Day to day maintt. and upkeeping of main house building incl. basement 1st floor and 2nd floor HELGs Secretariat internal road and security establishment barracks infrastructure and staff qtr Day to day maintt. and upkeeping of main house building

Amount

Demolishing concrete manually / by Mechanical means including disposal of Material with in 50 mtr. lead in 1:3:6 or richer mix

Demolishing R.C.C work manually / by Mechanical means including stacking of steel bars and disposal of unserviceable Material within 50 mtr. Lead.

Extra for cutting reinforcement bars manually / By Mechanical Means in R.C.C or R.B work (Payment shall be made on the cross sectional area of R.C.C or R.B work).

Extra for scraping, cleaning and straightening reinforcement from R.C.C or R.B work.

Demolishing brick work manually / By Mechanical means incl. stacking of serviceable material and disposal of unserviceable Material with in 50 mtr. Lead (in cement mortar).

Removing mortar from bricks and cleaning bricks incl. stacking with a lead of 50 Mtr. (Stacks of Cleaned bricks shall be measured) from Brick work in cement mortar.

Dismantling doors, windows and clere-story windows (Steel or wood) shutter including chowkhats, architrave, hold fasts etc. Complete and stacking within 50 mtrs. Lead

of area of 3 Sqm. and below

of area beyond 3 Sqm.

Taking out doors, window and clerestory windows, shutters (steel or wood) incl. stacking within 50 mtr. Lead.

of area of 3 Sqm. and below

of area beyond 3 Sqm.

Demolishing brick tile covering in terracing including stacking of serviceable Material and disposal of unserviceable material within 50 mtr. Lead.

Demolishing mud phuska in terracing and disposal of Material within 50 mtr. Lead.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground with in 50 mtr. Lead.

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm. and under including cutting the patch in proper shape raking out joints and preparing the plastering the surface of the wall’s complete including disposal of rubbish to the dumping ground within 50 mtr. Lead. With cement mortar (1:4) 1 cement : 4 fine sand

Renewing glass panes, with putty & Nails wherever necessary.

Float glass panes of thickness 4 mm

Float glass panes of thickness 5 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering grade. All work upto linth level.

1:5:10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40mm nominal size) crushed

1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone agg. 40mm nominal size) crushed

1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 20mm nominal size) crushed

1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size) crushed

Brick work with common burnt clay F.P.S (Non-modular) brick of class designation 7.5 in foundation and plinth in (1 cement : 4 coarse sand)

Extra for brick work in Super structure above plinth level upto floor V level (By manual means)

Extra for brick work in Super structure above floor V level for each four floors or part thereof (By manual means)

Extra for brick work in square or rectangular pillars.

Half brick masonry with bricks of class designation 7.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for halff brick masonry in superstructure above plinth level upto floor V level

Providing and laying damp-proof course /under floor 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size). Crushed

Centering and shuttering including strutting, propping etc and removal of form work for:-

Foundation, footing, bases of columns.

Suspended floors, roofs, Landing, balconies and access platform.

Shelves (Cost in Situ)

Edges of slab and breaks in floors and walls under 20 mm wide

Providing and laying reinforced cement concrete 1:1.5:3 ( 1 cement :1.5 coarse sand :3 graded crushed stone aggregate 20mm nominal size ) beams, suspended floors, landings balconies & staircases etc. having upto 15° slope excluding cost of centering, shuttering all work upto floor V level

Reinforced cement concrete Works in walls (any thickness) including attached pilasters, buttresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts and sturts etc. upto floor five level excluding cost of centering, shuttering, finishing & reinforcement.1.1:5:3 ( 1 cement :1.5 coarse sand :2 graded crushed stone aggregate 20mm nominal size )

Providing and laying in position 1:1.5:3grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

Reinforcement for R.C.C work incuding straightening cutting, bending, placing in position and binding all complete, Thermo - Mechanically treated bars of specified grade) (TMT)

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structutral steel etc. as requierd. In gratings, frames, guard bar ladders railing, brackets, gates & similar work.

