mm thick provided to box of table dressing ladies all as directed and specified and shown on drg.

Removing of unsv/ broken plywood and providing new plywood of commercial type, MR Grade, 6 mm thick, 5 ply to the drawer bottom of table dressing ladies all as specified and shown on drg.

French polishing to the repaired Table Dressing Ladies in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table Dressing Gents DRG NO FD- 31, 230

Removing of unsv/old defected mirror, unsv back plywood from mirror frame of table dressing gents and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood of commercial type, MR Grade, 6 mm thick, 5 ply at the back side of mirror frame and fixing it to table dressing gents and duly french polishing the frame all as directed and specified and shown on drg.

Removing of unsv/ chipped/old laminated sheet from the top, side & drawer face of table dressing gents and providing new laminated sheet of natural teak finish 1 mm thick on top, sides and drawer face and 1st class teak wood beading 4 mm thick provided to box of table dressing gents all as directed and specified and shown on drg.

Removing of unsv/ broken plywood and providing new plywood of commercial type, MR Grade, 6 mm thick, 5 ply to the drawer bottom of table dressing gents all as specified and shown on drg No FD- 31, 231

French polishing to the repaired Table Dressing Gents in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge and shown on drg No FD- 31, 231

Hat Stand with Mirror DRG NO FD- 23, 233

Removing of unsv/old defected mirror and providing new sheet glass electro-copper plated mirror 5 mm thick and fixing to Hat stand including French polishing all as specified and shown on drg.

Removing of unsv/broken Plywood and providing new plywood of commercial type, MR Grade, 4 mm thick 3 ply to back of Hat stand all as shown on drg and specified.

French polishing to the repaired Hat Stand with Mirror in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table Bed Side DRG NO FD - 276

Removing of unsv/ chipped/old MDF/particle board from top and providing new top made of pre laminated MDF board 18 mm to table bed side all as specified and shown on drg.

Removing of unsv/ broken Plywood from back of table bed side and providing new plywood of 6 mm thick commercial type MR Grade to the back of table bed side all as shown on drg.

Removing of unsv/broken MDF/particle board from side and providing new side made of MDF board 18 mm to table bed side all as shown on drg and as specified.

Removing of unsv/broken MDF/particle board from bottom and providing new bottom made of MDF/particle board 19 mm to the table bed side all as shown on drg and as specified.

Removing of unsv shelf and providing new shelf made of MDF/particle board 18mm thick to table bed side all as shown on drg and as specified.

French polishing to the repaired Table Bed Side in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Side Board DRG NO FD - 241

Removing of unsv top from side board and providing new top made out of 18mm thick prelaminated MDF board & providing teak wood beading on front side, fixing to side board with glue and metal screws including french polishing completely all as specified and shown drg.

Removing of unsv side from side board and providing new side made out of 18mm thick prelaminated MDF board & providing teak wood beading on front side, fixing to side board with glue and metal screws including french polishing completely all as specified and shown drg.

Removing of unsv bottom from side board and providing new base made out of 18mm thick commercial plywood & providing teak wood beading on front side, fixing to side board with glue and metal screws including french polishing completely all as specified and shown drg.

Removing of unsv shutter from side board and providing new shutter made out of 18mm thick prelaminated MDF board & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv drawer from side board and providing/fixing new drawer made out of prelaminated MDF board 12mm thick side & back and 18mm thick front wall, 6mm thick commercial plywood 5ply fixed to bottom including teak wood beading all around of drawer top with glue, nails and metal screws where necessary, one No chromium plated knob and french polishing completely to all wooden surfaces all as specified and shown on drg.

Removing of unsv back plywood from side board and providing new plywood commercial 6mm thick 5ply fixed to side board with glue and metal screws including french polishing complete to all wooden surfaces all as specified and shown on drg.

Removing of unsv shelf from side board and providing new shelf made out of 18mm thick prelaminated MDF board & providing teak wood beading on front side including french polishing complete and fixing to side board all as specified and shown drg.

Removing of unsv legs frame of side board from bottom and providing new legs frame made out of Indian seasoned teak wood including french polishing complete and fixed to bottom of side board with glue and metal screws all as directed and specified and shown on drg.

