Repair, renovation of direction office, Chief Account Office, wash room near Sub Division Office, direction office and car garage including vehicle parking near Division office

Amount

Labour engaged for removing of old fixtures on walls fiitting etc (before and after excavations) and clearing the floor of the gaurage and parking for dismentaling olf shutter from the garage

Labour

Providing and fixing PVC panels on wall along with supply including labour complete job

Provind and fixing bead on corners including labour (complete job)

Providing electrification including cutting of walls including inserting wires (complete job)

Proividing and fixing mirror of superior glass including sanitary fitting (complete job)

Dismantling old plaster or skirting ranking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead.

Removal of unhygenic material from designated sites and its diposal as per directions all exclusive

Dismantling of tile work in floors and roofs laid in cement mortar including stacking material within 50 mtr lead For thickness of tile 10mm to 25mm

cement motar 1:3 (1cement : 3 coarse sand) under floor

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & conforming to IS: 15622 of approved make in all colours and shades, laid of 20mm thick cement mortor 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement & matching pigment etc. complete size 600x600cm

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved mahe laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarsesand) including pointing the joints with white cement and matching pigment etc., complete.in colour such as white, ivory, greay, fume red brown

Provision for new wooden doors of washromm including chowkat complete job

Distempering with dry distamper of approved brand and manufacture (one or more coat) and of required shade on old work to give an even shade

Polishing on wood work with ready mix wax polish of approved brand and mafucture on old work

Painting with aluminium paint of approved brand and manufacture to give an even shade one or more coats on old work

Providing and fixing of urinalsin bathroom, one seat, cisten, taps wash basins, with all necessary fittings and electrical fitting(LMR)

Demolishing cement concrete manually /by mechanical means including disposal of material within 50 m lead .In 1:3:6 or richer mix.

Earth work in bulk excavation by manual means over aers (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50M and lift up to 1.5m. All kinds of soil

P/L in position cement conc. of specified grade excluding the cost of centering and shuttering. All work upto plinth level.

1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) crushed

Extra for concrete work in superstructure above floor level V for rach four floors or part thereof

Filling available excavated earth ( excluding rock in trenches plinth sides of foundations etc layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 M and lift upto 1.5 m .

Providing gola 75x75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate : 10mmand down gauge ) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design in 75x75 mm deep chase.

Providing and fixing of sheet PVC above path of wah room of required colour and angles, nuts and bolts etc complete job (LMR)

Supplying and fixing rolling shutters of approved make, made of required size MS laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on speciaklly designated pipes shaft with backets side guide and arrangement for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire spring manufactured from high tensile steel wire of aueduct strength confriming to IS 4454 part I and MS top cover of required thickness for rolling shutters 80x120MM MS laths with 1.20mm thick top cover

Extra for providing mech device chain crank operation for operating rolling shutter. Exceeding 10 sqm and up to 16.80 sqm in the area

Provind and fixing of ball bearing for rooling shutter

Applying priming coat aproved brand and manufacture on steel galvanized iron/ steel works

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shade to give an even shade. (two or more coats) on New work

Cement mortar 1:4 (1 cement: 4 coarse sand) flooring

Provision for wooden strips in floor making LMR

Provision for chain link in parking area including vertical poles

Carriage of material by Mech Transport from source to site of work including loading, unloading and stacking

Sand and agg average diatance 10 Kms