Structural steel work in built up welded sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Regrading, terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying plaster gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unservicable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) with in 50 mtr. Lead .

Raking out joints in lime or cement and preparing the surface for repainting or replastering including disposal of rubbish to the dumping ground within 50 mtr. Lead.

White washing with lime to give an shades

Old work (Two or more coats)

Old work ( One or more coats)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth incl. necessary repairs to scratches etc complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even sheds old work (One or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.(one or more coats) on old work.

Painting with Synthetic enamel paint of approved brand incl. manufacture of required Colour to give an even shade (One or more coats on old work)

15 mm cement plaster on the rough side of single or half brick wall of mix

1:6 (1 cement : 6 coarse sand)

1:4 (1 cement : 4 coarse sand)

12 mm cement plaster on the rough side of single or half brick wall of mix

1:6 (1 cement : 6 coarse sand)

1:4 (1 cement : 4 coarse sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface water thinable cement primer.

Finishing wall with acrylic smooth exterior paint of required shade on new work (Two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing cement paint applied @ 2.2 kg/10 sqm.

Finishing walls with water proofing cement paint of required shade

New work (Two or more coats) applied @ 3.84 Kg/10Sqm

Old work (One or more coats) applied @ 2.20 Kg/10Sqm over priming coat of primer applied @ 0.80 ltrs./10 Sqm complete including cost of priming coat.

Applying priming coat

With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel work

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade. New Steel work (Two or move coats)

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

Painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work :

75 mm diameter pipes

100 mm diameter pipes

150 mm diameter pipes

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on oldwork

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on old work.

Providing and applying white cement based putty of average thickness 1mm of approvded brand and manufacture over the plastered wall surfaces to prepare the surafce even and smooth complete.

Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacture over the plastered wall surfaces to prepare the surafce even and smooth complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side upto seven storey height made with 40 mm dia M.S tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S tubes, M.S tube challies, M.S clamps and M.S staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding ststem shall be stiffened with bracings, runner, connection with the building etc. wherever required for inspection of work at required locations with essential safty features for the workmen etc complete as per directions and approval of Engineer-in-charge.The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done.

Providing and fixing polythelene Aluminium polythelene (PE-AL-PE) composite pressure pipes conforming to IS : 15450-U.V stabilised with carbon black having thermal for hot and cold water supply, capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbows, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes testing of joints complete as per direction of the Engineer-in-charge.Internal work-Exposed on wall

1216 (16mm OD) pipe

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing Polyethelene-Aluminium Polythelene (PE-AL-PE) Composite presure pipes conforming to IS:15450 U.V stabilised with carbon black having thermal stability for hot and cold water supply , capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbows, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge (concealed work including cutting chases and making good the wall etc).

1216 (16mm OD) pipe

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc Internal work-Exposed on wall (Parkash Surya Make)

15 mm dia nominal bore (Medium)

20 mm dia nominal bore (Medium)

25 mm dia nominal bore (Medium)

32 mm dia nominal bore (Medium)

Providing and fixing G.I Pipes complete with G.I fittings including trenching and refilling etc (External work) (Parkash Surya Make)

15 mm dia nominal bore (Medium)

20 mm dia nominal bore (Medium)

25 mm dia nominal bore (Medium)

32 mm dia nominal bore (Medium)

40 mm dia nominal bore (Medium)

Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work) 15 mm dia nominal bore (Medium) (Parkash Surya Make)

Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work) 20 mm dia nominal bore (Medium) (Parkash Surya Make)

Providing and fixing G.I union in G.I pipe including cutting and threading the pipe and making long screws etc complete. (Unique/DRP make)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

Painting G.l. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

Cutting holes in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete

upto 15x15 cm

Providing and fixing PVC Pipe including jointing with seal ring (Finolex / Supreme ) of pressure @ 4 kg/cm²

75 MM dia pipe

110 MM dia pipe

150 MM dia pipe

200 MM dia pipe

Providing and fixing PVC moulded fittings/accessories for PVC pipes including jointing with seal ring complete (Finolex / Supreme make)

75mm dia Plain bend

75mm dia Door bend

75mm dia Cowl

110 mm dia Plain Bend

110 mm dia Door Bend

110 mm dia Door Tee

110 mm dia Tee junction

Reducer Tee 110 MM dia to 75mm dia

Cowl 110 MM dia

75MM dia Door Tee

150MM dia Plain Bend

150MM dia Door Bend

Providing and fixing PVC floor trap of Finolex / Supreme make.

