SPL REPAIR TO BLDG NO P 88 P 89 AND P 75 AND FIRE FIGHTING RESERVOIR BEHIND BLDG NO P 87 OF 100 MTN BDE CAMP AND PROVN OF CERTAIN LBW AT SEVOKE ROAD MIL STN UNDER GE SEVOKE ROAD

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&Lfor brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed

Demolition of cement concrete in ground floors and paving n.exc 15 cm thick (below or above ground level) unreinforced complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection ,foot path and hand standing finished concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor of reservoir finished even and smooth using extra cement with WPC for storage of water complete all as specified and directed (WPC shall be measured seperately)

M&L for 40mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in floor finished even and smooth using extra cement complete all as specified.

M&L for machine cut kota stone slab 18-22 mm thick of (size not less than 55cm X 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting,washing,rubbing and polishing ( beeswax polish ) over and including cement screed bed 20 mm thick in cement mortar (1:6) including rubbing and mirror polishing,including marble strips as in border (100mm wide)complete all as specified and directed by Engineer in charge.

M&L for machine cut kota stone slab 18-22 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting,washing,rubbing and polishing ( beeswax polish ) as in skirting, treads and riser of steps etc. over and including 10mm thick rendering in cement mortar (1:3) on brick work or concrete surface,complete all as specified.

Dismantling asbestos cement (corrugated , semi corrugated , etc ) sheets in roof coverings complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof Covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Dismantling wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets, complete all as specified and directed.

S&F 605X605 mm size anodised aluminium snap grid frame work for false ceiling, including 4 mm dia GI hangers (upto 1200 mm length) for adjusting level, fixed to roof rafter and purline @ 600mm centre to centre, with and including 4mm thick decorative type non asbestos fibre cement building boards fixed or laid/inserted to aluminium frame work as in ceiling complete all as specified and as directed. (Note : The size of aluminium main and cross Tee shall be 40 mm x 25mm x 2mm and size of angle shall be 25mm x 25mm x 2 mm).

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description all as specified

M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as specified.

M&L for 20 mm thick rendering on fair faces of brick or concrete surfaces in CM 1:4 in two layers of 10mm each, using water proofing compound in top layer only including. finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.

Supply only water proofing compound (integral) complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over one coat of wall putty complete all as specified and directed. .

M&L complete removal of existing treatment and applying two coat of cement base paint on wall etc complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Taking down chowkats or frames with shutter ( without taking off shutter from the frames ), area n. exc. 1.5 Sqm each and removal from site including cutting of holes for removal of hold fasts and making good using new bricks or in cement concrete 1:2:4 type B0 complete all as specified.

All as per item No 22 here in before but area exc. 1.5 Sqm and n. exc. 4.00 Sqm each complete all as specified.

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, including providing one shop coat of zinc chrome primer. Complete all as specified and directed.

Supply and fixing factory made shutter, 35 mm thick, 2nd class hardwood rail and style, plain, framed, panelled shutters (three panel) with lock rail and panel of 9 mm BWP commercial ply. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified.

Supply and fixing IInd class hard wood factory made 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc. edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

M&L for painting to new wooden surfaces of any description not otherwise described over 10cm width or girth, and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified.

S&F MS butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section length of bolt 200 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type anodised of size 150 mm complete all as specified and directed.

S&F 300 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified.

S&F mild steel square bar 12mm in grill or guard bars welded to steel window all as specified and directed.

M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer over 10cm width or girth complete all as specified and as directed.

M&L for Preparing old decorated surfaces of walls including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coat of white wash on walls. complete all as specified and directed.

M&L Complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for non skid coloured ceramic tiles of 7 to 8 mm thick (squre/rectangular) area Exceeding 0.18sqm but not exceeding 0.38 sqm as in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles inclding 20 mm thick screed bed or beding layer of CM 1:6 for fixing of tiles complete all as specified and as directed

M&L for glazed coloured ceramic tiles of size 450x300x 7mm thickness in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles including 10 mm thick backing layer of CM 1:3 for fixing of tile on wall complete all as specified and as directed

S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified.including one coat of zinc chrome primer as in shop coat .

