Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹35.2 LAccepted-AOC | 1 | Accepted-AOC being a lowest tenderer | |
| 2 | 2₹35.7 L+₹47,237.50 (1.34%)Rejected-Finance | 2 | Rejected-Finance quoted rate are high | |
| 3 | 3₹36.1 L+₹88,042.50 (2.50%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | 3 | Rejected-Finance quoted rate are high | |
| 4 | 4₹36.7 L+₹1.5 L (4.40%)Rejected-Finance A 2 206 SAI DWARKAMAI NIBM ROAD KONDHWA PUNE 411 048 | PUNE | MAHARASHTRA | 411048 | 4 | Rejected-Finance quoted rate are high | |
| 5 | 5₹36.9 L+₹1.7 L (4.97%)Rejected-Finance | 5 | Rejected-Finance quoted rate are high |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH PUNE
NO 1 GENERAL BHAGAT MARG PUNE 411040
8423 REPAIRS / REPLACEMENT TO WOODEN JOINERY, ALUMINIUM JOINERY AND CERTAIN MISC BR WORKS AT AICTS, NGM, OGM, FAFA QTRS, AREA UNDER AGE BR I SOUTH PUNE
2023_MES_595229_1
8423 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
273 days
GE SOUTH PUNE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹95,000
4 Jul 2023
13 May 2023
12 Jun 2023
13 May 2023
10 Jun 2023
29 May 2023
Amount
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 10 mm thick cement plaster surfaces using CM (1:6) by using ready mix plaster etc incl Sagol finish all as specified. (Make : Godrej,Build Well, Ascolite)
Rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound by using ready mix plaster as per manufacturers instruction finished with sponge finish complete all as specified and as directed. (Make : Godrej, Build Well, Ascolite) (Note : WPC shall be measured and paid seperately)
Supply only integral water proofing compound complete all as specified and as directed.
M&L for Preparation of new plastered surfaces and applying two coats of cement base paint on wall complete all as specified and as directed.
M&L for two coats of OBD on walls over a coat of alkali resistance primer including preparation of new surfaces complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors appron etc complete all as specified and as directed.
Demolition of Brick work, solid block or stone Masonary built in cement mortar or cement lime mortar after proper supporting of existing structure complete all as specified and as directed.
M&L for brick work with fly ash Bricks straight or curved on plan exc. 6 mtr mean radius with moduler bricks in CM 1: 6 complete all as specified and as directed.
M & L for 25 mm thick PCC (1:2:4) type B0 (12.5mm graded stone aggregate) as in levelling course of floor tiles etc complete all as specified and directed.
M & L for PCC type B1 1:2:4 (20mm graded aggregate) as in cills, steps, bands, plinth courses, copings, apex stone, bed plates kerbs levelling course etc. complete all as specified and as directed.
M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius complete all as specified and as directed.
M&l for rounding the edges of stone slab, one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.
S & F Machine cut cuddappa stone slab 20 to 25 mm thick for making cooking platform etc. complete all as specified and as directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete;
M&L for hard core of Broken stones gauge not exc 63mm deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.
M&L for Vitrified coloured tiles 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but not exc. 0.42 Sqm in floors, set an jointed in neat cement slurry and pointed in white or coloured cement to match including laid over 20 mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for matt finished, Joint free coloured ceramic tiles 7 to 8 mm thick 400 x 400mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc as in flooring complete all as specified and directed.
M & L for machine cut kota stone slab, flooring 20 to 25 mm thick laid over and including 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigments to match with the slab including rubbing and mirror polishing etc, complete all as specified and directed.
M & L for kota stone slab as in skirting /dado 20 to 25 mm thick in wall including 10mm thick CM (1:4) backing coat set and jointed with grey cement slurry mixed with pigments to match with the slab including rubbing and polishing complete all as specified and as directed.
M & L for coloured galzed ceramic tiles 600 x 300 x 7mm thick on vertical surfaces set and jointed neat cement slurry and pointed in coloured cement to match with and including 10mm thick rendering on wall in CM 1:4 etc. complete all as specified and as directed.
Dismantling of wall / ceiling boards of any thickness including cover fillets complete all as specified and as directed.
M&L for gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand / make with and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle hung from ceiling using 2 mm thick G.I. suspension wires spaced at 1200 mm on main runners including making nitches for fans / light complete all as specified and directed.