Providing and fixing water closet squtting pan Indian type (Orrisa pattern) white vitreous china w.c pan of size 580x440 mm with integral type foot rests (Hindware / Cera/Parryware make) with 100 mm PVC P&S Trap including cutting and making good the walls and floors wherever required.

Providing and fixing white vitreous china pedestals type water closet (Hindware/Cera/Parryware make) (European type w.c pan) with 100 mm PVC P&S trap including cutting and making good the walls and floors wherever required.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required (Hindware/Cera/Parryware make)

Size 550 x 400mm

Size 630x450 mm

Providing and fixing white vitreous china pedestal for wash Basin completely recessed at the back for the reception of pipes and fittings. (Hindware / Cera/Parryware make)

Providing and fixing round wash Basin white vitreous china 450 mm dia complete (Hindware / Cera/Parryware make)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340 x 410 x 265mm size respectively. (Hindware / Cera/Parryware make)

Providing and PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete. (Hindware / Cera / parry ware make). (10 lts. Capacity) white.

PVC Connection forflushing cistern, wash basin, sinks etc.

450 mm long

600 mm long

Providing and fixing white solid plastic seat with lid for pedestal type w.c pan complete (Hindware / Cera / Parry ware make).

Providing and fixing 18mm stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by White Agaria Marble Stone/Granite stone of approved shade by cutting a chase of appropriate width withchase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth.

Providing and fixing white vitrious china laboratory sink with C.I barackets C.P brass chain with rubber plug 40mm C.P Brass waste and 40mm C.P brass trap with necessary C.P brass unions complete including painting of fittings and brackets, cutting and making good the walls wherever required.(Hindware / Cera / Parry ware make)

450x300x150 mm size

600 x 450x 200 mm size

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S:13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets cutting and making good the walls wherever required:-

610x460mm bowl depth 200mm

470x420 mm bowl depth 178mm

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete Flexible pipe 32 mm dia

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete rigid pipe 32 mm dia

Providing and fixing PVC fittings (Paryag make)

Pillar cock

Short nose bib cock

Long nose bib cock

Angle cock/valve

Providing and fixing C.P fitting (Jaquar (Essco) /Marc/Cera make)

Pillar Cock

Short Nose bib cock

Long Nose bib cock

Angle Valve

Mixer for wash Basin

Mixer for bathing (Wall mixer)

Swan Neck left / right tap

Providing and fixing sanitary fittings complete

C.P Jet with Rod complete

C.P Gratings 4"

C.P Gratings 6"

C.P Extension Nipple 1"

C.PExtension Nipple 2"

Soap dish

C.P Towel Rod 2'-0" (20 mm dia)

C.P Towel Rod 1'-6" (20 mm dia)

Towel Ring 200 mm dia

waste coupling for wash basin 32 mm dia

waste coupling for Laboratory sink 50 mm dia

Shower with Arm

Conceled Stop Cock with Head

Glass shelves of superior quality 440 mm long, 124 mm width.

Providing and fixing mirror of superior glass and of required shape and size with Dark mirror moulding (Fancy looking glass)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]

Construction brick masonary manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cm and 45cm deep including angle Iron frame 50x50x6mm and precast RCC slab cover with 40x40x5mm frame (2'-0" x 2'-0") with F.P.S bricks with class designation 75 & with crushed stone aggregate.

Extra for depth. for man holes of Size 90x80cm

Demolishing W.C platform cement concrete and disposal of unserviceable material upto dumping site at ground floor road side. (maximum 3'-0" x4'-0"x1'-6" )

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener of required dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for reparately). For fixed portion

Anodised alumnium (anodised transparent or dyed to required shade according to IS:1868 minimum anodic coating of grade AC 15).