S&F steel ventilators with top hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified.including one coat of zinc chrome primer as in shop coat .

S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars, including one coat of zinc chrome primer as in shop coat dovetailed or welded complete all as specified.

S&F mild steel flat iron fillets ( for securing wire mesh etc) , wind ties etc including all necessary drilling bolting or riveting, etc, and similar work confirming to Fe-290 Gde E-165.complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n'exc 0.50 Sqm in each pans complete all as specified and as directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 3 mm thick Figured glass and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

S & F in repair stainless steel tubular depray rod 28mm dia as per sample kept in GE Office complete as specified and directed.

S&F stainless steel brackets for depray rod 28mm dia as per sample kept in GE Office complete as specified and directed.

S&F stainless steel knobs for depray rod 28mm dia as per sample kept in GE Office complete as specified and directed.

Surface excavation .n. exc 30 cm deep and averaging 15cm deep in soft/loose soil including removing of bushes complete all as directed.

Excavation in trenches, in soft / loose soil n exc 1.5 m wide and n exc 1.5 m in depth for foundation or cable / stay etc and getting out complete all as specified and directed.

All as per item no.49 above but depth exc 1.50 m and n.exc 3.00 m

Excavating over areas not exceeding 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

All as per item no.51 above but depth exc 1.50 m and n.exc 3.00 m complete all as specified and directed.

Returning, filling in including spreading levelling watering and well ramming in layers n exc 25 cm in soft/loose soil. complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point

M&L PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete.complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. (consolidated thickness shall be measured)

M&L for Hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder. complete all as specified and directed. (consolidated thickness shall be measured)

M&L 100 mm thick PCC 1:4:8 type , D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge

M&L for 50mm thick Cement concrete ,1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floor complete all as specified and as directed.

M&L for 30mm thick bitumen mastic flooring consisting of well graded fine aggregate of crushed stone screenings lime stone dust as a filler,a course aggragate in the size of 6mm and high visco grade of bitumen having a softening point of 65 to 100 degree centigrade of 10/20 or 90/15 (blow bitumen) the composition for 100sqft of about 30 mm thickness mastic flooring an approximate quantity and percentage of ingradients shall be as under (i) Bitumen:-80Kg(44%) (ii) course aggregate ;-40Kg(22%) (iii) Crushed stone screening :-30kg(17%) (iv) Lime stone dust:30kg (17%) (v) Total 180kg(100%) Note: The bitumen mastic flooring work shall be got execute throughspecialist agency as approved By GE.

M&L for machine cut kota stone slab 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting,washing,rubbing and polishing ( granite finish ) over and including cement screed bed 20 mm thick in cement mortar (1:6) including rubbing and mirror polishing complete all as specified and directed by Engineer in charge.

M&L for machine cut kota stone slab 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting,washing,rubbing and polishing (granite finish) as in skirting over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surface,complete all as specified.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) for damp proof course,40 mm thick to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed (WPC shall be measured seperately)

M&L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending and binding with M.S wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed.

S&F mild steel bars TMT 6mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 65 above but 5 mm dia and over upto and including 10 mm dia as in stirrups spacers, and binders.

S&F rolled mild steel sections any type including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe -290 Gde E-165 complete all as specified and directed.

M&L preparing new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc complete all as specified, including providing one shop coat of zinc chrome primer.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 200 mm long Aluminium handle cast type anodised complete all as specified and directed.

M&L Providing cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregates) for filling in pressed steel frame, lintels, hold fast block and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates complete all as specifed as direted

M&L for RCC 1:2:4 type BI (20 mm graded stone aggregate) nominal mix, as in chajja & lintel complete all as specified and directed

Use and waste formwork to chullah hoods, chajja, troughs and similar items including edges for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for brickwork, with fly ash bricks straight or curved on plan exc 6 m mean radius, built in CM1:6 complete all as specified

M&L for Brickwork with subclass B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Use and waste formwork to Beams/Lintels and similar items including edges for flat, rough finished surface of concrete complete all as specified and directed

M&L for 75mm thick PCC1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings fixed to wall as in short length complete all as specified and directed.