French polishing to the repaired Side Board in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Book Case DRG NO FD- 45/237

Removing of unservicable top from book case & providing/fixing with new top made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable side from book case & providing/fixing with new side made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable shelf from book case & providing/fixing with new shelf made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable shutter from book case & providing/fixing with new shutter made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unsv back plywood from book case & providing/fixing new plywood 6mm thick MR Grade & providing 4mm thick teak wood beading wherever necessary & french polishing completely

Removing of unservicable leg frame from book case & providing with new leg frame made out of 1st class hard wood teakwood & including french polishing complete all as specified and shown on drawing

French polishing to the repaired Book Case in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table dining 6 persons DRG NO FD- 30, 273, 337

Replacement of unsv top of table dining 6 pers and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table dining 6 persons in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table dining 8 persons DRG NO FD- 30(M), 239, 273

Replacement of unsv top of table dining 8 pers and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table dining 8 persons in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Teapoy wooden DEG NO F-34 (M), 232, 278, 382

Replacement of unsv top of teapoy wooden and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Teapoy wooden in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table centre DRG NO FD- 225, 274

Replacement of unsv top of Table center and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table Centre in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table peg DRG NO FD-25 (M), 236, 277, 384

Replacement of unsv top of Table peg and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table Peg in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table writing DRG NO FD - 33 (M), 275

Replacement of unsv top of Table writing and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table writing in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Teapoy varandah DRG NO FD-35, 255

Replacement of unsv top of Teapoy verandah and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Table office clerk steel DRG NO FD- 84 (M), FD - 10

Replacement of unsv top of Table office clerk steel and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Table office officers steel DRG NO FD- 84 (M), FD - 10

Replacement of unsv top of Table office officers steel and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Table centre two tier DRG NO FD-225, 274

Replacement of unsv top of Table center two tier and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Table Computer DRG NO FD-E6/MAP/03

Replacement of unsv top of Table computer and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing of unsv telescopic channel from key board of table computer and providing/fixing new telescopic channel (12"/16''/18'') as required of superior quality to key board of table computer all as specified and shown of drg.

Removing of unsv lock from drawer of table computer and providing/fixingnew multipurpose brass lock of superior quality with duplicate brass keys to drawer of table computer all as specified and shown on drg.

Chair computer DRG NO GE (K) FD - 64/84, FD/E6/MAP/01

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 25mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg..

Almirah large steel with shelves : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun,complete all as specified, directed and shown on drg No DGS&D, FD-67, FD-1031, FD-1033, FD-1037

M&L for removal of existing worn out paint from external surface of Almirah large steel 1/2Sx1/2H including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun, complete all as specified, directed and shown on drg No DGS&D, FD-67, FD-1031, FD-1033, FD-1037

Almirah medium steel with shelves : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun, complete all as specified, directed and shown on drg No DGS&D, FD-243/1032

Book shelf open large steel : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun,complete all as specified, directed and shown on drg No FD- 69

Book shelf open small steel : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun , complete all as specified, directed and shown on drg No FD- 69

Book case steel : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun ,complete all as specified, directed and shown on drg No FD- 90/1028

Locker steel 8 unit : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun, complete all as specified, directed and shown on drg No FD-127

Locker steel 6 unit : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun ,complete all as specified, directed and shown on drg No FD-127

Locker steel 4 unit : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun, complete all as specified, directed and shown on drg No FD-127

Locker steel : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun,complete all as specified, directed and shown on drg No FD-257 & FD-1029

Cabinet filling steel 4 drawer :M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun, complete all as specified, directed and shown on drg No TP, DGS&D, GE (K) FD - 35/86

M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer in two shades using spray gun,complete all as specified, directed and shown on drgs.

Rack Steel of Size (2500 x 900 x 650mm) Drg No TP/FD - 106

Rack steel with adjustable w/8 shelves (2475x1050x450mm) Drg No TP

Rack side steel of size (675x700x250mm) Drg No TP/FD - 106

Rack steel adjustable with 6 shelves of size 1905x915x450mm Drg No TP

Rack steel adjustable shelving angle post open type of size 2209.8 x 914.4 x 457.2mm. Drg No TP

Rack steel of size 710 x 900 x 375 mm. Drg No TP

Rack open steel of size 2440x915x455 mm Slotted angle Drg No TP

Rack steel storage with 4 shelves making 3 compartments of size 2400 x 900 x 600 mm. Drg No DGS&D

Rack steel with slotted angle 5 slots of size (3000x1250x600mm) Drg No TP

Side rack steel with tray Drg No FD-106 (M)