Powder coated aluminium (minimum thickness of powder coated 50 microns)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener of required dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for reparately). For fixed portion For shutters of doors, windows & ventilators incl. providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprane gasket required (fittings shall be paid for separately).

Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868 minimum anodic coating of grade AC 15).

Powder coated aluminium (minium thickness of powder coated 50)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (confirming to IS 12823 grade I type II) in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass / stainless steel screws etc complete as per architectural drawing and directions of Engineer-in-charge. Pre laminated particle board with decorative lamination on both sides.

Repair to Aluminium Door shuuers including refixing/fixtures/ACP sheets rubber gasket/aluminium beeding etc. complete ( Cost of ACP sheet paid sepretely

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawing and directions of Engineer-in-charge (Cost of aluminium snap beading shall be paid in basic items with floating glass panes of 5.50 mm thickness (weight not less then 13.50 kg/Sqm.) (Saint Gobin/Modi Guard)

Providing and fixing double action hydraulic floor fixing of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg for door, incl. cost of cutting floors embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece MS sheet outer box with slide plate etc complete as per the direction of Engineer-in-charge with stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing alumnium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc complete

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete.

Providing and fixing alumnium handles ISI marked anodised (anodic coating not less than grade AC as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete.

Providing and fixing in position collapsible steel shutters with vertical channels 20x 10x2 mm and braced with flat iron diagonals 20 x5 mm size with top and bottom rail of T- iron 40x40x6mm with 40 mm dia, steel pulleys complete with bolts, nuts, locking arrangment, stoppers, handles, including applying a priming coat of approved steel primer.

Providing & fixing panelled or panelled & glazed shutters for Doors and windows & clerestoy windows incl. ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid separately, all complete as per direction of Engineer-in-charge.

Second class Deodar wood : 30mm thick

Second class Deodar wood : 35mm thick

Providing & fixing panelling or panelling & glazing in panelled or panelled and glazed shutters for doors, windows & clerestory windows (Area of opening for panel insert excluding portion inside Grooves or rebates to be measured) panelling for panelled or panelled & Glazed shutters 25mm to 40mm particle board 12mm thick, Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing 35mm thick wire gauge shutters using Galvanised M.S wire gauge of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors, windows and clear story windows with hinges and necessary screw & including ISI marked bright M.S bright finished M.S Butt hinges with neceaasry screw of required size. Second Class Deodar wood.

Providing and fixing wooden moulded beading to doors & windows frames with iron screws, plugs & priming coat on unexposed surface etc complete. 2nd class Teak wood

Providing & fixing curtain Rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass Brackets fixed with C.P Brass screws & wooden plugs etc wherever necessary complete.

12mm dia

20mm dia

Providing and fixing tiles false ceiling of approved material of 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @ 120 Sqm. both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30 thick sheet 1200mm lay spaced between man "T" at 600mm center to center to form a grid of 1200x600mm and secondary cross "T" of length 600mm size 24x25mm made of 0.30 mm thick sheet to be interlocked at middle of 1200 x 600mm panel to form grids of 600x600 and wall angle of size 24x24x0.30mm laying false ceiling tiles of approved texture in the grid. including, wherever required cutting/making, opening for services like diffusers, grills, light fittings, fixtures smoke detectors etc Main "T" runners to be suspsnded form ceiling using G.I slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mtr. long dash fasterners 4mm G.I adjustable rods with galvanised butterfuly level clips of size 85x30x0.8mm spaced at 1200mm center to center along main T, bottom GI Metal ceiling lay in perforated Tegular edge globawhite color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop made of GI sheet having galvanizing of 100 gm/sqm (both sides inclusive) and 20% perforationarea with 1.8 mm dia holes and having NCR (Noice Reduction Coefficient) of 0.5 electro statically polyesterpowder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick

Extra for every additional 1 cm thickness of mud phaska.

Providing gola 75 x 75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone 10mm down gauge) incl. finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75 x 75mm deep chase.

