PROVN OF NEW DESIGN GARBAGE BINS AT VARIOUS LOCATIONS IN DOMESTIC AND TECHNICAL AREA AT AFS KANPUR

Amount

Excavation in trenches exc 1.5m wide and not exc. 1.5m depth for foundation etc or for shaft wells, cesspits, manhole, pier etc and getting out in soft loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6.0 m mean radius built in CM 1:4, complete all as specified and directed.

M&L for PCC 1:2:4 type B0, using 12.5 mm graded stone aggregate as in plinth course or damp proofing course complete all as specified and directed.

M&L for reinforcement cement concrete M-20 as in lintel beam complete all as specified and directed.

M&L for form work for roof beams and lintel beams etc complete all as specified and directed.

S&F TMT bars 10 mm dia and over cut to length, bent to shape required, including crancking, bending, spriraly for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips quality complete all as specified and directed.

All as per item No 7 but 5 mm dia and over up to and including 10 mm dia as in stirrups, spaces and binders complete all as specified and directed.

M&L for 15 mm thick rendering on external surface in CM 1:4 on brick masonry walls finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on internal surface in cement mortar 1:6 on brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of surfaces of wall and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed.

M&L preparation of surfaces of wall and applying three coats of white wash on internal surfaces of wall complete all as specified and directed.

M&L for hardcore of broken stone or boulders gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and remmed to a true surface, complete all as specified and directed.

M & L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M & L for 75 mm thick cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate as in plinth protection concrete finish even and smooth without using extra cement complete all as specified and directed.

M & L for 40 mm thick cement concrete type B0,(1:2:4) using 12.5 mm graded stone aggregate as in floors concrete finish even and smooth with using extra cement complete all as specified and directed.

S&F Pre-painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self taping screws complete all as specified and directed.

S&F Pre-painted galvalume sheet aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge or similar work fixed with self tapping screws complete all as specified and directed.

S&F roof trusses (framed), trussed pulins, crane gantries, rails and fasterings and heavy bracket framing (Beam, tee, angle chanel, MS pipes etc) or flat section including distances pieaces cleats etc, Fe-290(Gde E-165) complete all as specified and directed.

S&F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as specified and directed.

S&F for mild steel, plain black sheet 1.60 mm thick as in covering to door/windows shutters chowkats etc including round cut to size and fixed to MS doors/windows shutters frame with welding or riveted or welded complete all as specified and directed.

S&F 3.15 mm dia, welded mild steel wire fabric of mesh, size 30 mm x 30 mm, fixed to steel member such as angle/flat with welding complete all as specified and directed.

M&L preparation of steel surfaces and applying two coats of synthetic enamel paint exceeding 10 cm width or girth over a coat of red oxide primer complete all as specified and directed.

Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil complete all as specified and directed.

M&L machine pressed pre-cast concrete inter locking pavers block of any shape and size confirming to IS 15658-2006 of 60 mm thick, M-35 Grade with finished by using rubber moulded technology consisting of appropriate ratio malamine base super plastisizer imported pigment and surface hardening chemical to match surface of high abresion, resistance and glazed finished with white cement pigment layer upto 10mm thick grey cement and pigment, including filling the gap between tiles and kerb stone with cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate), complete all as specified and directed.

M&L for sand cushioning under floor or in foundations including watering and consolidation complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material to a distance exc 5.0 km out of MD land, complete all as specified and directed.

M&L for writing letter or figures (Block, Roman, Italic or Indian), not exc. 30 cm high complete all as specified and directed.

jayanti associates

M/s R.V. Constructions

Skyline Encon

Deepesh Electricals

M/S SDS Construction Co.

MITHILA BUILDERS AND ENGINEERS

SAXENA BANDHU

MD BUILDER

PUJA SALES CORPORATION

JEEWAN BUILDERS AND ENGINEERS