Shoe rack steel Drg No FD/E6/MAP/02

Chair Tubular Steel with Arms :- M&L for repairs to chair tubular steel with arms by removing all old paint by scrapping down and carrying out repairs such as removing dents, necessary welding wherever required and providing new hard rubber shoes and applying two coat of Olive Green synthetic enamel paint over a coat of primer after preparation of steel surfaces and flat iron strips 20mm x 3mm, two in numbers on each seat and back, shall be welded to frame of chair complete all as specified, directed and shown on Drg No FD-75 (M)

Chair Tubular Steel without Arms:- M&L for repairs to chair tubular steel without arms by removing all old paint by scrapping down and carrying out repairs such as removing dents, necessary welding wherever required and providing new hard rubber shoes and applying two coat of Olive Green synthetic enamel paint over a coat of primer after preparation of steel surfaces and flat iron strips 20mm x 3mm, two in numbers en each seat and back, shall be welded to frame of chaircomplete all as specified, directed and shown on Drg No FD-75 (M)

Repair/Removing of unsv legs and providing new legs made out of 18 guage MS black sheet duly painted with two coat Synthetic enamel paint over a coat of red oxide primer and welding to Almirah large steel with shelves & 1/2H 1/2S. DGS&D FD-67/1031/1033

Repair/Removing of unsv legs and providing new legs made out of 18 guage MS black sheet duly painted with two coat Synthetic enamel paint over a coat of red oxide primer and welding to Almirah Medium steel with shelves. DGS&D FD-243/1032

Repair/Removing of unsv legs and providing new legs made out of 18 guage MS black sheet duly painted with two coat Synthetic enamel paint over a coat of red oxide primer and welding to Locker steel & Locker steel 8/6/4/ unit .Drg No FD-54 / FD-257/FD-1029, FD-127 & DGS&D

Removing unsv drawers and Providing new drawer made out of 20G thick MS sheets to table office offrs/clerk steel all as specified and given in Drg No DGS&D, FD - 84, GE (K) FD -4/83

Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for almirah large/medium steel with shelves, 1/2H, 1/2S, Book case steel & Locker steel Drg No DGS&D, FD-67, FD-243, FD- 54, FD- 257, 1031, 1029, 1032, FD 90/1028

Removing of unsv/broken handles and providing new handle steel chromium plated for almirah large/medium steel with shelves, 1/2 H 1/2S & locker steel. Drg No DGS&D, FD-67, FD-243, FD- 54, FD- 257, 1031, 1029, 1032, 1033, FD 90/1028

Removing of unsv hinges and providing new steel hinges and welding to door shutters of almirah large/medium steel with shelves, 1/2 H 1/2S & locker steel. Drg No DGS&D, FD-67, FD-243, FD- 54, FD- 257, 1031, 1029, 1032, 1033, FD 90/1028

Repair/Removing of unsv shelves, of Almirah large/medium steel with shelves and making new shelves out of 20 guage black MS sheet duly painted with 2 coats synthetic enamel paint over a coat of red oxide primer as required at site and providing with necessary cleats/bolts & nuts.Drg No DGS&D, FD-67, FD-243, 1031, 1032

Cot DT steel with plywood top : Removing of old unserviceable plywood from cot DT steel with plywood top and supply and fixing plywood of 12mm thick,7 ply, commercial type, (MR Grade not less than Rs 100 per sqft) and MS angle of size 25x25x5mm shall be fixed & welded as a middle span which should match with top to fix plywood without leaving gap and MS plate iron cleats 10 Nos of size 25x5x60mm made to shape and fixed to both type of rails (02 Nos each rails) by welding as directed by Engineer-In-Charge Note:- Angle (Middle spn) and flat (Cleats) iron should have proper holes to fix plywood on top with (30x5mm) size nuts and bolts with washer and all steel section shall be painted with two coats of synthetic enamel paint smoke Grey over a coat of steel primer. Drg No GE (K) FD-41/86

Charpoy GI pipe with plywood top DRG NO FD -220

Removing unserviceable Ply top from GI charpoy, tightening complete charpoy ie loose checknuts,elbows,Long Rails and short Rails and supply and fixing ply wood of 12mm thick, 7 Ply ,commercial Type, MR Grade, ISI Marked of size 1980x900mm of make- greenply/Century/Kitply, complete all as specified and directed. .