Making khurras 45x45 em with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing of water proofing treatment to the roof slab, W.C and bathrooms by Austrian technology using diamond shield and fiber mesh covered with two or more coats of specified chemical or using FOSROC, SIKA of BASF water proofing chemical. A primer coat of specified chemical to be applied before fixing/ laying of fiber mesh, complete

Providing and laying water proofing treatment in sunkan portion of WCs, bathroom etc. by applying cement slurry mixed water proofing cement compound consisting of applying. a) After surface preparation, first layer of slurry of cement @0.488 Kg/Sqm mixed with water proofing cement compound @0.253 Kg/sqm. This layer will be allowed to air cure for 4 hours. b)Second layer of sullary of cement @ 04242 Kg/Sqm mixed with water proofing cement compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curring for 48 hours. The Rates includes prepration of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed water proofing cement compound consisting of applying. a) After surface preparation, first layer of slurry of cement @0.488 Kg/Sqm mixed with water proofing cement compound @0.253 Kg/sqm b) Laying of second layer of fiber glass cloth when the first layer is still green.Overlaps of joints of fiber cloth should not be less than @0.253kg/sqm c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @0.670 kg/sqm and coarse sand @1.289 kg/sqm.This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around d) forth and final layer of brick tiling with cement mortor (Which will be paid for separately) for the purpose of measurement the entire terated suface will be measured.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement incl. cement slurry but excluding the cost of nosing of steps etc complete.

40 mm thick with 20 mm nominal size stone agg (Crushed)

50 mm thick with 20 mm nominal size stone agg (Crushed)

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)..Make Khajaria/Rak.

Size of tile 500x500 mm

Size of tile 600x600 mm

Size of tile 800x800 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge.

Size of tile 500x500 mm

Size of tile 600x600 mm

Size of tile 800x800 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.

Size of tile 500x500 mm

Size of tile 600x600 mm

Size of tile 800x800 mm

Providing and fixing Anti-skid premium tiles on floor (thickness to be specified by the manufacturers) of Ist quality of RAK, KAJARIA make in any colour laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete.

Providing and laying vitrified floor tiles of size 600 x600 mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Disposal of unserviceable dismentled material/waste mulba by Mechanical transportation outside Municipal limits incl. cost of loading, unloading, stacking complete (Trolly)

Grinding and polishing old terrazo flooring/Skirting with floor polish of specified brand for smooth finishing including disposal of waste material of grinding/ polishing from site of work to dumping site at ground floor.

Providing and fixing gang saw cut mirror polished (pre moalded and pre polished) machine cut for granite of any color or shade Area of slab over 0.5 sqm in kitchen, platform, vanity counters, window sills facias and similar locations of required size of approved shade colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement matching pigment, epoxy touch ups including rubbing moulding and polishing to edge to give high gloss finisg etc complete at all levels.

16mm thick

18mm thick

Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-charge. Granite work

Extra for providing frosted Glass Panes 10 Kg /Sqm. (4mm Thick) instead of ordinary float Glass Panes 10 Kg/Sqm. in Doors, Windows and clerestory window shutters (Area of opening for Glass Panes excluding Portion inside rebate shall be measured).

Providing and fixing M.S Wire gauze to old wood shutters/steel shutters including removing and fitting of shutters complete

Providing and fixing M.S Grills of required pattern in frames of windows etc with M.S Flats square or round bars etc incl. priming coat with approved steel primer all complete.

Fixed to steel windows by welding

Fixed to openings / wooden frames

AMC for GYM Items including maintanance tightining of scrwe for time to time as per necessity at site

Providing and fixing PVC Panelling in walls 5 to 10 mm thick including all fittings and fixtures complete ( Wall Affair or any equivalent make)

Carriage of material by M.T including loading , unloading complete

Sand, Aggregate upto 40mm for an avg. Distance of 8 km

Good Earth avg. for an avg. Distance of 15 km

Crusher Bajri for an avg. Distance of 8 km

Bricks avg.for an avg. Distance of 15km

Bricks Tiles for an avg. Distance of 15 km

Aluminium sheet for doors 1mm thick

Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete. sqm 3852.20

Desmentling of Pebbble desh plaster tiles on outer walls by way of chisel & hammer complete job including dispoal of rubbish job including disposal of rubbish outside muncipal limit

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished welded type tubes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing) having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

15mm nominal outer dia pipes.