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings fixed to wall as in short length complete all as specified and directed.

S&F rolled mild steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china EWC white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat bottom and cover and hinging device complete all as specified.

S&F 15mm bore CP Toilet Hand Pressed Nozzle (Health faucet) with 1.5 mtr long tube with CP wall bracket including taking down the old one complete all as specified and as directed by Engr In charge

S&F in repair vitreous china urinal, half stall type, white including waste pipe,waste coupling and sprinkle push type including CP Spreader , flush pipe and waste pipe complete all as specified and directed

S&F PVC valveless, symphonic action type , flushing cistern, low level, white with inlet ball valve float and handle including bracket.complete all as specified and directed

S&F vitreous china wash hand basin white colour flat back of size 550x400mm including pedestal and CI brackets, CP brass waste coupling 32mm and PVC waste pipe 32 mm dia etc complete all as specified and directed.

S & F 15mm bore pillar tap cast coppy alloy, fancy type, chromium plated screwed down high pressure long screwed shanks and fly nuts complete all as specified and as directed.

S&F bib tap cast copper alloy, 15 mm bore, CP, fancy type screwed for iron pipe and fixed etc complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all specified and directed.

S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints incl PVC clamp with nut and bolts fixed to walls complete all specified and directed.

S&F PVC (SWR) 110 mm bore bends any radius complete all specified and directed.

S&F for PVC (SWR) 110mm bore Junction (single T) equal or un equal provided with access door complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm all as specified and directed by engr in charge

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed.

S&F 100mm long stain less steel butt hinges medium weight complete all specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section length of bolt 150 mm complete all specified and directed.

M&L for 150mm bore salt-glazed stoneware drain pipes grade 'A' laid in trenches and jointed complete all specified and directed.

M&L for cement Concrete bed (1:3:6) type C2 to drain pipes 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed.

Cutting chases, pinning in, brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all specified and directed.

S&F 15mm bore stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all specified and directed.

M&L for 63 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all specified and directed.

S&F 32 mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms complete all specified and directed.

S&F CP towel rail 60CM long including fitting complete all specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I - Capacity, 1000 Litre complete all specified and directed.

S&F 200 bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all specified and directed.

M&L 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all specified and directed.

S& F 15 mm bore angle stop valve cast copper alloy, chromium plated, fancy type with capstan head, wall flange screwed down screwed for iron pipe and fixed in repairs complete all specified and directed.

M&L cement concrete 1:3:6, Type C-2 (using 40mm graded stone aggregate) as in foundation, filing and mass concrete. complete all specified and directed.

M&Lfor brick work with sub-class 'B' bricks in one and half brick thick honey comb walling built in cement mortar 1:4 for straight or curved on plan to any radius complete all specified and directed.

M&L for Providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks ( for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, boundary ( for stone walling) corbels, brackets, etc. ( of any section indicated) with plain fair faces, including chamfers weatherings throating etc. and setting in cement mortar 1:4 complete all as specified and directed.

M&L Providing precast cement concrete 1:2:4 as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, including chamfers weatherings throating etc. and setting in,cement mortar 1:4 complete with joints to match complete all as specified and directed.

M&L for RCC 1:2:4 (Nominal mix) Type- B1 (20 mm graded stone aggregarte) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:4 mixed with water proofing compound @3% of cement, finshed even and smooth with using extra cement complete all as specified. (WPC shall be measured seperately)

M&L for 20 mm thick rendering on concrete or other than fair face of brick surfaces in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only incl. finishing the surface even and fair(WPC shall be measured and paid seperately)

S&F 75 mm bore cast iron soil, waste and vent pipes, sand cast in any lenght with or without ear with cement joint, fix on wall complete all specified and directed.