M&L Removing old unserviceable long rail from GI charpoy and supply and fixing new long rail of size 1884mm long made out of 32 mm bore medium grade GI Pipe duly threaded on both ends and fixing to charpoy duly carrying out welding of MS support angles completely all as specified and as directed by Engineer-in-charge. Note ;- 1)The items includes threading both sides in new long rail and 2) Old unserviceable long rail obtained shall be reused in Item No 47.3 below.

M&L for removing old unserviceable short rail from GI charpoy and fixing new short rail of size 814mm long made out of long rails retrieved vide items No (2) herein duly threaded on both ends & fixing to charpoy duly carrying out welding of MS support angles completely all as specified and directed.Note ;- 1) The items includes threading both sides in new short rail & 2) Old unserviceable short rail obtained shall be reused in Item No 47.4 below.

M&L for removing old unserviceable legs from GI Charpoy and fixing new legs of size 394 mm long made out of short Rails retrieved vide item No (3) herein duly threaded on one end including 3mm thick MS sheet( made to shape of the bottom) in bottom and two Nos clamps as shown on Drg by welding completely all as specified and directed by Engr In Charge

M&L for removing old unserviceable three way elbow and supply and fixing new elbow 32 mm bore (ISI marked) to GI charpoy, complete all as specified and as directed by Engineer-in-charge.

M&L for removing old unserviceable check nuts and supply and fixing new check nuts 32 mm bore 6mm thick to GI Charpoy, all as specified and as directed by Engineer-in-charge.

M&L for removing old unserviceable short rail from GI charpoy and fixing new short rail of size 814mm long made out of 32 mm bore medium grade GI Pipe duly threaded on both ends and fixing to charpoy duly carrying out welding of MS support angles completely all as specified and directed by Engineer-in-charge Drg No FD - 221

M&L for removing old unserviceable legs from GI charpoy and fixing new leg of size 394 mm duly threaded one end and including 3 mm thick MS Sheet ( made to shape at the bottom) in bottom two nos clamps ( as shown in drawing) by welding completely all as specified and directed by Engineer-in-charge. Drg No FD - 220

SOFA SETS DRG NO FD - 258/281/373

M&L for removing the existing unserviceable tapestry cloth, cushion of sofa set and replacing with new tapastry cloth including marking cloth with foam cushion 40 density 100mm thick of size 530mm x 560mm x 100mm, Make -Kurl-on, Sleepwell, Springwell etc rest all as shown on drg and as directed by Engr-in-Charge. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be of mat finish and shall not less than Rs. 350/- per metre and as approved by Engr-in-Charge.

Seat and back shall be provided with tapestry cloth costing not less than Rs.350/- per RM. Shade of cloth shall be approved by Engr-in-Charge. Cloth shall be with provision of that and suitable chain for easy replacement of cloth for the seat and back.

Removing old polish, dust, spots from Sofa set to seat 4 persons by scrapping by means of emery paper, prepare smooth surface and fill the detached gaps by wax etc and applying two coats of melamine polish all as specified and directed by Engineer-in-Charge.

Removing old polish, dust, spots from Sofa set to seat 5 persons by scrapping by means of emery paper, prepare smooth surface and fill the detached gaps by wax etc and applying two coats of melamine polish all as specified and directed by Engineer-in-Charge.

Chair Verandah:- M&L for removal of unserviceable cane from Chair Verandah scraping existing paint from frame with sand paper and M & L for painting with two coats of synthetic enamel paint white colour and M & L for recanning with white or cream ivory plastic cane 4mm wide & 0.4mm thick half round godrej pattern, including replacing of hard rubber toes etc complete all as specified, directed and shown on drg No FD- 256, 259

Polishing of Wooden Furniture

Removing old polish, dust, spots from furniture items by scrapping by means of emery paper, prepare smooth surface and fill the detached gaps by wax etc and applying two coats of melamine polish on all furniture items listed under Sl No 52.1 to 54.5 herein below all as specified and directed by Engineer-in-Charge.

Almirah large 1/2 S 1/2H Drg No DB - 4039

Almirah large with shelves Drg No DB - 4116

Almirah medium with shelves Drg No DB - 3959

Bin soiled linen Drg No FD- 15/ FD - 244

Book case small Drg No DB -4071

Book shelf open large & book case library pattern Drg No DB -4021

C S Sharma and Co

Unity Enterprises

Mahesh Traders

DHARICHHAN ENTERPRISE