20 mm nominal outer dia pipes.

25 mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.) having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

15mm nominal outer dia pipes.

20 mm nominal outer dia pipes.

25 mm nominal outer dia pipes.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing 6 mm water proof ply complete job

Providing and fixing 12 mm water proof ply complete job

Providing and fixing 19 mm water proof ply complete job

Providing and fixing gun metal gate valve with CI wheel of appoved quality

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65mm nominal bore

80 mm nominal bore

Providing corrugated G. S. sheet 0.63 mm thick with zinc coating not less than 275 gram/m2 in roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Extra for straight cutting in C.G.S. sheet 0f 0.63 mm thick in roofing for making opening of area exceeding 40sq.decimetre for chimney stacks, sky light etc.

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hardwood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces ofshutters.35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge.(Door handle, lock and stopper etc.to be paid separately).

Supply and installation of Armstrong Medintech Plus PUR homogeneous vinyl sheet flooring, Inc, 2 metre wide and overall thickness of 2mm. The thickness of wear layer would be 2mm. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC with TRUESHIELD technology, Plasticizers without DOP, Urethane, color pigments and filler calendered to form a sheet. Color and pattern details shall be dispersed throughout the thickness of the wear layer. Medintech Plus shall conform to group "T" wear resistance as per EN 649, Clean Room certified with class 'A' as per ASTMF5100, Flammability resistance of class Bfl-s1 as per GB8624-2006, Dynamic coefficient of friction of class DS as per EN 13893, Thermal Resistance of 0.072m2K/W as per EN 12667, Thermal conductivity of 0.071W/mK as per EN12524, impact sound reduction of 3dB as per ISO 10140, Slip Resistance of class R9 as peDIN 51130, Residual indentation of 0.03mm as per GB/T 4085-2005, Color fastness rating of ≥6 as per ISO 105-B02, total weight being 2.8kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria,resistance to chemical, resistance to staining,suitability to castor chair. The product shall be FloorScore certified with no SVHC content published by European Chemicals Agency(REACH). Product shall contribute to LEED points under Indoor environmental quality(LEED EQ) and Material & Resource (LEED MR) category.

Supply and installation of Armstrong PASTELL Conductive Vinyl Sheet Flooring , 1.83m wide, having a nominal total thickness of 2.2mm. The nominal thickness of the wear layer would be 2 mm. The product should have a conductive backing of 0.2mm. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments and filler calendared to form a sheet. Colors and pattern detail shall be dispersed throughout the thickness of the wear layer. PASTELL Conductive shall conform to Group P of Wear Resistance as per EN 649, Flammability of class Bfl-s1 as per EN 13501-1, Slip resistance of R9 as per BGR 181, Dynamic Coefficient of friction as DS as per EN 13893, Impact sound reduction of 3 dB as per EN ISO 140-8, Residual indentation of 0.05 mm as per EN 433, Color fastness rating ≥6 as per ISO 105-B02, Vertical resistance(R1) less than 106Ω as per EN 1081, Static electrical charge of ≤2.0kV as per EN 1815, Thermal resistance of 0.01m²K/W as per EN 12667, Thermal conductivity of 0.25 W/mK as per EN 12524. PASTELL conductive shall exhibit ESD properties as following - Vertical resistance less than 3.5x10^6Ω as per EN 61340-4-1, Static electrical charge - system test less than 100V as per EN 61340-4-5.The class of use of PASTELL Conductive is 23/34/43 as per EN 685.

Providing and fixing single piece slim concealed cistren make jaquar complete Job

Providing and fixing control plate opal for europen type w.c seat make jaquar complete Job

Providing and fixing Metropole flush valve for europen type w.c seat make jaquar complete Job

Water proofing of all surface including cleaning the surface with wire brush to make the surface free from all loose dirt/dust partical and minar reparing of the surfacr, applying to coats with Dr. fixit pidicratie URP 30 dia water proofing compound ratio 1 bag cement + 3 bags + 5 bags Kg per URP apply Dr. Fixit tourch Dr. fixit torch shield roll with 4' over laping of joint over the parped surface for water proofing the dr. fixit tourch shield mambrane 160 (3 mm thick) are equilvalent and then properly water proofing coat as directed including cost of material carriage complete job including priming coat as per specification.

Providing and fixing 0.5 mm thick Colour Coated sheet including cost of Parlins trusses etc.

Dry clean for carpeting/sofa coushion curtain etc.

Single Curtian/Shear

Double Curtin/Shear

Sofa Back Cover

Sofa Seat Cover Big

Coushion

Bed cover

Billcards sheet

Table Sheet

Blankets

Silky Coushion

Carpet area above 200 Sft

Carpet

Net Curtian

Bed Sheet

Towels all size

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Light shade using white cement

2.5 cm premix carpet surfacing with 2.25cu.m. and 1.12 cum of stone chippings of 13.2 mm and 11.2 size respectively per 100 sq.m. and 52kg. and 56 kg. of hot bitumen per cu.m. of stone chippings of 13.2 mm and11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. including cost of bitumen with all leads, lifts and carriages complete.

Providing and applying tack coat using hot straight run bitumen of grade 80/100 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M.@ 0.75 Kg/sqm. including cost of bitumen.

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Providing and laaying WBM Gr-III with specified curshed stone aggregates 53 to 22.4 mm size including stone screenings 11.20 nominal size and binding material complete incl. sorting, spreading to template and consolidations with power road roller 8 to 10 ton capacity etc. complete. including all leads, lifts and carriages complete.

WOODEN FLOORING Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: Second class teak wood

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints withcoarse sand etc. all complete as per direction of Engineer-in-charge.

Change of upholestory of Sofa's including cost of foam/nails/cloth as per approvedsample D-Decore 905 Seater sofa)

Supplying of following items

Bed Sheet Double of standard make

Blanket Double of Standard make

Quilt Double standard make

Towal Big of Standard make

Towal small of Standard make

White/coloured sheet of standard make (as per approved sample)

Single Bed Sheet

Curtain cloth of standard make as per approved sample including cost of ring etc complete job

Providing and fixing of PreFabricated Structure as follow:- A. Super Structure a) The Vertical columns of RHS size 122 mm x 61mx3.60 mm conforming to IS 5223: 1997 with MS base plate of size 250 mm x250 mm x8 mm and top plate of size 250 mm x250 mm x8 mm shall be errected @ 3.0 mm centre to centre all top and base plate shall be pre drilled with 4 Nos 18 mm dia hole for providing 16 mm dia, 450 mm long bolt each at top and bottom. b. The trussess shall be RH steel section with Principal rafter and bottom chord of section 96 mm x 48 mm x4 mm and all other strut member will be fabricated 66xmm x33 mmx2.90 mm c. The rafter made up of RHS saction 80x40x2.90mm with MS plate of Size 200x150x6 mm welded to both ends of rafter with 04 number 18 mm dia holes to join the Principal rafter plate and col. plate d. Pirlin will be fabricated out of RH steel Saction of size 96x48x4 mm with 6 mm cleats welded at both the ends. e. Sun Shade : Suitable sunsghade made of 0.63 mm thick common flage patten colour coated steel sheet fixed with angle iron from of ISA 40x40x5 mm shall be provided to all external door and window. The minimum projection for sun shade will be 450 mm for window and 600 mm for doors and 300 mm wider then the width of opening. f. The roof will be provided with 0.60 mm thick comou flage pattern colour coated steel profile sheet covering will be fixed with using hot dip 2 in se coated self drilling hexagonal washers head fasteners the sheet shall be laid with minimum end side lape of of 150 mm ridge shall be covered by 0.63 mm thick common flage pattern colour coated steel sheet

g. Roof projection will have minimum projection 450 mm all around the purline will also be extended in the roof at the eves and at gavle roof extension outside the structure h. Main Wall pannel and paritition walls will be made up of 60 mm thick wall pannel which will be made of 0.50 mm thick hot dipped galvanized steel sheet on both side with 50 mm thick layer of rigid CFC free closed sell polyurethane from (with density 40 kg +2 Kg/Cum) insulatation. The wall pannels will be provided with tongue and groove joint will be with camlock systems for interlocking. the base and top channel of size 30x65x1.25 mm thick will be provided for fixing of wall and pannel. The height of wall of wall Pannel will be 3.00 mtr. i. The false ceiling will be aluminium powder coated tile 600x600 x7 mm laid over T channel 30mm x 25 mmx1.25 mm tied with the rafters. j. Door, window and ventilators frame as well as shuttrs shall be aluminium anodized of axtrusion powdrer coated colour coated aluminium section diffrent size as per drawing:- i Windows of size 1175mm x1175mm with three track aluminium saction with sliding shutter (Glazed as well as wire gauze shutter) Top and side member for aluminium three track frame of size 92 mm x31.75 mm x1.5 mm (wt: 1.060 Kg.per metre of Jindal or equivalent make as per IS 1948-1961. three track bottom rail of frame for siinding of shutter of size 92 mm x31.75 mm x1.5 mm (wt. 1.248 kg/ mtr) Top and Botton rail of sliding shutter of size 40x18x1.55mm wt. 0.547 kg/mtr side rail of sliding shutter with handle and self locking arragement saction of size 40x18x1.5mm (wt. 0.47 kg/mtr). Outer sliding shutter shall be provided with 5.5 mm thick transparent glass and inside sliding shutter shall be provided with 0.63 mm thick wire gauze with 1.4 mm apreature both ways fitted with U- clip etc. Shutter shall have roller on top and bottom for smooth functioning ii. Main doors two Nos. of size 1000 mm x2100mm shall be provided with each other shalter as per drawing using diffrent aluminium section with inside shutter having ACP panneling 4 mnm thick/ 5.5 mm thick galazing fitted with rubber packing and aluminium snap beading and outer shutter using 0.63 thick wire gauge 1.4 mm aperature fitted with U-beading shall be fitted. door and window shall be provide with Aluminium handle/L drops/Locks etc. what so ever necessary as per drawing including 60cm x 60cm verified the Paraforation celing. (k) Vitrified tiles 600 x 600mm of KHAJARIA /SOMANY / NITCO / ORIENT or equivalnet make complete incl. cement concrete in 1:4:8 mix (l) cement concrete foundation with plinth beam (m) filling sand / rbm under floor

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a ditance of 50 m outside the periphery of the area cleared.

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures

Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminum tee channels (heavy duty) with rollers, stop end in pelmets as curtain rods.

Providing and fixing Bamboo jaffery/fencing consisting of superior quality 25 mm dia. (average) half cut bamboo placed vertically and fixed together with three number horizontal running members of hollock wood in scantling of section 50x25 mm fixed with nails and G.I. wire on existing support complete as per direction of engineer- in-charge

Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gram/m2

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

French spirit polishing, Two or more coats on new works including a coat of wood filler old work

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats

Finishing walls with water proofing cement paint of required shade Old work (one or more coats applied @ 2.20 kg/10sqm) complete

Re-fixing old glass panes with putty and nails

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)

Providing and fixing brass bib cock of approved quality.

15 mm nominal bore

20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

15 mm nominal bore

20mm nominal bore

25 mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.

Supply of Materials loading unloading and stacking complete & Including carriage upto site of work.

Aggregate upto 40mm

Good earth

Crusher Bajri

Bricks

Bricks Tiles

Stones

Supply of labour for repair works

Black smith Ist class

Carpanter Ist class

Carpenter 2nd class

Mason Ist class

Massa 2nd class

Painter

Plumber

Welder

Sweeper

Aluminium Fitter

Electrician

Mazdoor

Supply of portable Welding machine for various repair work including carriage

Supply of portable generator set including fro carriage

Supply of concrete vibrator (L.T.) including fro carriage

HIRA LAL

SURJEET SINGH SUDAN

SANJAY SOI

Ravinder Singh