M & L for 4mm thick asbestos cement sheets in ceiling fixed complete with aluminium grid frame for ceiling with using 36.5mm x 23.5mm x 1.5mm thick main tee 23.5mm x 23.5mm x 1.28mm cross tee and 25mm x25mm x1.50mm angle fixed to perimeter of wall for false ceiling including necessary supporting hanger with 2.00mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended at 120cm center to center both way of grid shall be 605mm x 605mm etc complete all as specified and directed.
Dismantling AC corrugated/ semi corrugated sheets in roofing complete all as specified and as directed.
S & F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, walls etc fixed with L or J type hooks complete as in patches complete all as specified and as directed.
All as per item No. 27.00 above but fixing only complete all as specified and as directed.
All as per item No. 27.00 above but serrated ridge for corrugated or semi corrugated sheets complete all as specified and as directed.
Dismantling of single layer mangalore pattern tiles or similar tiles in roofing etc complete all as specified & directed
Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc, complete all as specified & directed
Dismantling timber scantling 40 Sqcm and over in section in any position (unframed wok) etc, complete all as specified & directed
Dismantling boarding any description fixed in any position with nails etc, complete all as specified & directed.
Dismantling timber scantling under 40 sqcm in section in any position (unframed wok) etc complete all as specified and directed.
M & L for IInd class hard wood plain fillets square, rectangular or triangular in section clean sawn secured with nails, sectional area exc. 13 Sqcm but n. exc 25 Sqcm etc, complete all as specified & directed.
All as per item No 35.00 above but except fillet, complete all as specified & directed.
M & L for IInd class hard wood clean sawn batten at 30cm center to center sectional area exc 5 Sqcm and not exc 15 Sqcm etc, complete all as specified & directed.
M&L for roof tiles mangalore pattern inter locking tiles, side joints laid dry etc complete all as specified and as directed.
All as per item No 38.00 above but except tiles etc complete all as specified and as directed.
M & L for ridge tile or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM (1:6) etc, complete all as specified & directed.
All as per item No 40.00 above but except tiles etc, complete all as specified & directed.
S & F 25 mm thick 2nd class hardwood boarding butt joints plained both sides complete all as specified and as directed.
All as per item No 42.00 above but fixing only complete all as specified and as directed.
M&L for second class hard wood clean sawn timber fixed as in scantling complete all as specified and as directed.
All as per item No 44.00 above but fixing only complete all as specified and as directed.
Taking down chowkat wooden/steel with shutters (without taking off shutters from frame) not exc 1.5 Sqm each complete all as specified and as directed.
All as per item No 46.00 above but exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and as directed
Taking down shutters of any description exc 1 sqm but not exc 2 sq m each complete all as specified and as directed.
Taking down shutters of any description exc 2 sq m each complete all as specified and as directed.
Taking down shutters of steel window by means of gas cutter of any size complete all as specified and as directed.
S & F pressed steel frames for doors with one & more rebates incl necessary fixing lugs, hinges -06 Nos., lock strike plate etc complete as specified size of frame 125 x 60mm including filled with PCC 1:3:6 type C-0 complete all as specified and as directed.
All as per Sr. Item No. 51.00 above but size of frame 105 x 60 mm & hinges -03 Nos complete all as specified and as directed.
S&F IInd class hard wood in chowkats & frames, wrought, framed & rebated etc complete all as specified and as directed.
S & F IInd class hard wood 35mm thick factory made, flush shutter, solid core construction, with block board core and plywood face panels, commrrcial type on both side complete all as specified and as directed.
S & F IInd class hard wood 30mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass,gauge,etc. (w/o sash bar) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F MS work as in guard bars, using with round or square bars & flat iron etc incl necessary drilling,welding etc complete & simillar articles confirming to Fe-290 grade E-165 complete all as specified and as directed.
M&L for 3mm thick veneer over 35mm thick flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both side including 3mm thick, 1st Class hard wood teak beading all around on edging complete all as specified and directed.
M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over priming coat of red oxide complete all as specified and as directed.
S & F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18mm etc complete all as specified and directed.
S & F butt hinges of cold rolled mild steel, medium weight, 100mm size fixed with welding with existing MS door frame complete all as specified and as directed.
S & F aluminum anodized barrel tower bolt of extruded section 200mm size etc complete all as specified and directed.
S & F aluminium anodized sliding door bolt 300mm size etc complete all as specified and directed.
S & F aluminum anodized bow handle caste type 150mm size etc complete all as specified and directed.
S & F in repair 0.50mm thick aluminium plain sheet lining bottom rail of door fixed with nail complete all as specified and as directed.
S & F 150mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring and rubber shoe complete all as specified and as directed.