S&F Cast iron cowls 75 mm bore complete all specified and directed.

M&L for Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage wells complete all as specified and directed.

S&F CI manhole covers, 600 mm dia, medium weight complete all as specified and directed.

Excavating in post holes in soft / loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface

M&L for 100 mm thick PCC 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregate) as in sub base of flooring complete all as specified.

S&F Glass dividing strips, 3 mm thick and inserted in position to conform to design width of strip 38mm complete all specified and directed.

Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.

Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc all as directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.

M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item Sl No - 128 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.

All as per Item Sl No - 128 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.

All as per Item Sl No - 128 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 4.00 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 4.00 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.

All as per Item Sl No - 128 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.

M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete as directed.

S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.

S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.

Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED retriofit tube 21 watt with Al extruded batten luminaire for 230 volt AC,including LED tube 21 Watt complete all as directed by EIC Make ;Philips Cat Ref-BN021CLED20SPSUCWGRS2 or equivalent model.from the listof makes

Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED retrifit tube 10 watt 2 feet with Al extrudedbatten luminaire for 230 volt AC,including LED tube 10 Watt complete all as directed by EIC Make ;Philips Cat Ref-BN021LED10S-6500PSUGRS1 or equivalant from list of makes.

M&L LED street light of capacity 8 watt in Aluminium PDC housing, toughened glass cover with IP66 protection complete with all accessories with connections pipe including PVC copper wire not exc 5 mtr and all as per model No. Make- philips BRPO22 LED 10 CW MR S1 PSU GR or equivalent from list of make.

Taking down ceiling fan of any size, disconnecting cable end,dismantling blades and removing fan and blades to store for refixing or as directed.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete.

S&F in repair energy efficient, 5 star rated ceiling fan 230V 1200 mm sweep with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed. Make: Havells/Usha/Crompton / Khaitan.

Supply & Fixing TP&N DB 4 way with sheet metal enclouser 415 volts, double door 200 Amp rated bus bar for MCB incl cutting chases exc 10 cm but not exc 20 cm girth for DB and making good distrubed surface area complete all as specified and as directed.

Supply & Fixing DB with sheet metal enclouser 240 volts, 8 way with 200 Amp rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

Supply & Fixing DB with sheet metal enclouser 240 volts, 4 way with 200 Amp rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

S&F MCCB 63Amp, four pole 415 volt breaking capacity 16KA adjustable thermal and adjustable magnatic complete all as specified and directed.

Supply & Fixing MCB DP 240 volts of capacity 40 Amp, C curve, complete all as specified and as directed.

S&F MCB, SP, 10KA, 230V, "C" curve, 06-32 A, ISI Marked complete all as specified and direccted.

S&F MCB, DP, 240 V, "C" curve, O6-32 Amp, ISI Marked complete all as specified and directed.

Material and labour for concealed sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 4 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including surface rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.

Material and labour for concealed sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including surface rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made pf 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead GI strip proctection & common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.

Supply & Fixing MCB double pole (DP) 240 volts of capacity 63 Amp,C curve complete all as specifie and as directed.

S&F in repair exhaust fan AC, single phase, 230/240 V, of size 250 mm seeep steel/aluminium metal body incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete. TURBO LD EXH FAN DBB-G GREY of make usha or equivalent of Havells/Khaitan/Crompton

M&L LED street light of capacity 12 watt in Aluminium PDC housing, toughened glass cover with IP65 protection complete all accessories with connections PVC copper wire not exc 5 mtr and suitable medium grade fixing pipe all as per model No. Make- C&S order code: LTESS12WLED or equivalent from list of make.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in hard/dense soil and getting out and levelling of bottom surface to required level for cable/stay all as directed.

Supply and lay in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 06sqmm 2 core all as specified and as directed.

Supply and fix GI pipe 40mm bore light grade for cable protection complete all as specified and as directed.

Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. (punned thickness shall be measred)

Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.

M S ALOK SAHA

TAPASH SAHA

M/S SUBRATA JOARDAR

SHRI JAYANTA GHOSH