S & F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 156 of SSR Part-II 2010 Refer item No. 8080 as specified and directed by Engr-in-charge.
M & L for PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in blocks for fixing hold fasts of door/ window frames complete all as specified and as directed.
S&F 19mm thick commercial plywood Conforming to IS-12823, Gde-I, quality, extrior grade, commercial type as in Kitchen Cabinet etc fixed with screw including 0.9mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture instructions at both side all as specified and directed by Engr-in-Charge.
S&F in repairs plain fillets in Ist class hard wood,sectional area exc 13 sqcm & not exc 25 sqcm wrought fixed with screws etc complete all as specified and as directed.
S&F in replacement continuous Piano hinges, mild steel bright finished or electro galvanised width of flap 30 mm complete all as specified and as directed.
S&F in repair fancy type handle for cubboard,drawer etc. complete all as specified and as directed.
S&F in repairs Magnet catches and striking plate complete all as specified and as directed.
S&F in repairs 75mm aluminium anodised Hasps & Staples safety type and fixed with screws complete all as specified and as directed.
All as per Sr. Item No. 75.00 above but 100 mm complete all as specified and as directed.
S&F 25 mm dia powder coated aluminium alloy (medium weight) curtain rod complete all as specified and as directed.
S&F bracket suitable for fancy type powder coated curtain rod 25mm dia complete all as specified and as directed.
S&F aluminium powder coated three track sliding window with two or more shutters with & including 4 mm thick tinted glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc using PVC beading etc using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved. fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes. (a) Frame bottom 20620 (b) Frame top & side 20681 (c) Shutters top & bottom 20844 (d) Shutter inter lock 20724 (e) Handle (Side ) for 20606 shutters
All as per Sr. Item No. 79.00 above but with provision of opening for AC complete all as specified and as directed by Engineer-in-Charge.
S&F aluminium powder coated single leaf door on pivots alongwith hydraulic door closer, door lock, handles, 5mm thick glass i panel and etc., fixed with rubber beading and glazing clips and using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge (a) Rectangular tube 14005 (b) Shutter vertical (c) Shutter top rail 19503 (d) Shutter Middle rail 060 (e) Shutter Bottom rail 19511 (f) Glazing clips 19352
S&F aluminium powder coated partition using following sections of `Jindal Aluminum Ltd' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved with 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue complete as directed fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mm X 20mm at an interval of 0.5m alround the track including drilling holes. :- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352
Dismantling of wrought iron of any description not otherwise provided for, complete all as specified and directed.
M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed.
S & F roof sheeting prepainted galvalume aluminium zinc coating GI based mangalore pattern corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet, complete all as specified and directed.
Removing building material exc. 1 km total distance including loading, unloading and stacking at the destination to a distance n.exc. 5 KM, complete all as specified and directed.
S&F in repairs door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed
S&F in repairs aluminium heavy duty door closer to be fittied on floor complete all as specified and as directed.
S&F 0.56 thick plain, aluminium sheeting, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.
Hacking out old broken glass any thickness, size, quality or description from wooden / iron frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S&F 3mm thick glass ordinary, quality and glazing with oil putty or wooden bedding all as specified not exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden bedding all as specified n. exc 0.5 sqm in each pane complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm & fixed with stainless steel wire staples complete all as specified and as directed.
S & F 12mm thick plywood grade BWR type BB fixed to wall or timber frame work all as specified & directed by Engr-in-Charge.
M & L for plain fillets of 2nd class hard wood, wrought, exc 13 but not exc 25 Sqcm in section square, rectangular or triangular in section, secured with screws complete all as specified and as directed.
S&F in repairs IInd class hard wood of sectional area 8 Sqcm to 12 Sqcm round beading to top & bottom of wall panelling work with melamine polish for architect look fixed with screws etc complete all as specified and as directed.
S&F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain coloured or wood grain printed as approved by EIC / prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturers specifications complete all as specified and as directed. (Make : Rajshri / Duroplast / Plastopan or equivalent)
S&F in repairs 5mm thick PVC sheet fillet of width 35mm suitable for wall paneling inclusive of fixing as in grid / frame on wall for wall lining / panelling as manufacturers specification complete all as specified and as directed.
S&F PVC decorative beading of 2 to 5mm thick, moulded / designed suitable for PVC panelling complete all as specified and as directed.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm & fixed with stainless steel wire staples to wooden / steel frames complete all as specified and as directed.
REKHA ELECTRICALS
Gauri Associates
SARATH ENTERPRISES
M/S BRJ & SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .